openwrt/target/linux/ipq806x/patches/0090-ARM-dts-msm-Add-SDHC-c...

76 lines
2.3 KiB
Diff

From 6632619d49f0f90c4d74caad67749864f154cae4 Mon Sep 17 00:00:00 2001
From: Georgi Djakov <gdjakov@mm-sol.com>
Date: Fri, 31 Jan 2014 16:21:56 +0200
Subject: [PATCH 090/182] ARM: dts: msm: Add SDHC controller nodes for MSM8974
and DB8074 board
Add support for the 2 SDHC controllers on the DB8074 board. The first
controller (at 0xf9824900) is connected to an on board soldered eMMC.
The second controller (at 0xf98a4900) is connected to a uSD card slot.
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
---
arch/arm/boot/dts/qcom-apq8074-dragonboard.dts | 13 +++++++++++++
arch/arm/boot/dts/qcom-msm8974.dtsi | 22 ++++++++++++++++++++++
2 files changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index 13ac3e2..92320c4 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -3,4 +3,17 @@
/ {
model = "Qualcomm APQ8074 Dragonboard";
compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
+
+ soc: soc {
+ sdhci@f9824900 {
+ bus-width = <8>;
+ non-removable;
+ status = "ok";
+ };
+
+ sdhci@f98a4900 {
+ cd-gpios = <&msmgpio 62 0x1>;
+ bus-width = <4>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 23aa387..c530a33 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -192,6 +192,28 @@
clock-names = "core", "iface";
};
+ sdhci@f9824900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+ interrupts = <0 123 0>, <0 138 0>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ sdhci@f98a4900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+ interrupts = <0 125 0>, <0 221 0>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
rng@f9bff000 {
compatible = "qcom,prng";
reg = <0xf9bff000 0x200>;
--
1.7.10.4