openwrt/target/linux/ramips/dts/DIR-610-A1.dts

103 lines
1.5 KiB
Plaintext

/dts-v1/;
#include "rt5350.dtsi"
/ {
compatible = "DIR-610-A1", "ralink,rt5350-soc";
model = "D-Link DIR-610 A1";
gpio-leds {
compatible = "gpio-leds";
status {
label = "dir-610-a1:green:status";
gpios = <&gpio0 9 1>;
};
wps {
label = "dir-610-a1:green:wps";
gpios = <&gpio0 13 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
devdata: partition@30000 {
label = "devdata";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
};
};
&ethernet {
mtd-mac-address = <&devdata 0x4004>;
};
&esw {
status = "okay";
mediatek,portmap = <0x2f>;
mediatek,led_polarity = <0x17>;
};
&wmac {
status = "okay";
ralink,led-polarity = <1>;
ralink,mtd-eeprom = <&devdata 0x4000>;
};