openwrt/target/linux/archs38/dts/axs10x_mb.dtsi

226 lines
4.9 KiB
Plaintext

/*
* Support for peripherals on the AXS10x mainboard
*
* Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/ {
axs10x_mb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0xe0000000 0x10000000>;
interrupt-parent = <&mb_intc>;
clocks {
i2cclk: i2cclk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
#clock-cells = <0>;
};
apbclk: apbclk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
#clock-cells = <0>;
};
mmcclk: mmcclk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
#clock-cells = <0>;
};
};
ethernet@0x18000 {
#interrupt-cells = <1>;
compatible = "snps,dwmac";
reg = < 0x18000 0x2000 >;
interrupts = < 4 >;
interrupt-names = "macirq";
phy-mode = "rgmii";
snps,pbl = < 32 >;
clocks = <&apbclk>;
clock-names = "stmmaceth";
max-speed = <100>;
};
ehci@0x40000 {
compatible = "generic-ehci";
reg = < 0x40000 0x100 >;
interrupts = < 8 >;
};
ohci@0x60000 {
compatible = "generic-ohci";
reg = < 0x60000 0x100 >;
interrupts = < 8 >;
};
/*
* According to DW Mobile Storage databook it is required
* to use "Hold Register" if card is enumerated in SDR12 or
* SDR25 modes.
*
* Utilization of "Hold Register" is already implemented via
* dw_mci_pltfm_prepare_command() which in its turn gets
* used through dw_mci_drv_data->prepare_command call-back.
* This call-back is used in Altera Socfpga platform and so
* we may reuse it saying that we're compatible with their
* "altr,socfpga-dw-mshc".
*
* Most probably "Hold Register" utilization is platform-
* independent requirement which means that single unified
* "snps,dw-mshc" should be enough for all users of DW MMC once
* dw_mci_pltfm_prepare_command() is used in generic platform
* code.
*/
mmc@0x15000 {
compatible = "altr,socfpga-dw-mshc";
reg = < 0x15000 0x400 >;
num-slots = < 1 >;
fifo-depth = < 16 >;
card-detect-delay = < 200 >;
clocks = <&apbclk>, <&mmcclk>;
clock-names = "biu", "ciu";
interrupts = < 7 >;
bus-width = < 4 >;
};
uart@0x20000 {
compatible = "snps,dw-apb-uart";
reg = <0x20000 0x100>;
clock-frequency = <33333333>;
interrupts = <17>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
uart@0x21000 {
compatible = "snps,dw-apb-uart";
reg = <0x21000 0x100>;
clock-frequency = <33333333>;
interrupts = <18>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
/* UART muxed with USB data port (ttyS3) */
uart@0x22000 {
compatible = "snps,dw-apb-uart";
reg = <0x22000 0x100>;
clock-frequency = <33333333>;
interrupts = <19>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
i2c@0x1d000 {
compatible = "snps,designware-i2c";
reg = <0x1d000 0x100>;
clock-frequency = <400000>;
clocks = <&i2cclk>;
interrupts = <14>;
};
i2c@0x1e000 {
compatible = "snps,designware-i2c";
reg = <0x1e000 0x100>;
clock-frequency = <400000>;
clocks = <&i2cclk>;
interrupts = <15>;
};
i2c@0x1f000 {
compatible = "snps,designware-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1f000 0x100>;
clock-frequency = <400000>;
clocks = <&i2cclk>;
interrupts = <16>;
eeprom@0x54{
compatible = "24c01";
reg = <0x54>;
pagesize = <0x8>;
};
eeprom@0x57{
compatible = "24c04";
reg = <0x57>;
pagesize = <0x8>;
};
};
gpio0:gpio@13000 {
compatible = "snps,dw-apb-gpio";
reg = <0x13000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
gpio0_banka: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <0>;
};
gpio0_bankb: gpio-controller@1 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
reg = <1>;
};
gpio0_bankc: gpio-controller@2 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
reg = <2>;
};
};
gpio1:gpio@14000 {
compatible = "snps,dw-apb-gpio";
reg = <0x14000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
gpio1_banka: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <30>;
reg = <0>;
};
gpio1_bankb: gpio-controller@1 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <10>;
reg = <1>;
};
gpio1_bankc: gpio-controller@2 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <8>;
reg = <2>;
};
};
};
};