openwrt/target/linux/ramips/dts/rt3883_sitecom_wlr-6000.dts

185 lines
3.0 KiB
Plaintext

/dts-v1/;
#include "rt3883.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "sitecom,wlr-6000", "ralink,rt3883-soc";
model = "Sitecom WLR-6000";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "wlr-6000:red:power";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
};
ops {
label = "wlr-6000:white:ops";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usb {
gpio-export,name = "usb";
gpio-export,output = <1>;
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
};
};
&gpio1 {
status = "okay";
};
&state_default {
gpio {
ralink,group = "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
};
&ethernet {
status = "okay";
mtd-mac-address = <&factory 0x8004>;
mtd-mac-address-increment = <1>;
port@0 {
phy-handle = <&phy0>;
phy-mode = "rgmii";
};
mdio-bus {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
qca,ar8327-initvals = <
0x04 0x07600000 /* PORT0 PAD MODE CTRL */
0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
0x50 0xc437c437 /* LED Control Register 0 */
0x54 0xc337c337 /* LED Control Register 1 */
0x58 0x00000000 /* LED Control Register 2 */
0x5c 0x03ffff00 /* LED Control Register 3 */
0x7c 0x0000007e /* PORT0_STATUS */
0x94 0x0000007e /* PORT6 STATUS */
>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <8600000>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x713000>;
};
partition@763000 {
label = "manufacture";
reg = <0x763000 0x7D000>;
read-only;
};
partition@7E0000 {
label = "backup";
reg = <0x7E0000 0x10000>;
read-only;
};
partition@7F0000 {
label = "storage";
reg = <0x7F0000 0x10000>;
read-only;
};
};
};
};
&pci {
status = "okay";
};
&pci1 {
status = "okay";
wifi@0,0 {
compatible = "pci1814,3091";
reg = <0x10000 0 0 0 0>;
ralink,mtd-eeprom = <&factory 0x8000>;
};
};
&wmac {
status = "okay";
ralink,2ghz = <0>;
ralink,mtd-eeprom = <&factory 0x0>;
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};