openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Jo-Philipp Wich 75bbf1bf20 6in4: fix typo in last commit SVN-Revision: 22710		2010-08-19 01:06:10 +00:00
docs	docs: fix a counting fail	2010-05-29 13:11:48 +00:00
include	Also support parallel build for host-packages	2010-08-18 14:23:06 +00:00
package	6in4: fix typo in last commit	2010-08-19 01:06:10 +00:00
scripts	Fix dl_cleanup.py	2010-08-10 15:08:02 +00:00
target	generic: rtl8366: allow use of VIDs 16-4095 if vlan4k is enabled	2010-08-18 16:00:39 +00:00
toolchain	toolchain/gcc: remove remaining references to gcc-3.4.6	2010-08-18 11:04:45 +00:00
tools	quilt: needs autoconf	2010-08-14 22:58:55 +00:00
.gitignore	.gitignore: Undo accidental commit.	2010-05-10 17:59:05 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	Support parallel build of certain packages	2010-08-18 13:57:58 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	fix for GREP_OPTIONS	2010-07-31 22:32:21 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	Add lxde feed to feeds.conf.default	2010-08-12 19:03:44 +00:00
rules.mk	fix for GREP_OPTIONS	2010-07-31 22:32:21 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org