openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Felix Fietkau 84a0ad20a2 iw: add support for showing the rx bitrate SVN-Revision: 25442		2011-02-10 03:37:35 +00:00
docs	docs: fix a counting fail	2010-05-29 13:11:48 +00:00
include	use := instead of = for PKG_CONFIG_PATH to prevent recursion	2011-02-06 16:04:33 +00:00
package	iw: add support for showing the rx bitrate	2011-02-10 03:37:35 +00:00
scripts	scripts/diffconfig.sh: use the new kconfig mode to remove some more unnecessary entries in the generated output	2011-01-29 02:35:28 +00:00
target	n810bm: Set minimum voltage threshold to 3200	2011-02-09 20:09:49 +00:00
toolchain	autodetect ARM variant/ABI setup based on the compiler settings	2011-02-02 20:19:28 +00:00
tools	libtool: fix misspelled procedure name...	2011-02-03 20:34:34 +00:00
.gitignore	.gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default	2010-12-04 10:27:13 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	prepare support for libiconv, libintl stub/full switching	2011-02-02 01:26:19 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
rules.mk	remove support for disabling large file support, it is broken, breaks compatibility to anything and has no effect on most packages	2011-01-28 17:00:43 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org