openwrt/target/linux/ramips/dts/X5.dts

126 lines
2.0 KiB
Plaintext

/dts-v1/;
/include/ "rt5350.dtsi"
/ {
compatible = "X5", "ralink,rt5350-soc";
model = "Poray X5";
palmbus@10000000 {
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "gd25q64";
reg = <0 0>;
linux,modalias = "m25p80", "gd25q64";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
};
};
esw@10110000 {
ralink,portmap = <0x2f>;
ralink,led_polarity = <1>;
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "x5:green:power";
gpios = <&gpio0 13 1>;
};
20 {
label = "x5:green:20";
gpios = <&gpio0 12 1>;
};
50 {
label = "x5:green:50";
gpios = <&gpio0 11 1>;
};
80 {
label = "x5:green:80";
gpios = <&gpio0 7 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
bat {
label = "bat";
gpios = <&gpio0 9 1>;
linux,code = <0x211>;
};
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
mode {
label = "mode";
gpios = <&gpio0 14 1>;
linux,code = <0x100>;
linux,input-type = <5>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usb-mode {
gpio-export,name = "usb-mode";
gpio-export,output = <0>;
gpios = <&gpio0 18 0>;
};
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
ralink,led-polarity = <1>;
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
};