openwrt/target/linux/ramips/dts/mt7628an_wavlink_wl-wn575a3...

126 lines
1.9 KiB
Plaintext

/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "mt7628an.dtsi"
/ {
compatible = "wavlink,wl-wn575a3", "mediatek,mt7628an-soc";
model = "Wavlink WL-WN575A3";
chosen {
bootargs = "console=ttyS0,57600";
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
wifi-high {
label = "wl-wn575a3:green:wifi-high";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
wifi-med {
label = "wl-wn575a3:green:wifi-med";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
wifi-low {
label = "wl-wn575a3:green:wifi-low";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
wps {
label = "wl-wn575a3:green:wps";
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
};
};
};
&state_default {
gpio {
ralink,group = "i2c", "wled_an", "gpio", "refclk", "wdt", "p0led_an";
ralink,function = "gpio";
};
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
&wmac {
status = "okay";
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
};
&esw {
mediatek,portmap = <0x2f>;
};