openwrt/target/linux/ramips/dts/rt3052_huawei_hg255d.dts

144 lines
2.3 KiB
Plaintext

/dts-v1/;
#include "rt3050.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "huawei,hg255d", "ralink,rt3052-soc";
model = "HuaWei HG255D";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x1000000>;
bank-width = <2>;
device-width = <2>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x40000 0x20000>;
read-only;
};
factory: partition@60000 {
label = "factory";
reg = <0x60000 0x20000>;
read-only;
};
partition@80000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x80000 0xf60000>;
};
partition@fa0000 {
label = "factory-orig";
reg = <0xfa0000 0x20000>;
read-only;
};
};
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "hg255d:green:power";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
internet {
label = "hg255d:green:internet";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
wifi {
label = "hg255d:green:wlan";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
usb {
label = "hg255d:green:usb";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
trigger-sources = <&otg_port1>;
linux,default-trigger = "usbport";
};
wps {
label = "hg255d:green:wps";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
voice {
label = "hg255d:green:voice";
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <10>;
reset {
label = "reset";
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
rfkill {
label = "rfkill";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
};
};
&state_default {
gpio {
ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
ralink,function = "gpio";
};
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
};
&esw {
mediatek,portmap = <0x2f>;
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&otg {
status = "okay";
};