mirror of https://github.com/hak5/openwrt.git
5832e754fb
With the BRCM47xx image I have built (Linksys E3000), there are additional writes following the completion of "mtd_replace_jffs2" which invalidate the 'trx_fixup' performed by 'mtd_replace_jffs2'. Moving the 'trx_fixup' to somewhere after all writes have completed fixes the problem. I also noticed that 'erasesize' used to compute 'block_offset' in 'mtd_fixtrx' is used before it is computed by 'mtd_check_open'; moving the call to 'mtd_check_open' up a few lines fixes this. Unlike 'mtd_fixtrx', 'trx_fixup' appears to assume that the TRX header is always at offset 0; which may be the cause of the problem described in Ticket #8960. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 32866 |
||
|---|---|---|
| .. | ||
| Makefile | ||
| bcm_tag.h | ||
| crc32.c | ||
| crc32.h | ||
| fis.c | ||
| fis.h | ||
| imagetag.c | ||
| jffs2.c | ||
| jffs2.h | ||
| mtd.c | ||
| mtd.h | ||
| trx.c | ||