openwrt/package/busybox/config/miscutils/Config.in

527 lines
15 KiB
Plaintext

#
# For a description of the syntax of this configuration file,
# see scripts/kbuild/config-language.txt.
#
menu "Miscellaneous Utilities"
config BUSYBOX_CONFIG_ADJTIMEX
bool "adjtimex"
default n
help
Adjtimex reads and optionally sets adjustment parameters for
the Linux clock adjustment algorithm.
config BUSYBOX_CONFIG_BBCONFIG
bool "bbconfig"
default n
help
The bbconfig applet will print the config file with which
busybox was built.
config BUSYBOX_CONFIG_CHAT
bool "chat"
default n
help
Simple chat utility.
config BUSYBOX_CONFIG_FEATURE_CHAT_NOFAIL
bool "Enable NOFAIL expect strings"
depends on BUSYBOX_CONFIG_CHAT
default n
help
When enabled expect strings which are started with a dash trigger
no-fail mode. That is when expectation is not met within timeout
the script is not terminated but sends next SEND string and waits
for next EXPECT string. This allows to compose far more flexible
scripts.
config BUSYBOX_CONFIG_FEATURE_CHAT_TTY_HIFI
bool "Force STDIN to be a TTY"
depends on BUSYBOX_CONFIG_CHAT
default n
help
Original chat always treats STDIN as a TTY device and sets for it
so-called raw mode. This option turns on such behaviour.
config BUSYBOX_CONFIG_FEATURE_CHAT_IMPLICIT_CR
bool "Enable implicit Carriage Return"
depends on BUSYBOX_CONFIG_CHAT
default n
help
When enabled make chat to terminate all SEND strings with a "\r"
unless "\c" is met anywhere in the string.
config BUSYBOX_CONFIG_FEATURE_CHAT_SWALLOW_OPTS
bool "Swallow options"
depends on BUSYBOX_CONFIG_CHAT
default n
help
Busybox chat require no options. To make it not fail when used
in place of original chat (which has a bunch of options) turn
this on.
config BUSYBOX_CONFIG_FEATURE_CHAT_SEND_ESCAPES
bool "Support weird SEND escapes"
depends on BUSYBOX_CONFIG_CHAT
default n
help
Original chat uses some escape sequences in SEND arguments which
are not sent to device but rather performs special actions.
E.g. "\K" means to send a break sequence to device.
"\d" delays execution for a second, "\p" -- for a 1/100 of second.
Before turning this option on think twice: do you really need them?
config BUSYBOX_CONFIG_FEATURE_CHAT_VAR_ABORT_LEN
bool "Support variable-length ABORT conditions"
depends on BUSYBOX_CONFIG_CHAT
default n
help
Original chat uses fixed 50-bytes length ABORT conditions. Say N here.
config BUSYBOX_CONFIG_FEATURE_CHAT_CLR_ABORT
bool "Support revoking of ABORT conditions"
depends on BUSYBOX_CONFIG_CHAT
default n
help
Support CLR_ABORT directive.
config BUSYBOX_CONFIG_CHRT
bool "chrt"
default n
help
manipulate real-time attributes of a process.
This requires sched_{g,s}etparam support in your libc.
config BUSYBOX_CONFIG_CROND
bool "crond"
default y
select BUSYBOX_CONFIG_FEATURE_SUID
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
Crond is a background daemon that parses individual crontab
files and executes commands on behalf of the users in question.
This is a port of dcron from slackware. It uses files of the
format /var/spool/cron/crontabs/<username> files, for example:
$ cat /var/spool/cron/crontabs/root
# Run daily cron jobs at 4:40 every day:
40 4 * * * /etc/cron/daily > /dev/null 2>&1
config BUSYBOX_CONFIG_DEBUG_CROND_OPTION
bool "Support option -d to redirect output to stderr"
depends on BUSYBOX_CONFIG_CROND
default n
help
-d sets loglevel to 0 (most verbose) and directs all output to stderr.
config BUSYBOX_CONFIG_FEATURE_CROND_CALL_SENDMAIL
bool "Using /usr/sbin/sendmail?"
default n
depends on BUSYBOX_CONFIG_CROND
help
Support calling /usr/sbin/sendmail for send cmd outputs.
config BUSYBOX_CONFIG_CRONTAB
bool "crontab"
default y
select BUSYBOX_CONFIG_FEATURE_SUID
help
Crontab manipulates the crontab for a particular user. Only
the superuser may specify a different user and/or crontab directory.
Note that Busybox binary must be setuid root for this applet to
work properly.
config BUSYBOX_CONFIG_DC
bool "dc"
default n
help
Dc is a reverse-polish desk calculator which supports unlimited
precision arithmetic.
config BUSYBOX_CONFIG_DEVFSD
bool "devfsd (obsolete)"
default n
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
This is deprecated, and will be removed at the end of 2008.
Provides compatibility with old device names on a devfs systems.
You should set it to true if you have devfs enabled.
The following keywords in devsfd.conf are supported:
"CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE",
"PERMISSIONS", "EXECUTE", "COPY", "IGNORE",
"MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT".
But only if they are written UPPERCASE!!!!!!!!
config BUSYBOX_CONFIG_DEVFSD_MODLOAD
bool "Adds support for MODLOAD keyword in devsfd.conf"
default n
depends on BUSYBOX_CONFIG_DEVFSD
help
This actually doesn't work with busybox modutils but needs
the external modutils.
config BUSYBOX_CONFIG_DEVFSD_FG_NP
bool "Enables the -fg and -np options"
default n
depends on BUSYBOX_CONFIG_DEVFSD
help
-fg Run the daemon in the foreground.
-np Exit after parsing the configuration file. Do not poll for events.
config BUSYBOX_CONFIG_DEVFSD_VERBOSE
bool "Increases logging (and size)"
default n
depends on BUSYBOX_CONFIG_DEVFSD
help
Increases logging to stderr or syslog.
config BUSYBOX_CONFIG_FEATURE_DEVFS
bool "Use devfs names for all devices (obsolete)"
default n
help
This is obsolete and will be going away at the end of 2008..
This tells busybox to look for names like /dev/loop/0 instead of
/dev/loop0. If your /dev directory has normal names instead of
devfs names, you don't want this.
config BUSYBOX_CONFIG_EJECT
bool "eject"
default n
help
Used to eject cdroms. (defaults to /dev/cdrom)
config BUSYBOX_CONFIG_FEATURE_EJECT_SCSI
bool "SCSI support"
default n
depends on BUSYBOX_CONFIG_EJECT
help
Add the -s option to eject, this allows to eject SCSI-Devices and
usb-storage devices.
config BUSYBOX_CONFIG_FBSPLASH
bool "fbsplash"
default n
help
Shows splash image and progress bar on framebuffer device.
Can be used during boot phase of an embedded device. ~2kb.
Usage:
- use kernel option 'vga=xxx' or otherwise enable fb device.
- put somewhere fbsplash.cfg file and an image in .ppm format.
- $ setsid fbsplash [params] &
-c: hide cursor
-d /dev/fbN: framebuffer device (if not /dev/fb0)
-s path_to_image_file (can be "-" for stdin)
-i path_to_cfg_file (can be "-" for stdin)
-f path_to_fifo (can be "-" for stdin)
- if you want to run it only in presence of kernel parameter:
grep -q "fbsplash=on" </proc/cmdline && setsid fbsplash [params] &
- commands for fifo:
"NN" (ASCII decimal number) - percentage to show on progress bar
"exit" - well you guessed it
config BUSYBOX_CONFIG_INOTIFYD
bool "inotifyd"
default n
help
Simple inotify daemon. Reports filesystem changes. Requires kernel >= 2.6.13
config BUSYBOX_CONFIG_LAST
bool "last"
default n
select BUSYBOX_CONFIG_FEATURE_WTMP
help
'last' displays a list of the last users that logged into the system.
choice
prompt "Choose last implementation"
depends on BUSYBOX_CONFIG_LAST
default BUSYBOX_CONFIG_FEATURE_LAST_SMALL
config BUSYBOX_CONFIG_FEATURE_LAST_SMALL
bool "small"
help
This is a small version of last with just the basic set of
features.
config BUSYBOX_CONFIG_FEATURE_LAST_FANCY
bool "huge"
help
'last' displays detailed information about the last users that
logged into the system (mimics sysvinit last). +900 bytes.
endchoice
config BUSYBOX_CONFIG_LESS
bool "less"
default y
help
'less' is a pager, meaning that it displays text files. It possesses
a wide array of features, and is an improvement over 'more'.
config BUSYBOX_CONFIG_FEATURE_LESS_MAXLINES
int "Max number of input lines less will try to eat"
default 9999999
depends on BUSYBOX_CONFIG_LESS
config BUSYBOX_CONFIG_FEATURE_LESS_BRACKETS
bool "Enable bracket searching"
default n
depends on BUSYBOX_CONFIG_LESS
help
This option adds the capability to search for matching left and right
brackets, facilitating programming.
config BUSYBOX_CONFIG_FEATURE_LESS_FLAGS
bool "Enable extra flags"
default n
depends on BUSYBOX_CONFIG_LESS
help
The extra flags provided do the following:
The -M flag enables a more sophisticated status line.
The -m flag enables a simpler status line with a percentage.
config BUSYBOX_CONFIG_FEATURE_LESS_FLAGCS
bool "Enable flag changes"
default n
depends on BUSYBOX_CONFIG_LESS
help
This enables the ability to change command-line flags within
less itself.
config BUSYBOX_CONFIG_FEATURE_LESS_MARKS
bool "Enable marks"
default n
depends on BUSYBOX_CONFIG_LESS
help
Marks enable positions in a file to be stored for easy reference.
config BUSYBOX_CONFIG_FEATURE_LESS_REGEXP
bool "Enable regular expressions"
default n
depends on BUSYBOX_CONFIG_LESS
help
Enable regular expressions, allowing complex file searches.
config BUSYBOX_CONFIG_HDPARM
bool "hdparm"
default n
help
Get/Set hard drive parameters. Primarily intended for ATA
drives. Adds about 13k (or around 30k if you enable the
FEATURE_HDPARM_GET_IDENTITY option)....
config BUSYBOX_CONFIG_FEATURE_HDPARM_GET_IDENTITY
bool "Support obtaining detailed information directly from drives"
default n
depends on BUSYBOX_CONFIG_HDPARM
help
Enables the -I and -i options to obtain detailed information
directly from drives about their capabilities and supported ATA
feature set. If no device name is specified, hdparm will read
identify data from stdin. Enabling this option will add about 16k...
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF
bool "Register an IDE interface (DANGEROUS)"
default n
depends on BUSYBOX_CONFIG_HDPARM
help
Enables the 'hdparm -R' option to register an IDE interface.
This is dangerous stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
bool "Un-register an IDE interface (DANGEROUS)"
default n
depends on BUSYBOX_CONFIG_HDPARM
help
Enables the 'hdparm -U' option to un-register an IDE interface.
This is dangerous stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET
bool "perform device reset (DANGEROUS)"
default n
depends on BUSYBOX_CONFIG_HDPARM
help
Enables the 'hdparm -w' option to perform a device reset.
This is dangerous stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
bool "tristate device for hotswap (DANGEROUS)"
default n
depends on BUSYBOX_CONFIG_HDPARM
help
Enables the 'hdparm -x' option to tristate device for hotswap,
and the '-b' option to get/set bus state. This is dangerous
stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA
bool "get/set using_dma flag (DANGEROUS)"
default n
depends on BUSYBOX_CONFIG_HDPARM
help
Enables the 'hdparm -d' option to get/set using_dma flag.
This is dangerous stuff, so you should probably say N.
config BUSYBOX_CONFIG_LOCK
bool "lock"
default y
help
Small utility for using locks in scripts
config BUSYBOX_CONFIG_MAKEDEVS
bool "makedevs"
default n
help
'makedevs' is a utility used to create a batch of devices with
one command.
.
There are two choices for command line behaviour, the interface
as used by LEAF/Linux Router Project, or a device table file.
.
'leaf' is traditionally what busybox follows, it allows multiple
devices of a particluar type to be created per command.
e.g. /dev/hda[0-9]
Device properties are passed as command line arguments.
.
'table' reads device properties from a file or stdin, allowing
a batch of unrelated devices to be made with one command.
User/group names are allowed as an alternative to uid/gid.
choice
prompt "Choose makedevs behaviour"
depends on BUSYBOX_CONFIG_MAKEDEVS
default BUSYBOX_CONFIG_FEATURE_MAKEDEVS_TABLE
config BUSYBOX_CONFIG_FEATURE_MAKEDEVS_LEAF
bool "leaf"
config BUSYBOX_CONFIG_FEATURE_MAKEDEVS_TABLE
bool "table"
endchoice
config BUSYBOX_CONFIG_MAN
bool "man"
default n
help
Format and display manual pages.
config BUSYBOX_CONFIG_MICROCOM
bool "microcom"
default n
help
The poor man's minicom utility for chatting with serial port devices.
config BUSYBOX_CONFIG_MOUNTPOINT
bool "mountpoint"
default n
help
mountpoint checks if the directory is a mountpoint.
config BUSYBOX_CONFIG_MT
bool "mt"
default n
help
mt is used to control tape devices. You can use the mt utility
to advance or rewind a tape past a specified number of archive
files on the tape.
config BUSYBOX_CONFIG_RAIDAUTORUN
bool "raidautorun"
default n
help
raidautorun tells the kernel md driver to
search and start RAID arrays.
config BUSYBOX_CONFIG_READAHEAD
bool "readahead"
default n
depends on BUSYBOX_CONFIG_LFS
help
Preload the files listed on the command line into RAM cache so that
subsequent reads on these files will not block on disk I/O.
This applet just calls the readahead(2) system call on each file.
It is mainly useful in system startup scripts to preload files
or executables before they are used. When used at the right time
(in particular when a CPU bound process is running) it can
significantly speed up system startup.
As readahead(2) blocks until each file has been read, it is best to
run this applet as a background job.
config BUSYBOX_CONFIG_RUNLEVEL
bool "runlevel"
default n
help
find the current and previous system runlevel.
This applet uses utmp but does not rely on busybox supporing
utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc.
config BUSYBOX_CONFIG_RX
bool "rx"
default n
help
Receive files using the Xmodem protocol.
config BUSYBOX_CONFIG_SETSID
bool "setsid"
default n
help
setsid runs a program in a new session
config BUSYBOX_CONFIG_STRINGS
bool "strings"
default y
help
strings prints the printable character sequences for each file
specified.
config BUSYBOX_CONFIG_TASKSET
bool "taskset"
default n
help
Retrieve or set a processes's CPU affinity.
This requires sched_{g,s}etaffinity support in your libc.
config BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY
bool "Fancy output"
default n
depends on BUSYBOX_CONFIG_TASKSET
help
Add code for fancy output. This merely silences a compiler-warning
and adds about 135 Bytes. May be needed for machines with alot
of CPUs.
config BUSYBOX_CONFIG_TIME
bool "time"
default y
help
The time command runs the specified program with the given arguments.
When the command finishes, time writes a message to standard output
giving timing statistics about this program run.
config BUSYBOX_CONFIG_TTYSIZE
bool "ttysize"
default n
help
A replacement for "stty size". Unlike stty, can report only width,
only height, or both, in any order. It also does not complain on error,
but returns default 80x24. Usage in shell scripts: width=`ttysize w`.
config BUSYBOX_CONFIG_WATCHDOG
bool "watchdog"
default y
help
The watchdog utility is used with hardware or software watchdog
device drivers. It opens the specified watchdog device special file
and periodically writes a magic character to the device. If the
watchdog applet ever fails to write the magic character within a
certain amount of time, the watchdog device assumes the system has
hung, and will cause the hardware to reboot.
endmenu