openwrt/target/linux/sunxi/patches-4.9/0039-pinctrl-sunxi-Make-sun...

123 lines
3.8 KiB
Diff

From 51814827190214986c452a166718bf12d32211c7 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Fri, 11 Nov 2016 17:50:36 +0800
Subject: pinctrl: sunxi: Make sunxi_pconf_group_set use sunxi_pconf_reg helper
The sunxi_pconf_reg helper introduced in the last patch gives us the
chance to rework sunxi_pconf_group_set to have it match the structure
of sunxi_pconf_(group_)get and make it easier to understand.
For each config to set, it:
1. checks if the parameter is supported.
2. checks if the argument is within limits.
3. converts argument to the register value.
4. writes to the register with spinlock held.
As a result the function now blocks unsupported config parameters,
instead of silently ignoring them.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 64 +++++++++++++++++------------------
1 file changed, 32 insertions(+), 32 deletions(-)
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -532,23 +532,27 @@ static int sunxi_pconf_group_set(struct
{
struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
struct sunxi_pinctrl_group *g = &pctl->groups[group];
- unsigned long flags;
unsigned pin = g->pin - pctl->desc->pin_base;
- u32 val, mask;
- u16 strength;
- u8 dlevel;
int i;
- spin_lock_irqsave(&pctl->lock, flags);
-
for (i = 0; i < num_configs; i++) {
- switch (pinconf_to_config_param(configs[i])) {
+ enum pin_config_param param;
+ unsigned long flags;
+ u32 offset, shift, mask, reg;
+ u16 arg, val;
+ int ret;
+
+ param = pinconf_to_config_param(configs[i]);
+ arg = pinconf_to_config_argument(configs[i]);
+
+ ret = sunxi_pconf_reg(pin, param, &offset, &shift, &mask);
+ if (ret < 0)
+ return ret;
+
+ switch (param) {
case PIN_CONFIG_DRIVE_STRENGTH:
- strength = pinconf_to_config_argument(configs[i]);
- if (strength > 40) {
- spin_unlock_irqrestore(&pctl->lock, flags);
+ if (arg < 10 || arg > 40)
return -EINVAL;
- }
/*
* We convert from mA to what the register expects:
* 0: 10mA
@@ -556,37 +560,33 @@ static int sunxi_pconf_group_set(struct
* 2: 30mA
* 3: 40mA
*/
- dlevel = strength / 10 - 1;
- val = readl(pctl->membase + sunxi_dlevel_reg(pin));
- mask = DLEVEL_PINS_MASK << sunxi_dlevel_offset(pin);
- writel((val & ~mask)
- | dlevel << sunxi_dlevel_offset(pin),
- pctl->membase + sunxi_dlevel_reg(pin));
+ val = arg / 10 - 1;
break;
case PIN_CONFIG_BIAS_DISABLE:
- val = readl(pctl->membase + sunxi_pull_reg(pin));
- mask = PULL_PINS_MASK << sunxi_pull_offset(pin);
- writel((val & ~mask),
- pctl->membase + sunxi_pull_reg(pin));
+ val = 0;
break;
case PIN_CONFIG_BIAS_PULL_UP:
- val = readl(pctl->membase + sunxi_pull_reg(pin));
- mask = PULL_PINS_MASK << sunxi_pull_offset(pin);
- writel((val & ~mask) | 1 << sunxi_pull_offset(pin),
- pctl->membase + sunxi_pull_reg(pin));
+ if (arg == 0)
+ return -EINVAL;
+ val = 1;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
- val = readl(pctl->membase + sunxi_pull_reg(pin));
- mask = PULL_PINS_MASK << sunxi_pull_offset(pin);
- writel((val & ~mask) | 2 << sunxi_pull_offset(pin),
- pctl->membase + sunxi_pull_reg(pin));
+ if (arg == 0)
+ return -EINVAL;
+ val = 2;
break;
default:
- break;
+ /* sunxi_pconf_reg should catch anything unsupported */
+ WARN_ON(1);
+ return -ENOTSUPP;
}
- } /* for each config */
- spin_unlock_irqrestore(&pctl->lock, flags);
+ spin_lock_irqsave(&pctl->lock, flags);
+ reg = readl(pctl->membase + offset);
+ reg &= ~(mask << shift);
+ writel(reg | val << shift, pctl->membase + offset);
+ spin_unlock_irqrestore(&pctl->lock, flags);
+ } /* for each config */
return 0;
}