openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

John Crispin 76c79f50d7 lantiq: Fixes to athxk EEPROM loading Use platform data array for storing ath5k EEPROM instead of creating another one. EEPROM size is 2048 words (2 bytes), so we must read 4096 bytes from flash. No need to keep the checksum fix now that the EEPROM is loaded completely. Add a manual eeprom swap for ath9k and keep the endian way. Use mac-offset property retrieved from the DTS. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 36901		2013-06-10 08:25:12 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	target: split jffs2 NAND out of jffs2	2013-06-05 20:58:03 +00:00
package	procd: make the preinit rules wildcard all buttons for failsafe	2013-06-10 08:24:44 +00:00
scripts	target: split jffs2 NAND out of jffs2	2013-06-05 20:58:03 +00:00
target	lantiq: Fixes to athxk EEPROM loading	2013-06-10 08:25:12 +00:00
toolchain	gcc: fix arm libgcc issues with 4.8.0 and 4.8-linaro	2013-06-05 23:37:12 +00:00
tools	tools: add Broadcom cable modem firmware image creator	2013-06-06 22:21:52 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	target: split jffs2 NAND out of jffs2	2013-06-05 20:58:03 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	2012-12-02 15:26:28 +00:00
README	build: BSD compile fixes	2013-03-07 17:32:29 +00:00
feeds.conf.default	move packages related to telephony into its own feed	2013-04-29 02:17:02 +00:00
rules.mk	toolchain: eliminate the INSTALL_LIBSTDCPP config symbol and make c++ support mandatory - fixes recursive config symbol dependency issues	2013-05-09 20:50:49 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org