openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Hauke Mehrtens 7a82667372 kernel: adm6996: add support for ADM6996L and GPIO interface This patch makes it possible to use adm6996.c on first generation BCM47XX devices with ADM switches. The GPIO bit banging protocol implementation was copied from the old switch driver and adapted to this driver and changed to the mainline kernel GPIO interface. The ADM6996L is different from the ADM6996M which is supported, for both specs are available in the Internet. This was tested on a WRT54GS version 1.0, thank you Dirk Neukirchen for the device. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38698		2013-11-09 19:27:27 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	kernel: update 3.10 to 3.10.18	2013-11-05 08:25:45 +00:00
package	procd: update to latest git head	2013-11-08 21:53:37 +00:00
scripts	build: fix build on Mac OS X 10.9	2013-10-28 15:15:09 +00:00
target	kernel: adm6996: add support for ADM6996L and GPIO interface	2013-11-09 19:27:27 +00:00
toolchain	uClibc: get rid of bogus unused strlcpy definition to fix build errors	2013-10-28 15:15:35 +00:00
tools	tools: adapt addpattern for WD's Range Extender	2013-11-07 22:31:48 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config-kernel.in	buildroot: split Kernel config options to Config-kernel.in	2013-10-24 00:28:33 +00:00
Config.in	buildroot: add lz4 initramfs compression option	2013-10-25 01:48:10 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	2012-12-02 15:26:28 +00:00
README	build: BSD compile fixes	2013-03-07 17:32:29 +00:00
feeds.conf.default	feeds.conf.default: switch packages feed to git (#13818 )	2013-07-05 02:04:40 +00:00
rules.mk	build: include the cpu type as part of the toolchain/target directory name	2013-09-26 17:53:32 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org