mirror of https://github.com/hak5/openwrt.git
165 lines
6.1 KiB
Diff
165 lines
6.1 KiB
Diff
From 060a8e3db75ef98fb296b03b8fb0cdfcbcc76c6e Mon Sep 17 00:00:00 2001
|
|
From: Grant Likely <grant.likely@linaro.org>
|
|
Date: Fri, 28 Feb 2014 14:42:46 +0100
|
|
Subject: [PATCH 053/182] of: document bindings for reserved-memory nodes
|
|
|
|
Reserved memory nodes allow for the reservation of static (fixed
|
|
address) regions, or dynamically allocated regions for a specific
|
|
purpose.
|
|
|
|
[joshc: Based on binding document proposed (in non-patch form) here:
|
|
http://lkml.kernel.org/g/20131030134702.19B57C402A0@trevor.secretlab.ca
|
|
adapted to support #memory-region-cells]
|
|
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
|
|
[mszyprow: removed #memory-region-cells property]
|
|
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
[grant.likely: removed residual #memory-region-cells example]
|
|
Signed-off-by: Grant Likely <grant.likely@linaro.org>
|
|
---
|
|
.../bindings/reserved-memory/reserved-memory.txt | 133 ++++++++++++++++++++
|
|
1 file changed, 133 insertions(+)
|
|
create mode 100644 Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
|
|
|
|
diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
|
|
new file mode 100644
|
|
index 0000000..3da0ebd
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
|
|
@@ -0,0 +1,133 @@
|
|
+*** Reserved memory regions ***
|
|
+
|
|
+Reserved memory is specified as a node under the /reserved-memory node.
|
|
+The operating system shall exclude reserved memory from normal usage
|
|
+one can create child nodes describing particular reserved (excluded from
|
|
+normal use) memory regions. Such memory regions are usually designed for
|
|
+the special usage by various device drivers.
|
|
+
|
|
+Parameters for each memory region can be encoded into the device tree
|
|
+with the following nodes:
|
|
+
|
|
+/reserved-memory node
|
|
+---------------------
|
|
+#address-cells, #size-cells (required) - standard definition
|
|
+ - Should use the same values as the root node
|
|
+ranges (required) - standard definition
|
|
+ - Should be empty
|
|
+
|
|
+/reserved-memory/ child nodes
|
|
+-----------------------------
|
|
+Each child of the reserved-memory node specifies one or more regions of
|
|
+reserved memory. Each child node may either use a 'reg' property to
|
|
+specify a specific range of reserved memory, or a 'size' property with
|
|
+optional constraints to request a dynamically allocated block of memory.
|
|
+
|
|
+Following the generic-names recommended practice, node names should
|
|
+reflect the purpose of the node (ie. "framebuffer" or "dma-pool"). Unit
|
|
+address (@<address>) should be appended to the name if the node is a
|
|
+static allocation.
|
|
+
|
|
+Properties:
|
|
+Requires either a) or b) below.
|
|
+a) static allocation
|
|
+ reg (required) - standard definition
|
|
+b) dynamic allocation
|
|
+ size (required) - length based on parent's #size-cells
|
|
+ - Size in bytes of memory to reserve.
|
|
+ alignment (optional) - length based on parent's #size-cells
|
|
+ - Address boundary for alignment of allocation.
|
|
+ alloc-ranges (optional) - prop-encoded-array (address, length pairs).
|
|
+ - Specifies regions of memory that are
|
|
+ acceptable to allocate from.
|
|
+
|
|
+If both reg and size are present, then the reg property takes precedence
|
|
+and size is ignored.
|
|
+
|
|
+Additional properties:
|
|
+compatible (optional) - standard definition
|
|
+ - may contain the following strings:
|
|
+ - shared-dma-pool: This indicates a region of memory meant to be
|
|
+ used as a shared pool of DMA buffers for a set of devices. It can
|
|
+ be used by an operating system to instanciate the necessary pool
|
|
+ management subsystem if necessary.
|
|
+ - vendor specific string in the form <vendor>,[<device>-]<usage>
|
|
+no-map (optional) - empty property
|
|
+ - Indicates the operating system must not create a virtual mapping
|
|
+ of the region as part of its standard mapping of system memory,
|
|
+ nor permit speculative access to it under any circumstances other
|
|
+ than under the control of the device driver using the region.
|
|
+reusable (optional) - empty property
|
|
+ - The operating system can use the memory in this region with the
|
|
+ limitation that the device driver(s) owning the region need to be
|
|
+ able to reclaim it back. Typically that means that the operating
|
|
+ system can use that region to store volatile or cached data that
|
|
+ can be otherwise regenerated or migrated elsewhere.
|
|
+
|
|
+Linux implementation note:
|
|
+- If a "linux,cma-default" property is present, then Linux will use the
|
|
+ region for the default pool of the contiguous memory allocator.
|
|
+
|
|
+Device node references to reserved memory
|
|
+-----------------------------------------
|
|
+Regions in the /reserved-memory node may be referenced by other device
|
|
+nodes by adding a memory-region property to the device node.
|
|
+
|
|
+memory-region (optional) - phandle, specifier pairs to children of /reserved-memory
|
|
+
|
|
+Example
|
|
+-------
|
|
+This example defines 3 contiguous regions are defined for Linux kernel:
|
|
+one default of all device drivers (named linux,cma@72000000 and 64MiB in size),
|
|
+one dedicated to the framebuffer device (named framebuffer@78000000, 8MiB), and
|
|
+one for multimedia processing (named multimedia-memory@77000000, 64MiB).
|
|
+
|
|
+/ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+
|
|
+ memory {
|
|
+ reg = <0x40000000 0x40000000>;
|
|
+ };
|
|
+
|
|
+ reserved-memory {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ ranges;
|
|
+
|
|
+ /* global autoconfigured region for contiguous allocations */
|
|
+ linux,cma {
|
|
+ compatible = "shared-dma-pool";
|
|
+ reusable;
|
|
+ size = <0x4000000>;
|
|
+ alignment = <0x2000>;
|
|
+ linux,cma-default;
|
|
+ };
|
|
+
|
|
+ display_reserved: framebuffer@78000000 {
|
|
+ reg = <0x78000000 0x800000>;
|
|
+ };
|
|
+
|
|
+ multimedia_reserved: multimedia@77000000 {
|
|
+ compatible = "acme,multimedia-memory";
|
|
+ reg = <0x77000000 0x4000000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ /* ... */
|
|
+
|
|
+ fb0: video@12300000 {
|
|
+ memory-region = <&display_reserved>;
|
|
+ /* ... */
|
|
+ };
|
|
+
|
|
+ scaler: scaler@12500000 {
|
|
+ memory-region = <&multimedia_reserved>;
|
|
+ /* ... */
|
|
+ };
|
|
+
|
|
+ codec: codec@12600000 {
|
|
+ memory-region = <&multimedia_reserved>;
|
|
+ /* ... */
|
|
+ };
|
|
+};
|
|
--
|
|
1.7.10.4
|
|
|