openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Steven Barth 811cd2acf4 6to4: add support for native IPv6 prefix handling SVN-Revision: 35172		2013-01-15 13:08:10 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	netfilter.mk: add addrtype match to iptables-mod-extra (kmod-ipt-extra)	2013-01-14 16:12:56 +00:00
package	6to4: add support for native IPv6 prefix handling	2013-01-15 13:08:10 +00:00
scripts	remove support for ubicom32	2012-11-30 10:53:55 +00:00
target	kernel: port 203-kallsyms_uncompressed.patch and 305-mips_module_reloc.patch to 3.8	2013-01-14 18:55:36 +00:00
toolchain	gcc: fix build for MIPS64 targets introduced by musl patch	2013-01-07 18:16:40 +00:00
tools	adds support for Edimax BR-6524N	2013-01-06 11:11:30 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	kernel: fix enabling coredump support on 3.7+	2013-01-13 11:33:39 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	2012-12-02 15:26:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
rules.mk	rules.mk: only select latest libgcc.a with wildcard match (#12798 )	2013-01-13 20:59:51 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org