mirror of https://github.com/hak5/openwrt.git
275 lines
8.3 KiB
Diff
275 lines
8.3 KiB
Diff
From 4222b39965e1639c0d7a5b4e8b8c8ee91803f799 Mon Sep 17 00:00:00 2001
|
|
From: Lubomir Rintel <lkundrak@v3.sk>
|
|
Date: Tue, 5 May 2015 13:27:45 -0700
|
|
Subject: [PATCH 109/203] mailbox: Enable BCM2835 mailbox support
|
|
|
|
This mailbox driver provides a single mailbox channel to write 32-bit
|
|
values to the VPU and get a 32-bit response. The Raspberry Pi
|
|
firmware uses this mailbox channel to implement firmware calls, while
|
|
Roku 2 (despite being derived from the same firmware tree) doesn't.
|
|
|
|
The driver was originally submitted by Lubomir, based on the
|
|
out-of-tree 2708 mailbox driver. Eric Anholt fixed it up for
|
|
upstreaming, with the major functional change being that it now has no
|
|
notion of multiple channels (since that is a firmware-dependent
|
|
concept) and instead the raspberrypi-firmware driver will do that
|
|
bit-twiddling in its own messages.
|
|
[Jassi: made the 'mbox_chan_ops' struct as const and removed a redundant
|
|
variable]
|
|
|
|
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
|
|
Signed-off-by: Craig McGeachie <slapdau@yahoo.com.au>
|
|
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
|
|
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
---
|
|
drivers/mailbox/Kconfig | 9 ++
|
|
drivers/mailbox/Makefile | 2 +
|
|
drivers/mailbox/bcm2835-mailbox.c | 216 ++++++++++++++++++++++++++++++++++++++
|
|
3 files changed, 227 insertions(+)
|
|
create mode 100644 drivers/mailbox/bcm2835-mailbox.c
|
|
|
|
--- a/drivers/mailbox/Kconfig
|
|
+++ b/drivers/mailbox/Kconfig
|
|
@@ -66,4 +66,13 @@ config ALTERA_MBOX
|
|
An implementation of the Altera Mailbox soft core. It is used
|
|
to send message between processors. Say Y here if you want to use the
|
|
Altera mailbox support.
|
|
+
|
|
+config BCM2835_MBOX
|
|
+ tristate "BCM2835 Mailbox"
|
|
+ depends on ARCH_BCM2835
|
|
+ help
|
|
+ An implementation of the BCM2385 Mailbox. It is used to invoke
|
|
+ the services of the Videocore. Say Y here if you want to use the
|
|
+ BCM2835 Mailbox.
|
|
+
|
|
endif
|
|
--- a/drivers/mailbox/Makefile
|
|
+++ b/drivers/mailbox/Makefile
|
|
@@ -13,3 +13,5 @@ obj-$(CONFIG_OMAP2PLUS_MBOX) += omap-mai
|
|
obj-$(CONFIG_PCC) += pcc.o
|
|
|
|
obj-$(CONFIG_ALTERA_MBOX) += mailbox-altera.o
|
|
+
|
|
+obj-$(CONFIG_BCM2835_MBOX) += bcm2835-mailbox.o
|
|
--- /dev/null
|
|
+++ b/drivers/mailbox/bcm2835-mailbox.c
|
|
@@ -0,0 +1,216 @@
|
|
+/*
|
|
+ * Copyright (C) 2010,2015 Broadcom
|
|
+ * Copyright (C) 2013-2014 Lubomir Rintel
|
|
+ * Copyright (C) 2013 Craig McGeachie
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * This device provides a mechanism for writing to the mailboxes,
|
|
+ * that are shared between the ARM and the VideoCore processor
|
|
+ *
|
|
+ * Parts of the driver are based on:
|
|
+ * - arch/arm/mach-bcm2708/vcio.c file written by Gray Girling that was
|
|
+ * obtained from branch "rpi-3.6.y" of git://github.com/raspberrypi/
|
|
+ * linux.git
|
|
+ * - drivers/mailbox/bcm2835-ipc.c by Lubomir Rintel at
|
|
+ * https://github.com/hackerspace/rpi-linux/blob/lr-raspberry-pi/drivers/
|
|
+ * mailbox/bcm2835-ipc.c
|
|
+ * - documentation available on the following web site:
|
|
+ * https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface
|
|
+ */
|
|
+
|
|
+#include <linux/device.h>
|
|
+#include <linux/dma-mapping.h>
|
|
+#include <linux/err.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/irq.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/mailbox_controller.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/of_address.h>
|
|
+#include <linux/of_irq.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/spinlock.h>
|
|
+
|
|
+/* Mailboxes */
|
|
+#define ARM_0_MAIL0 0x00
|
|
+#define ARM_0_MAIL1 0x20
|
|
+
|
|
+/*
|
|
+ * Mailbox registers. We basically only support mailbox 0 & 1. We
|
|
+ * deliver to the VC in mailbox 1, it delivers to us in mailbox 0. See
|
|
+ * BCM2835-ARM-Peripherals.pdf section 1.3 for an explanation about
|
|
+ * the placement of memory barriers.
|
|
+ */
|
|
+#define MAIL0_RD (ARM_0_MAIL0 + 0x00)
|
|
+#define MAIL0_POL (ARM_0_MAIL0 + 0x10)
|
|
+#define MAIL0_STA (ARM_0_MAIL0 + 0x18)
|
|
+#define MAIL0_CNF (ARM_0_MAIL0 + 0x1C)
|
|
+#define MAIL1_WRT (ARM_0_MAIL1 + 0x00)
|
|
+
|
|
+/* Status register: FIFO state. */
|
|
+#define ARM_MS_FULL BIT(31)
|
|
+#define ARM_MS_EMPTY BIT(30)
|
|
+
|
|
+/* Configuration register: Enable interrupts. */
|
|
+#define ARM_MC_IHAVEDATAIRQEN BIT(0)
|
|
+
|
|
+struct bcm2835_mbox {
|
|
+ void __iomem *regs;
|
|
+ spinlock_t lock;
|
|
+ struct mbox_controller controller;
|
|
+};
|
|
+
|
|
+static struct bcm2835_mbox *bcm2835_link_mbox(struct mbox_chan *link)
|
|
+{
|
|
+ return container_of(link->mbox, struct bcm2835_mbox, controller);
|
|
+}
|
|
+
|
|
+static irqreturn_t bcm2835_mbox_irq(int irq, void *dev_id)
|
|
+{
|
|
+ struct bcm2835_mbox *mbox = dev_id;
|
|
+ struct device *dev = mbox->controller.dev;
|
|
+ struct mbox_chan *link = &mbox->controller.chans[0];
|
|
+
|
|
+ while (!(readl(mbox->regs + MAIL0_STA) & ARM_MS_EMPTY)) {
|
|
+ u32 msg = readl(mbox->regs + MAIL0_RD);
|
|
+ dev_dbg(dev, "Reply 0x%08X\n", msg);
|
|
+ mbox_chan_received_data(link, &msg);
|
|
+ }
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+static int bcm2835_send_data(struct mbox_chan *link, void *data)
|
|
+{
|
|
+ struct bcm2835_mbox *mbox = bcm2835_link_mbox(link);
|
|
+ u32 msg = *(u32 *)data;
|
|
+
|
|
+ spin_lock(&mbox->lock);
|
|
+ writel(msg, mbox->regs + MAIL1_WRT);
|
|
+ dev_dbg(mbox->controller.dev, "Request 0x%08X\n", msg);
|
|
+ spin_unlock(&mbox->lock);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int bcm2835_startup(struct mbox_chan *link)
|
|
+{
|
|
+ struct bcm2835_mbox *mbox = bcm2835_link_mbox(link);
|
|
+
|
|
+ /* Enable the interrupt on data reception */
|
|
+ writel(ARM_MC_IHAVEDATAIRQEN, mbox->regs + MAIL0_CNF);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void bcm2835_shutdown(struct mbox_chan *link)
|
|
+{
|
|
+ struct bcm2835_mbox *mbox = bcm2835_link_mbox(link);
|
|
+
|
|
+ writel(0, mbox->regs + MAIL0_CNF);
|
|
+}
|
|
+
|
|
+static bool bcm2835_last_tx_done(struct mbox_chan *link)
|
|
+{
|
|
+ struct bcm2835_mbox *mbox = bcm2835_link_mbox(link);
|
|
+ bool ret;
|
|
+
|
|
+ spin_lock(&mbox->lock);
|
|
+ ret = !(readl(mbox->regs + MAIL0_STA) & ARM_MS_FULL);
|
|
+ spin_unlock(&mbox->lock);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static const struct mbox_chan_ops bcm2835_mbox_chan_ops = {
|
|
+ .send_data = bcm2835_send_data,
|
|
+ .startup = bcm2835_startup,
|
|
+ .shutdown = bcm2835_shutdown,
|
|
+ .last_tx_done = bcm2835_last_tx_done
|
|
+};
|
|
+
|
|
+static struct mbox_chan *bcm2835_mbox_index_xlate(struct mbox_controller *mbox,
|
|
+ const struct of_phandle_args *sp)
|
|
+{
|
|
+ if (sp->args_count != 0)
|
|
+ return NULL;
|
|
+
|
|
+ return &mbox->chans[0];
|
|
+}
|
|
+
|
|
+static int bcm2835_mbox_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct device *dev = &pdev->dev;
|
|
+ int ret = 0;
|
|
+ struct resource *iomem;
|
|
+ struct bcm2835_mbox *mbox;
|
|
+
|
|
+ mbox = devm_kzalloc(dev, sizeof(*mbox), GFP_KERNEL);
|
|
+ if (mbox == NULL)
|
|
+ return -ENOMEM;
|
|
+ spin_lock_init(&mbox->lock);
|
|
+
|
|
+ ret = devm_request_irq(dev, irq_of_parse_and_map(dev->of_node, 0),
|
|
+ bcm2835_mbox_irq, 0, dev_name(dev), mbox);
|
|
+ if (ret) {
|
|
+ dev_err(dev, "Failed to register a mailbox IRQ handler: %d\n",
|
|
+ ret);
|
|
+ return -ENODEV;
|
|
+ }
|
|
+
|
|
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ mbox->regs = devm_ioremap_resource(&pdev->dev, iomem);
|
|
+ if (IS_ERR(mbox->regs)) {
|
|
+ ret = PTR_ERR(mbox->regs);
|
|
+ dev_err(&pdev->dev, "Failed to remap mailbox regs: %d\n", ret);
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ mbox->controller.txdone_poll = true;
|
|
+ mbox->controller.txpoll_period = 5;
|
|
+ mbox->controller.ops = &bcm2835_mbox_chan_ops;
|
|
+ mbox->controller.of_xlate = &bcm2835_mbox_index_xlate;
|
|
+ mbox->controller.dev = dev;
|
|
+ mbox->controller.num_chans = 1;
|
|
+ mbox->controller.chans = devm_kzalloc(dev,
|
|
+ sizeof(*mbox->controller.chans), GFP_KERNEL);
|
|
+ if (!mbox->controller.chans)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ ret = mbox_controller_register(&mbox->controller);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ platform_set_drvdata(pdev, mbox);
|
|
+ dev_info(dev, "mailbox enabled\n");
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int bcm2835_mbox_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct bcm2835_mbox *mbox = platform_get_drvdata(pdev);
|
|
+ mbox_controller_unregister(&mbox->controller);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static const struct of_device_id bcm2835_mbox_of_match[] = {
|
|
+ { .compatible = "brcm,bcm2835-mbox", },
|
|
+ {},
|
|
+};
|
|
+MODULE_DEVICE_TABLE(of, bcm2835_mbox_of_match);
|
|
+
|
|
+static struct platform_driver bcm2835_mbox_driver = {
|
|
+ .driver = {
|
|
+ .name = "bcm2835-mbox",
|
|
+ .owner = THIS_MODULE,
|
|
+ .of_match_table = bcm2835_mbox_of_match,
|
|
+ },
|
|
+ .probe = bcm2835_mbox_probe,
|
|
+ .remove = bcm2835_mbox_remove,
|
|
+};
|
|
+module_platform_driver(bcm2835_mbox_driver);
|
|
+
|
|
+MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
|
|
+MODULE_DESCRIPTION("BCM2835 mailbox IPC driver");
|
|
+MODULE_LICENSE("GPL v2");
|