mirror of https://github.com/hak5/openwrt.git
543 lines
19 KiB
Diff
543 lines
19 KiB
Diff
From 2887442bd13bc8be687afc7172cb01c2b7f0dd3b Mon Sep 17 00:00:00 2001
|
|
From: Yangbo Lu <yangbo.lu@nxp.com>
|
|
Date: Thu, 5 Jul 2018 17:41:14 +0800
|
|
Subject: [PATCH 31/32] flexcan: support layerscape
|
|
|
|
This is an integrated patch for layerscape flexcan support.
|
|
|
|
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
|
|
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
|
|
Signed-off-by: Sakar Arora <Sakar.Arora@freescale.com>
|
|
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
|
|
---
|
|
drivers/net/can/flexcan.c | 212 ++++++++++++++++++++++----------------
|
|
1 file changed, 123 insertions(+), 89 deletions(-)
|
|
|
|
--- a/drivers/net/can/flexcan.c
|
|
+++ b/drivers/net/can/flexcan.c
|
|
@@ -184,6 +184,7 @@
|
|
* MX53 FlexCAN2 03.00.00.00 yes no no no
|
|
* MX6s FlexCAN3 10.00.12.00 yes yes no yes
|
|
* VF610 FlexCAN3 ? no yes yes yes?
|
|
+ * LS1021A FlexCAN2 03.00.04.00 no yes no yes
|
|
*
|
|
* Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
|
|
*/
|
|
@@ -260,6 +261,10 @@ struct flexcan_priv {
|
|
struct flexcan_platform_data *pdata;
|
|
const struct flexcan_devtype_data *devtype_data;
|
|
struct regulator *reg_xceiver;
|
|
+
|
|
+ /* Read and Write APIs */
|
|
+ u32 (*read)(void __iomem *addr);
|
|
+ void (*write)(u32 val, void __iomem *addr);
|
|
};
|
|
|
|
static struct flexcan_devtype_data fsl_p1010_devtype_data = {
|
|
@@ -276,6 +281,10 @@ static struct flexcan_devtype_data fsl_v
|
|
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_DISABLE_MECR,
|
|
};
|
|
|
|
+static const struct flexcan_devtype_data fsl_ls1021a_r2_devtype_data = {
|
|
+ .quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_DISABLE_MECR,
|
|
+};
|
|
+
|
|
static const struct can_bittiming_const flexcan_bittiming_const = {
|
|
.name = DRV_NAME,
|
|
.tseg1_min = 4,
|
|
@@ -288,32 +297,38 @@ static const struct can_bittiming_const
|
|
.brp_inc = 1,
|
|
};
|
|
|
|
-/* Abstract off the read/write for arm versus ppc. This
|
|
- * assumes that PPC uses big-endian registers and everything
|
|
- * else uses little-endian registers, independent of CPU
|
|
- * endianness.
|
|
+/* FlexCAN module is essentially modelled as a little-endian IP in most
|
|
+ * SoCs, i.e the registers as well as the message buffer areas are
|
|
+ * implemented in a little-endian fashion.
|
|
+ *
|
|
+ * However there are some SoCs (e.g. LS1021A) which implement the FlexCAN
|
|
+ * module in a big-endian fashion (i.e the registers as well as the
|
|
+ * message buffer areas are implemented in a big-endian way).
|
|
+ *
|
|
+ * In addition, the FlexCAN module can be found on SoCs having ARM or
|
|
+ * PPC cores. So, we need to abstract off the register read/write
|
|
+ * functions, ensuring that these cater to all the combinations of module
|
|
+ * endianness and underlying CPU endianness.
|
|
*/
|
|
-#if defined(CONFIG_PPC)
|
|
-static inline u32 flexcan_read(void __iomem *addr)
|
|
+static inline u32 flexcan_read_be(void __iomem *addr)
|
|
{
|
|
- return in_be32(addr);
|
|
+ return ioread32be(addr);
|
|
}
|
|
|
|
-static inline void flexcan_write(u32 val, void __iomem *addr)
|
|
+static inline void flexcan_write_be(u32 val, void __iomem *addr)
|
|
{
|
|
- out_be32(addr, val);
|
|
+ iowrite32be(val, addr);
|
|
}
|
|
-#else
|
|
-static inline u32 flexcan_read(void __iomem *addr)
|
|
+
|
|
+static inline u32 flexcan_read_le(void __iomem *addr)
|
|
{
|
|
- return readl(addr);
|
|
+ return ioread32(addr);
|
|
}
|
|
|
|
-static inline void flexcan_write(u32 val, void __iomem *addr)
|
|
+static inline void flexcan_write_le(u32 val, void __iomem *addr)
|
|
{
|
|
- writel(val, addr);
|
|
+ iowrite32(val, addr);
|
|
}
|
|
-#endif
|
|
|
|
static inline int flexcan_transceiver_enable(const struct flexcan_priv *priv)
|
|
{
|
|
@@ -344,14 +359,14 @@ static int flexcan_chip_enable(struct fl
|
|
unsigned int timeout = FLEXCAN_TIMEOUT_US / 10;
|
|
u32 reg;
|
|
|
|
- reg = flexcan_read(®s->mcr);
|
|
+ reg = priv->read(®s->mcr);
|
|
reg &= ~FLEXCAN_MCR_MDIS;
|
|
- flexcan_write(reg, ®s->mcr);
|
|
+ priv->write(reg, ®s->mcr);
|
|
|
|
- while (timeout-- && (flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK))
|
|
+ while (timeout-- && (priv->read(®s->mcr) & FLEXCAN_MCR_LPM_ACK))
|
|
udelay(10);
|
|
|
|
- if (flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK)
|
|
+ if (priv->read(®s->mcr) & FLEXCAN_MCR_LPM_ACK)
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
@@ -363,14 +378,14 @@ static int flexcan_chip_disable(struct f
|
|
unsigned int timeout = FLEXCAN_TIMEOUT_US / 10;
|
|
u32 reg;
|
|
|
|
- reg = flexcan_read(®s->mcr);
|
|
+ reg = priv->read(®s->mcr);
|
|
reg |= FLEXCAN_MCR_MDIS;
|
|
- flexcan_write(reg, ®s->mcr);
|
|
+ priv->write(reg, ®s->mcr);
|
|
|
|
- while (timeout-- && !(flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK))
|
|
+ while (timeout-- && !(priv->read(®s->mcr) & FLEXCAN_MCR_LPM_ACK))
|
|
udelay(10);
|
|
|
|
- if (!(flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK))
|
|
+ if (!(priv->read(®s->mcr) & FLEXCAN_MCR_LPM_ACK))
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
@@ -382,14 +397,14 @@ static int flexcan_chip_freeze(struct fl
|
|
unsigned int timeout = 1000 * 1000 * 10 / priv->can.bittiming.bitrate;
|
|
u32 reg;
|
|
|
|
- reg = flexcan_read(®s->mcr);
|
|
+ reg = priv->read(®s->mcr);
|
|
reg |= FLEXCAN_MCR_HALT;
|
|
- flexcan_write(reg, ®s->mcr);
|
|
+ priv->write(reg, ®s->mcr);
|
|
|
|
- while (timeout-- && !(flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK))
|
|
+ while (timeout-- && !(priv->read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK))
|
|
udelay(100);
|
|
|
|
- if (!(flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK))
|
|
+ if (!(priv->read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK))
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
@@ -401,14 +416,14 @@ static int flexcan_chip_unfreeze(struct
|
|
unsigned int timeout = FLEXCAN_TIMEOUT_US / 10;
|
|
u32 reg;
|
|
|
|
- reg = flexcan_read(®s->mcr);
|
|
+ reg = priv->read(®s->mcr);
|
|
reg &= ~FLEXCAN_MCR_HALT;
|
|
- flexcan_write(reg, ®s->mcr);
|
|
+ priv->write(reg, ®s->mcr);
|
|
|
|
- while (timeout-- && (flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK))
|
|
+ while (timeout-- && (priv->read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK))
|
|
udelay(10);
|
|
|
|
- if (flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK)
|
|
+ if (priv->read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK)
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
@@ -419,11 +434,11 @@ static int flexcan_chip_softreset(struct
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
unsigned int timeout = FLEXCAN_TIMEOUT_US / 10;
|
|
|
|
- flexcan_write(FLEXCAN_MCR_SOFTRST, ®s->mcr);
|
|
- while (timeout-- && (flexcan_read(®s->mcr) & FLEXCAN_MCR_SOFTRST))
|
|
+ priv->write(FLEXCAN_MCR_SOFTRST, ®s->mcr);
|
|
+ while (timeout-- && (priv->read(®s->mcr) & FLEXCAN_MCR_SOFTRST))
|
|
udelay(10);
|
|
|
|
- if (flexcan_read(®s->mcr) & FLEXCAN_MCR_SOFTRST)
|
|
+ if (priv->read(®s->mcr) & FLEXCAN_MCR_SOFTRST)
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
@@ -434,7 +449,7 @@ static int __flexcan_get_berr_counter(co
|
|
{
|
|
const struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
- u32 reg = flexcan_read(®s->ecr);
|
|
+ u32 reg = priv->read(®s->ecr);
|
|
|
|
bec->txerr = (reg >> 0) & 0xff;
|
|
bec->rxerr = (reg >> 8) & 0xff;
|
|
@@ -491,24 +506,24 @@ static int flexcan_start_xmit(struct sk_
|
|
|
|
if (cf->can_dlc > 0) {
|
|
data = be32_to_cpup((__be32 *)&cf->data[0]);
|
|
- flexcan_write(data, ®s->mb[FLEXCAN_TX_BUF_ID].data[0]);
|
|
+ priv->write(data, ®s->mb[FLEXCAN_TX_BUF_ID].data[0]);
|
|
}
|
|
if (cf->can_dlc > 4) {
|
|
data = be32_to_cpup((__be32 *)&cf->data[4]);
|
|
- flexcan_write(data, ®s->mb[FLEXCAN_TX_BUF_ID].data[1]);
|
|
+ priv->write(data, ®s->mb[FLEXCAN_TX_BUF_ID].data[1]);
|
|
}
|
|
|
|
can_put_echo_skb(skb, dev, 0);
|
|
|
|
- flexcan_write(can_id, ®s->mb[FLEXCAN_TX_BUF_ID].can_id);
|
|
- flexcan_write(ctrl, ®s->mb[FLEXCAN_TX_BUF_ID].can_ctrl);
|
|
+ priv->write(can_id, ®s->mb[FLEXCAN_TX_BUF_ID].can_id);
|
|
+ priv->write(ctrl, ®s->mb[FLEXCAN_TX_BUF_ID].can_ctrl);
|
|
|
|
/* Errata ERR005829 step8:
|
|
* Write twice INACTIVE(0x8) code to first MB.
|
|
*/
|
|
- flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
|
|
+ priv->write(FLEXCAN_MB_CODE_TX_INACTIVE,
|
|
®s->mb[FLEXCAN_TX_BUF_RESERVED].can_ctrl);
|
|
- flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
|
|
+ priv->write(FLEXCAN_MB_CODE_TX_INACTIVE,
|
|
®s->mb[FLEXCAN_TX_BUF_RESERVED].can_ctrl);
|
|
|
|
return NETDEV_TX_OK;
|
|
@@ -632,8 +647,8 @@ static void flexcan_read_fifo(const stru
|
|
struct flexcan_mb __iomem *mb = ®s->mb[0];
|
|
u32 reg_ctrl, reg_id;
|
|
|
|
- reg_ctrl = flexcan_read(&mb->can_ctrl);
|
|
- reg_id = flexcan_read(&mb->can_id);
|
|
+ reg_ctrl = priv->read(&mb->can_ctrl);
|
|
+ reg_id = priv->read(&mb->can_id);
|
|
if (reg_ctrl & FLEXCAN_MB_CNT_IDE)
|
|
cf->can_id = ((reg_id >> 0) & CAN_EFF_MASK) | CAN_EFF_FLAG;
|
|
else
|
|
@@ -643,12 +658,12 @@ static void flexcan_read_fifo(const stru
|
|
cf->can_id |= CAN_RTR_FLAG;
|
|
cf->can_dlc = get_can_dlc((reg_ctrl >> 16) & 0xf);
|
|
|
|
- *(__be32 *)(cf->data + 0) = cpu_to_be32(flexcan_read(&mb->data[0]));
|
|
- *(__be32 *)(cf->data + 4) = cpu_to_be32(flexcan_read(&mb->data[1]));
|
|
+ *(__be32 *)(cf->data + 0) = cpu_to_be32(priv->read(&mb->data[0]));
|
|
+ *(__be32 *)(cf->data + 4) = cpu_to_be32(priv->read(&mb->data[1]));
|
|
|
|
/* mark as read */
|
|
- flexcan_write(FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, ®s->iflag1);
|
|
- flexcan_read(®s->timer);
|
|
+ priv->write(FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, ®s->iflag1);
|
|
+ priv->read(®s->timer);
|
|
}
|
|
|
|
static int flexcan_read_frame(struct net_device *dev)
|
|
@@ -685,17 +700,17 @@ static int flexcan_poll(struct napi_stru
|
|
/* The error bits are cleared on read,
|
|
* use saved value from irq handler.
|
|
*/
|
|
- reg_esr = flexcan_read(®s->esr) | priv->reg_esr;
|
|
+ reg_esr = priv->read(®s->esr) | priv->reg_esr;
|
|
|
|
/* handle state changes */
|
|
work_done += flexcan_poll_state(dev, reg_esr);
|
|
|
|
/* handle RX-FIFO */
|
|
- reg_iflag1 = flexcan_read(®s->iflag1);
|
|
+ reg_iflag1 = priv->read(®s->iflag1);
|
|
while (reg_iflag1 & FLEXCAN_IFLAG_RX_FIFO_AVAILABLE &&
|
|
work_done < quota) {
|
|
work_done += flexcan_read_frame(dev);
|
|
- reg_iflag1 = flexcan_read(®s->iflag1);
|
|
+ reg_iflag1 = priv->read(®s->iflag1);
|
|
}
|
|
|
|
/* report bus errors */
|
|
@@ -705,8 +720,8 @@ static int flexcan_poll(struct napi_stru
|
|
if (work_done < quota) {
|
|
napi_complete_done(napi, work_done);
|
|
/* enable IRQs */
|
|
- flexcan_write(FLEXCAN_IFLAG_DEFAULT, ®s->imask1);
|
|
- flexcan_write(priv->reg_ctrl_default, ®s->ctrl);
|
|
+ priv->write(FLEXCAN_IFLAG_DEFAULT, ®s->imask1);
|
|
+ priv->write(priv->reg_ctrl_default, ®s->ctrl);
|
|
}
|
|
|
|
return work_done;
|
|
@@ -720,12 +735,12 @@ static irqreturn_t flexcan_irq(int irq,
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
u32 reg_iflag1, reg_esr;
|
|
|
|
- reg_iflag1 = flexcan_read(®s->iflag1);
|
|
- reg_esr = flexcan_read(®s->esr);
|
|
+ reg_iflag1 = priv->read(®s->iflag1);
|
|
+ reg_esr = priv->read(®s->esr);
|
|
|
|
/* ACK all bus error and state change IRQ sources */
|
|
if (reg_esr & FLEXCAN_ESR_ALL_INT)
|
|
- flexcan_write(reg_esr & FLEXCAN_ESR_ALL_INT, ®s->esr);
|
|
+ priv->write(reg_esr & FLEXCAN_ESR_ALL_INT, ®s->esr);
|
|
|
|
/* schedule NAPI in case of:
|
|
* - rx IRQ
|
|
@@ -739,16 +754,16 @@ static irqreturn_t flexcan_irq(int irq,
|
|
* save them for later use.
|
|
*/
|
|
priv->reg_esr = reg_esr & FLEXCAN_ESR_ERR_BUS;
|
|
- flexcan_write(FLEXCAN_IFLAG_DEFAULT &
|
|
+ priv->write(FLEXCAN_IFLAG_DEFAULT &
|
|
~FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, ®s->imask1);
|
|
- flexcan_write(priv->reg_ctrl_default & ~FLEXCAN_CTRL_ERR_ALL,
|
|
+ priv->write(priv->reg_ctrl_default & ~FLEXCAN_CTRL_ERR_ALL,
|
|
®s->ctrl);
|
|
napi_schedule(&priv->napi);
|
|
}
|
|
|
|
/* FIFO overflow */
|
|
if (reg_iflag1 & FLEXCAN_IFLAG_RX_FIFO_OVERFLOW) {
|
|
- flexcan_write(FLEXCAN_IFLAG_RX_FIFO_OVERFLOW, ®s->iflag1);
|
|
+ priv->write(FLEXCAN_IFLAG_RX_FIFO_OVERFLOW, ®s->iflag1);
|
|
dev->stats.rx_over_errors++;
|
|
dev->stats.rx_errors++;
|
|
}
|
|
@@ -760,9 +775,9 @@ static irqreturn_t flexcan_irq(int irq,
|
|
can_led_event(dev, CAN_LED_EVENT_TX);
|
|
|
|
/* after sending a RTR frame MB is in RX mode */
|
|
- flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
|
|
+ priv->write(FLEXCAN_MB_CODE_TX_INACTIVE,
|
|
®s->mb[FLEXCAN_TX_BUF_ID].can_ctrl);
|
|
- flexcan_write((1 << FLEXCAN_TX_BUF_ID), ®s->iflag1);
|
|
+ priv->write((1 << FLEXCAN_TX_BUF_ID), ®s->iflag1);
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
@@ -776,7 +791,7 @@ static void flexcan_set_bittiming(struct
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
u32 reg;
|
|
|
|
- reg = flexcan_read(®s->ctrl);
|
|
+ reg = priv->read(®s->ctrl);
|
|
reg &= ~(FLEXCAN_CTRL_PRESDIV(0xff) |
|
|
FLEXCAN_CTRL_RJW(0x3) |
|
|
FLEXCAN_CTRL_PSEG1(0x7) |
|
|
@@ -800,11 +815,11 @@ static void flexcan_set_bittiming(struct
|
|
reg |= FLEXCAN_CTRL_SMP;
|
|
|
|
netdev_dbg(dev, "writing ctrl=0x%08x\n", reg);
|
|
- flexcan_write(reg, ®s->ctrl);
|
|
+ priv->write(reg, ®s->ctrl);
|
|
|
|
/* print chip status */
|
|
netdev_dbg(dev, "%s: mcr=0x%08x ctrl=0x%08x\n", __func__,
|
|
- flexcan_read(®s->mcr), flexcan_read(®s->ctrl));
|
|
+ priv->read(®s->mcr), priv->read(®s->ctrl));
|
|
}
|
|
|
|
/* flexcan_chip_start
|
|
@@ -842,13 +857,13 @@ static int flexcan_chip_start(struct net
|
|
* choose format C
|
|
* set max mailbox number
|
|
*/
|
|
- reg_mcr = flexcan_read(®s->mcr);
|
|
+ reg_mcr = priv->read(®s->mcr);
|
|
reg_mcr &= ~FLEXCAN_MCR_MAXMB(0xff);
|
|
reg_mcr |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_FEN | FLEXCAN_MCR_HALT |
|
|
FLEXCAN_MCR_SUPV | FLEXCAN_MCR_WRN_EN | FLEXCAN_MCR_SRX_DIS |
|
|
FLEXCAN_MCR_IDAM_C | FLEXCAN_MCR_MAXMB(FLEXCAN_TX_BUF_ID);
|
|
netdev_dbg(dev, "%s: writing mcr=0x%08x", __func__, reg_mcr);
|
|
- flexcan_write(reg_mcr, ®s->mcr);
|
|
+ priv->write(reg_mcr, ®s->mcr);
|
|
|
|
/* CTRL
|
|
*
|
|
@@ -861,7 +876,7 @@ static int flexcan_chip_start(struct net
|
|
* enable bus off interrupt
|
|
* (== FLEXCAN_CTRL_ERR_STATE)
|
|
*/
|
|
- reg_ctrl = flexcan_read(®s->ctrl);
|
|
+ reg_ctrl = priv->read(®s->ctrl);
|
|
reg_ctrl &= ~FLEXCAN_CTRL_TSYN;
|
|
reg_ctrl |= FLEXCAN_CTRL_BOFF_REC | FLEXCAN_CTRL_LBUF |
|
|
FLEXCAN_CTRL_ERR_STATE;
|
|
@@ -881,29 +896,29 @@ static int flexcan_chip_start(struct net
|
|
/* leave interrupts disabled for now */
|
|
reg_ctrl &= ~FLEXCAN_CTRL_ERR_ALL;
|
|
netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl);
|
|
- flexcan_write(reg_ctrl, ®s->ctrl);
|
|
+ priv->write(reg_ctrl, ®s->ctrl);
|
|
|
|
/* clear and invalidate all mailboxes first */
|
|
for (i = FLEXCAN_TX_BUF_ID; i < ARRAY_SIZE(regs->mb); i++) {
|
|
- flexcan_write(FLEXCAN_MB_CODE_RX_INACTIVE,
|
|
+ priv->write(FLEXCAN_MB_CODE_RX_INACTIVE,
|
|
®s->mb[i].can_ctrl);
|
|
}
|
|
|
|
/* Errata ERR005829: mark first TX mailbox as INACTIVE */
|
|
- flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
|
|
+ priv->write(FLEXCAN_MB_CODE_TX_INACTIVE,
|
|
®s->mb[FLEXCAN_TX_BUF_RESERVED].can_ctrl);
|
|
|
|
/* mark TX mailbox as INACTIVE */
|
|
- flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
|
|
+ priv->write(FLEXCAN_MB_CODE_TX_INACTIVE,
|
|
®s->mb[FLEXCAN_TX_BUF_ID].can_ctrl);
|
|
|
|
/* acceptance mask/acceptance code (accept everything) */
|
|
- flexcan_write(0x0, ®s->rxgmask);
|
|
- flexcan_write(0x0, ®s->rx14mask);
|
|
- flexcan_write(0x0, ®s->rx15mask);
|
|
+ priv->write(0x0, ®s->rxgmask);
|
|
+ priv->write(0x0, ®s->rx14mask);
|
|
+ priv->write(0x0, ®s->rx15mask);
|
|
|
|
if (priv->devtype_data->quirks & FLEXCAN_QUIRK_DISABLE_RXFG)
|
|
- flexcan_write(0x0, ®s->rxfgmask);
|
|
+ priv->write(0x0, ®s->rxfgmask);
|
|
|
|
/* On Vybrid, disable memory error detection interrupts
|
|
* and freeze mode.
|
|
@@ -916,16 +931,16 @@ static int flexcan_chip_start(struct net
|
|
* and Correction of Memory Errors" to write to
|
|
* MECR register
|
|
*/
|
|
- reg_ctrl2 = flexcan_read(®s->ctrl2);
|
|
+ reg_ctrl2 = priv->read(®s->ctrl2);
|
|
reg_ctrl2 |= FLEXCAN_CTRL2_ECRWRE;
|
|
- flexcan_write(reg_ctrl2, ®s->ctrl2);
|
|
+ priv->write(reg_ctrl2, ®s->ctrl2);
|
|
|
|
- reg_mecr = flexcan_read(®s->mecr);
|
|
+ reg_mecr = priv->read(®s->mecr);
|
|
reg_mecr &= ~FLEXCAN_MECR_ECRWRDIS;
|
|
- flexcan_write(reg_mecr, ®s->mecr);
|
|
+ priv->write(reg_mecr, ®s->mecr);
|
|
reg_mecr &= ~(FLEXCAN_MECR_NCEFAFRZ | FLEXCAN_MECR_HANCEI_MSK |
|
|
FLEXCAN_MECR_FANCEI_MSK);
|
|
- flexcan_write(reg_mecr, ®s->mecr);
|
|
+ priv->write(reg_mecr, ®s->mecr);
|
|
}
|
|
|
|
err = flexcan_transceiver_enable(priv);
|
|
@@ -941,13 +956,13 @@ static int flexcan_chip_start(struct net
|
|
|
|
/* enable interrupts atomically */
|
|
disable_irq(dev->irq);
|
|
- flexcan_write(priv->reg_ctrl_default, ®s->ctrl);
|
|
- flexcan_write(FLEXCAN_IFLAG_DEFAULT, ®s->imask1);
|
|
+ priv->write(priv->reg_ctrl_default, ®s->ctrl);
|
|
+ priv->write(FLEXCAN_IFLAG_DEFAULT, ®s->imask1);
|
|
enable_irq(dev->irq);
|
|
|
|
/* print chip status */
|
|
netdev_dbg(dev, "%s: reading mcr=0x%08x ctrl=0x%08x\n", __func__,
|
|
- flexcan_read(®s->mcr), flexcan_read(®s->ctrl));
|
|
+ priv->read(®s->mcr), priv->read(®s->ctrl));
|
|
|
|
return 0;
|
|
|
|
@@ -972,8 +987,8 @@ static void flexcan_chip_stop(struct net
|
|
flexcan_chip_disable(priv);
|
|
|
|
/* Disable all interrupts */
|
|
- flexcan_write(0, ®s->imask1);
|
|
- flexcan_write(priv->reg_ctrl_default & ~FLEXCAN_CTRL_ERR_ALL,
|
|
+ priv->write(0, ®s->imask1);
|
|
+ priv->write(priv->reg_ctrl_default & ~FLEXCAN_CTRL_ERR_ALL,
|
|
®s->ctrl);
|
|
|
|
flexcan_transceiver_disable(priv);
|
|
@@ -1089,25 +1104,25 @@ static int register_flexcandev(struct ne
|
|
err = flexcan_chip_disable(priv);
|
|
if (err)
|
|
goto out_disable_per;
|
|
- reg = flexcan_read(®s->ctrl);
|
|
+ reg = priv->read(®s->ctrl);
|
|
reg |= FLEXCAN_CTRL_CLK_SRC;
|
|
- flexcan_write(reg, ®s->ctrl);
|
|
+ priv->write(reg, ®s->ctrl);
|
|
|
|
err = flexcan_chip_enable(priv);
|
|
if (err)
|
|
goto out_chip_disable;
|
|
|
|
/* set freeze, halt and activate FIFO, restrict register access */
|
|
- reg = flexcan_read(®s->mcr);
|
|
+ reg = priv->read(®s->mcr);
|
|
reg |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT |
|
|
FLEXCAN_MCR_FEN | FLEXCAN_MCR_SUPV;
|
|
- flexcan_write(reg, ®s->mcr);
|
|
+ priv->write(reg, ®s->mcr);
|
|
|
|
/* Currently we only support newer versions of this core
|
|
* featuring a RX FIFO. Older cores found on some Coldfire
|
|
* derivates are not yet supported.
|
|
*/
|
|
- reg = flexcan_read(®s->mcr);
|
|
+ reg = priv->read(®s->mcr);
|
|
if (!(reg & FLEXCAN_MCR_FEN)) {
|
|
netdev_err(dev, "Could not enable RX FIFO, unsupported core\n");
|
|
err = -ENODEV;
|
|
@@ -1135,8 +1150,12 @@ static void unregister_flexcandev(struct
|
|
static const struct of_device_id flexcan_of_match[] = {
|
|
{ .compatible = "fsl,imx6q-flexcan", .data = &fsl_imx6q_devtype_data, },
|
|
{ .compatible = "fsl,imx28-flexcan", .data = &fsl_imx28_devtype_data, },
|
|
+ { .compatible = "fsl,imx53-flexcan", .data = &fsl_p1010_devtype_data, },
|
|
+ { .compatible = "fsl,imx35-flexcan", .data = &fsl_p1010_devtype_data, },
|
|
+ { .compatible = "fsl,imx25-flexcan", .data = &fsl_p1010_devtype_data, },
|
|
{ .compatible = "fsl,p1010-flexcan", .data = &fsl_p1010_devtype_data, },
|
|
{ .compatible = "fsl,vf610-flexcan", .data = &fsl_vf610_devtype_data, },
|
|
+ { .compatible = "fsl,ls1021ar2-flexcan", .data = &fsl_ls1021a_r2_devtype_data, },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, flexcan_of_match);
|
|
@@ -1213,6 +1232,21 @@ static int flexcan_probe(struct platform
|
|
dev->flags |= IFF_ECHO;
|
|
|
|
priv = netdev_priv(dev);
|
|
+
|
|
+ if (of_property_read_bool(pdev->dev.of_node, "big-endian")) {
|
|
+ priv->read = flexcan_read_be;
|
|
+ priv->write = flexcan_write_be;
|
|
+ } else {
|
|
+ if (of_device_is_compatible(pdev->dev.of_node,
|
|
+ "fsl,p1010-flexcan")) {
|
|
+ priv->read = flexcan_read_be;
|
|
+ priv->write = flexcan_write_be;
|
|
+ } else {
|
|
+ priv->read = flexcan_read_le;
|
|
+ priv->write = flexcan_write_le;
|
|
+ }
|
|
+ }
|
|
+
|
|
priv->can.clock.freq = clock_freq;
|
|
priv->can.bittiming_const = &flexcan_bittiming_const;
|
|
priv->can.do_set_mode = flexcan_set_mode;
|