mirror of https://github.com/hak5/openwrt.git
629 lines
32 KiB
C
629 lines
32 KiB
C
/*****************************************************************************
|
|
** FILE NAME : ifxhcd.h
|
|
** PROJECT : IFX USB sub-system V3
|
|
** MODULES : IFX USB sub-system Host and Device driver
|
|
** SRC VERSION : 1.0
|
|
** DATE : 1/Jan/2009
|
|
** AUTHOR : Chen, Howard
|
|
** DESCRIPTION : This file contains the structures, constants, and interfaces for
|
|
** the Host Contoller Driver (HCD).
|
|
**
|
|
** The Host Controller Driver (HCD) is responsible for translating requests
|
|
** from the USB Driver into the appropriate actions on the IFXUSB controller.
|
|
** It isolates the USBD from the specifics of the controller by providing an
|
|
** API to the USBD.
|
|
** FUNCTIONS :
|
|
** COMPILER : gcc
|
|
** REFERENCE : Synopsys DWC-OTG Driver 2.7
|
|
** COPYRIGHT :
|
|
** Version Control Section **
|
|
** $Author$
|
|
** $Date$
|
|
** $Revisions$
|
|
** $Log$ Revision history
|
|
*****************************************************************************/
|
|
|
|
/*!
|
|
\defgroup IFXUSB_HCD HCD Interface
|
|
\ingroup IFXUSB_DRIVER_V3
|
|
\brief The Host Controller Driver (HCD) is responsible for translating requests
|
|
from the USB Driver into the appropriate actions on the IFXUSB controller.
|
|
It isolates the USBD from the specifics of the controller by providing an
|
|
API to the USBD.
|
|
*/
|
|
|
|
|
|
/*!
|
|
\file ifxhcd.h
|
|
\ingroup IFXUSB_DRIVER_V3
|
|
\brief This file contains the structures, constants, and interfaces for
|
|
the Host Contoller Driver (HCD).
|
|
*/
|
|
|
|
#if !defined(__IFXHCD_H__)
|
|
#define __IFXHCD_H__
|
|
|
|
#include <linux/list.h>
|
|
#include <linux/usb.h>
|
|
|
|
#ifdef __USE_TIMER_4_SOF__
|
|
#include <linux/hrtimer.h>
|
|
#endif
|
|
#include <linux/usb/hcd.h>
|
|
|
|
#include "ifxusb_cif.h"
|
|
#include "ifxusb_plat.h"
|
|
|
|
|
|
|
|
/*!
|
|
\addtogroup IFXUSB_HCD
|
|
*/
|
|
/*@{*/
|
|
|
|
/* Phases for control transfers.*/
|
|
typedef enum ifxhcd_control_phase {
|
|
IFXHCD_CONTROL_SETUP,
|
|
IFXHCD_CONTROL_DATA,
|
|
IFXHCD_CONTROL_STATUS
|
|
} ifxhcd_control_phase_e;
|
|
|
|
/* Reasons for halting a host channel. */
|
|
typedef enum ifxhcd_halt_status
|
|
{
|
|
HC_XFER_NO_HALT_STATUS, // Initial
|
|
HC_XFER_COMPLETE, // Xact complete without error, upward
|
|
HC_XFER_URB_COMPLETE, // Xfer complete without error, short upward
|
|
HC_XFER_STALL, // HC stopped abnormally, upward/downward
|
|
HC_XFER_XACT_ERR, // HC stopped abnormally, upward
|
|
HC_XFER_FRAME_OVERRUN, // HC stopped abnormally, upward
|
|
HC_XFER_BABBLE_ERR, // HC stopped abnormally, upward
|
|
HC_XFER_AHB_ERR, // HC stopped abnormally, upward
|
|
HC_XFER_DATA_TOGGLE_ERR,
|
|
HC_XFER_URB_DEQUEUE, // HC stopper manually, downward
|
|
HC_XFER_NAK // HC stopped by nak monitor, downward
|
|
} ifxhcd_halt_status_e;
|
|
|
|
struct ifxhcd_urbd;
|
|
struct ifxhcd_hc ;
|
|
struct ifxhcd_epqh ;
|
|
struct ifxhcd_hcd;
|
|
|
|
/*!
|
|
\brief A URB Descriptor (URBD) holds the state of a bulk, control,
|
|
interrupt, or isochronous transfer. A single URBD is created for each URB
|
|
(of one of these types) submitted to the HCD. The transfer associated with
|
|
a URBD may require one or multiple transactions.
|
|
|
|
A URBD is linked to a EP Queue Head, which is entered in either the
|
|
isoc, intr or non-periodic schedule for execution. When a URBD is chosen for
|
|
execution, some or all of its transactions may be executed. After
|
|
execution, the state of the URBD is updated. The URBD may be retired if all
|
|
its transactions are complete or if an error occurred. Otherwise, it
|
|
remains in the schedule so more transactions can be executed later.
|
|
*/
|
|
typedef struct ifxhcd_urbd {
|
|
struct list_head urbd_list_entry; // Hook for EPQH->urbd_list and ifxhcd->urbd_complete_list
|
|
struct urb *urb; /*!< URB for this transfer */
|
|
//struct urb {
|
|
// struct list_head urb_list;
|
|
// struct list_head anchor_list;
|
|
// struct usb_anchor * anchor;
|
|
// struct usb_device * dev;
|
|
// struct usb_host_endpoint * ep;
|
|
// unsigned int pipe;
|
|
// int status;
|
|
// unsigned int transfer_flags;
|
|
// void * transfer_buffer;
|
|
// dma_addr_t transfer_dma;
|
|
// u32 transfer_buffer_length;
|
|
// u32 actual_length;
|
|
// unsigned char * setup_packet;
|
|
// dma_addr_t setup_dma;
|
|
// int start_frame;
|
|
// int number_of_packets;
|
|
// int interval;
|
|
// int error_count;
|
|
// void * context;
|
|
// usb_complete_t complete;
|
|
// struct usb_iso_packet_descriptor iso_frame_desc[0];
|
|
//};
|
|
//urb_list For use by current owner of the URB.
|
|
//anchor_list membership in the list of an anchor
|
|
//anchor to anchor URBs to a common mooring
|
|
//dev Identifies the USB device to perform the request.
|
|
//ep Points to the endpoint's data structure. Will
|
|
// eventually replace pipe.
|
|
//pipe Holds endpoint number, direction, type, and more.
|
|
// Create these values with the eight macros available; u
|
|
// sb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is
|
|
// "ctrl", "bulk", "int" or "iso". For example
|
|
// usb_sndbulkpipe or usb_rcvintpipe. Endpoint numbers
|
|
// range from zero to fifteen. Note that "in" endpoint two
|
|
// is a different endpoint (and pipe) from "out" endpoint
|
|
// two. The current configuration controls the existence,
|
|
// type, and maximum packet size of any given endpoint.
|
|
//status This is read in non-iso completion functions to get
|
|
// the status of the particular request. ISO requests
|
|
// only use it to tell whether the URB was unlinked;
|
|
// detailed status for each frame is in the fields of
|
|
// the iso_frame-desc.
|
|
//transfer_flags A variety of flags may be used to affect how URB
|
|
// submission, unlinking, or operation are handled.
|
|
// Different kinds of URB can use different flags.
|
|
// URB_SHORT_NOT_OK
|
|
// URB_ISO_ASAP
|
|
// URB_NO_TRANSFER_DMA_MAP
|
|
// URB_NO_SETUP_DMA_MAP
|
|
// URB_NO_FSBR
|
|
// URB_ZERO_PACKET
|
|
// URB_NO_INTERRUPT
|
|
//transfer_buffer This identifies the buffer to (or from) which the I/O
|
|
// request will be performed (unless URB_NO_TRANSFER_DMA_MAP
|
|
// is set). This buffer must be suitable for DMA; allocate it
|
|
// with kmalloc or equivalent. For transfers to "in"
|
|
// endpoints, contents of this buffer will be modified. This
|
|
// buffer is used for the data stage of control transfers.
|
|
//transfer_dma When transfer_flags includes URB_NO_TRANSFER_DMA_MAP, the
|
|
// device driver is saying that it provided this DMA address,
|
|
// which the host controller driver should use in preference
|
|
// to the transfer_buffer.
|
|
//transfer_buffer_length How big is transfer_buffer. The transfer may be broken
|
|
// up into chunks according to the current maximum packet size
|
|
// for the endpoint, which is a function of the configuration
|
|
// and is encoded in the pipe. When the length is zero, neither
|
|
// transfer_buffer nor transfer_dma is used.
|
|
//actual_length This is read in non-iso completion functions, and it tells
|
|
// how many bytes (out of transfer_buffer_length) were transferred.
|
|
// It will normally be the same as requested, unless either an error
|
|
// was reported or a short read was performed. The URB_SHORT_NOT_OK
|
|
// transfer flag may be used to make such short reads be reported
|
|
// as errors.
|
|
//setup_packet Only used for control transfers, this points to eight bytes of
|
|
// setup data. Control transfers always start by sending this data
|
|
// to the device. Then transfer_buffer is read or written, if needed.
|
|
//setup_dma For control transfers with URB_NO_SETUP_DMA_MAP set, the device
|
|
// driver has provided this DMA address for the setup packet. The
|
|
// host controller driver should use this in preference to setup_packet.
|
|
//start_frame Returns the initial frame for isochronous transfers.
|
|
//number_of_packets Lists the number of ISO transfer buffers.
|
|
//interval Specifies the polling interval for interrupt or isochronous transfers.
|
|
// The units are frames (milliseconds) for for full and low speed devices,
|
|
// and microframes (1/8 millisecond) for highspeed ones.
|
|
//error_count Returns the number of ISO transfers that reported errors.
|
|
//context For use in completion functions. This normally points to request-specific
|
|
// driver context.
|
|
//complete Completion handler. This URB is passed as the parameter to the completion
|
|
// function. The completion function may then do what it likes with the URB,
|
|
// including resubmitting or freeing it.
|
|
//iso_frame_desc[0] Used to provide arrays of ISO transfer buffers and to collect the transfer
|
|
// status for each buffer.
|
|
|
|
struct ifxhcd_epqh *epqh;
|
|
// Actual data portion, not SETUP or STATUS in case of CTRL XFER
|
|
// DMA adjusted
|
|
uint8_t *setup_buff; /*!< Pointer to the entire transfer buffer. (CPU accessable)*/
|
|
uint8_t *xfer_buff; /*!< Pointer to the entire transfer buffer. (CPU accessable)*/
|
|
uint32_t xfer_len; /*!< Total number of bytes to transfer in this xfer. */
|
|
unsigned is_in :1;
|
|
unsigned is_active:1;
|
|
|
|
// For ALL XFER
|
|
uint8_t error_count; /*!< Holds the number of bus errors that have occurred for a transaction
|
|
within this transfer.
|
|
*/
|
|
/*== AVM/BC 20101111 Needed for URB Complete List ==*/
|
|
int status;
|
|
// For ISOC XFER only
|
|
#ifdef __EN_ISOC__
|
|
int isoc_frame_index; /*!< Index of the next frame descriptor for an isochronous transfer. A
|
|
frame descriptor describes the buffer position and length of the
|
|
data to be transferred in the next scheduled (micro)frame of an
|
|
isochronous transfer. It also holds status for that transaction.
|
|
The frame index starts at 0.
|
|
*/
|
|
// For SPLITed ISOC XFER only
|
|
uint8_t isoc_split_pos; /*!< Position of the ISOC split on full/low speed */
|
|
uint16_t isoc_split_offset;/*!< Position of the ISOC split in the buffer for the current frame */
|
|
#endif
|
|
} ifxhcd_urbd_t;
|
|
|
|
/*!
|
|
\brief A EP Queue Head (EPQH) holds the static characteristics of an endpoint and
|
|
maintains a list of transfers (URBDs) for that endpoint. A EPQH structure may
|
|
be entered in either the isoc, intr or non-periodic schedule.
|
|
*/
|
|
|
|
typedef struct ifxhcd_epqh {
|
|
struct list_head epqh_list_entry; // Hook for EP Queues
|
|
struct list_head urbd_list; /*!< List of URBDs for this EPQH. */
|
|
struct ifxhcd_hc *hc; /*!< Host channel currently processing transfers for this EPQH. */
|
|
struct ifxhcd_urbd *urbd; /*!< URBD currently assigned to a host channel for this EPQH. */
|
|
struct usb_host_endpoint *sysep;
|
|
uint8_t ep_type; /*!< Endpoint type. One of the following values:
|
|
- IFXUSB_EP_TYPE_CTRL
|
|
- IFXUSB_EP_TYPE_ISOC
|
|
- IFXUSB_EP_TYPE_BULK
|
|
- IFXUSB_EP_TYPE_INTR
|
|
*/
|
|
uint16_t mps; /*!< wMaxPacketSize Field of Endpoint Descriptor. */
|
|
|
|
/* == AVM/WK 20100710 Fix - Use toggle of usbcore ==*/
|
|
/*uint8_t data_toggle;*/ /*!< Determines the PID of the next data packet
|
|
One of the following values:
|
|
- IFXHCD_HC_PID_DATA0
|
|
- IFXHCD_HC_PID_DATA1
|
|
*/
|
|
uint8_t is_active;
|
|
|
|
uint8_t pkt_count_limit;
|
|
#ifdef __EPQD_DESTROY_TIMEOUT__
|
|
struct timer_list destroy_timer;
|
|
#endif
|
|
|
|
uint16_t wait_for_sof;
|
|
uint8_t need_split; /*!< Full/low speed endpoint on high-speed hub requires split. */
|
|
uint16_t interval; /*!< Interval between transfers in (micro)frames. (for INTR)*/
|
|
|
|
uint16_t period_counter; /*!< Interval between transfers in (micro)frames. */
|
|
uint8_t period_do;
|
|
|
|
uint8_t aligned_checked;
|
|
|
|
#if defined(__UNALIGNED_BUFFER_ADJ__)
|
|
uint8_t using_aligned_setup;
|
|
uint8_t *aligned_setup;
|
|
uint8_t using_aligned_buf;
|
|
uint8_t *aligned_buf;
|
|
unsigned aligned_buf_len : 19;
|
|
#endif
|
|
|
|
uint8_t *dump_buf;
|
|
} ifxhcd_epqh_t;
|
|
|
|
|
|
#if defined(__HC_XFER_TIMEOUT__)
|
|
struct ifxusb_core_if;
|
|
struct ifxhcd_hc;
|
|
typedef struct hc_xfer_info
|
|
{
|
|
struct ifxusb_core_if *core_if;
|
|
struct ifxhcd_hc *hc;
|
|
} hc_xfer_info_t;
|
|
#endif //defined(__HC_XFER_TIMEOUT__)
|
|
|
|
|
|
/*!
|
|
\brief Host channel descriptor. This structure represents the state of a single
|
|
host channel when acting in host mode. It contains the data items needed to
|
|
transfer packets to an endpoint via a host channel.
|
|
*/
|
|
typedef struct ifxhcd_hc
|
|
{
|
|
struct list_head hc_list_entry ; // Hook to free hc
|
|
struct ifxhcd_epqh *epqh ; /*!< EP Queue Head for the transfer being processed by this channel. */
|
|
|
|
uint8_t hc_num ; /*!< Host channel number used for register address lookup */
|
|
uint8_t *xfer_buff ; /*!< Pointer to the entire transfer buffer. */
|
|
uint32_t xfer_count ; /*!< Number of bytes transferred so far. The offset of the begin of the buf */
|
|
uint32_t xfer_len ; /*!< Total number of bytes to transfer in this xfer. */
|
|
uint16_t start_pkt_count ; /*!< Packet count at start of transfer. Used to calculate the actual xfer size*/
|
|
ifxhcd_halt_status_e halt_status; /*!< Reason for halting the host channel. */
|
|
|
|
unsigned dev_addr : 7; /*!< Device to access */
|
|
unsigned ep_num : 4; /*!< EP to access */
|
|
unsigned is_in : 1; /*!< EP direction. 0: OUT, 1: IN */
|
|
unsigned speed : 2; /*!< EP speed. */
|
|
unsigned ep_type : 2; /*!< Endpoint type. */
|
|
unsigned mps :11; /*!< Max packet size in bytes */
|
|
unsigned data_pid_start : 2; /*!< PID for initial transaction. */
|
|
unsigned do_ping : 1; /*!< Set to 1 to indicate that a PING request should be issued on this
|
|
channel. If 0, process normally.
|
|
*/
|
|
|
|
unsigned xfer_started : 1; /*!< Flag to indicate whether the transfer has been started. Set to 1 if
|
|
it has been started, 0 otherwise.
|
|
*/
|
|
unsigned halting : 1; /*!< Set to 1 if the host channel has been halted, but the core is not
|
|
finished flushing queued requests. Otherwise 0.
|
|
*/
|
|
unsigned short_rw : 1; /*!< When Tx, means termination needed.
|
|
When Rx, indicate Short Read */
|
|
/* Split settings for the host channel */
|
|
unsigned split : 2; /*!< Split: 0-Non Split, 1-SSPLIT, 2&3 CSPLIT */
|
|
|
|
/*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
|
|
unsigned nyet_count;
|
|
|
|
/* nak monitor */
|
|
unsigned nak_retry_r : 16;
|
|
unsigned nak_retry : 16;
|
|
#define nak_retry_max 40000
|
|
unsigned nak_countdown : 8;
|
|
unsigned nak_countdown_r: 8;
|
|
#define nak_countdown_max 1
|
|
|
|
uint16_t wait_for_sof;
|
|
ifxhcd_control_phase_e control_phase; /*!< Current phase for control transfers (Setup, Data, or Status). */
|
|
uint32_t ssplit_out_xfer_count; /*!< How many bytes transferred during SSPLIT OUT */
|
|
#ifdef __DEBUG__
|
|
uint32_t start_hcchar_val;
|
|
#endif
|
|
#ifdef __HC_XFER_TIMEOUT__
|
|
hc_xfer_info_t hc_xfer_info;
|
|
struct timer_list hc_xfer_timer;
|
|
#endif
|
|
uint32_t hcchar;
|
|
|
|
/* Split settings for the host channel */
|
|
uint8_t hub_addr; /*!< Address of high speed hub */
|
|
uint8_t port_addr; /*!< Port of the low/full speed device */
|
|
#ifdef __EN_ISOC__
|
|
uint8_t isoc_xact_pos; /*!< Split transaction position */
|
|
#endif
|
|
} ifxhcd_hc_t;
|
|
|
|
|
|
/*!
|
|
\brief This structure holds the state of the HCD, including the non-periodic and
|
|
periodic schedules.
|
|
*/
|
|
typedef struct ifxhcd_hcd
|
|
{
|
|
struct device *dev;
|
|
struct hc_driver hc_driver;
|
|
ifxusb_core_if_t core_if; /*!< Pointer to the core interface structure. */
|
|
struct usb_hcd *syshcd;
|
|
|
|
volatile union ifxhcd_internal_flags
|
|
{
|
|
uint32_t d32;
|
|
struct
|
|
{
|
|
unsigned port_connect_status_change : 1;
|
|
unsigned port_connect_status : 1;
|
|
unsigned port_reset_change : 1;
|
|
unsigned port_enable_change : 1;
|
|
unsigned port_suspend_change : 1;
|
|
unsigned port_over_current_change : 1;
|
|
unsigned reserved : 27;
|
|
} b;
|
|
} flags; /*!< Internal HCD Flags */
|
|
|
|
struct ifxhcd_hc ifxhc[MAX_EPS_CHANNELS]; /*!< Array of pointers to the host channel descriptors. Allows accessing
|
|
a host channel descriptor given the host channel number. This is
|
|
useful in interrupt handlers.
|
|
*/
|
|
struct list_head free_hc_list; /*!< Free host channels in the controller. This is a list of ifxhcd_hc_t items. */
|
|
uint8_t *status_buf; /*!< Buffer to use for any data received during the status phase of a
|
|
control transfer. Normally no data is transferred during the status
|
|
phase. This buffer is used as a bit bucket.
|
|
*/
|
|
#define IFXHCD_STATUS_BUF_SIZE 64
|
|
|
|
struct list_head epqh_np_active; // with URBD, with HC
|
|
struct list_head epqh_np_ready; // with URBD, No HC
|
|
|
|
struct list_head epqh_intr_active; // with URBD, with HC
|
|
struct list_head epqh_intr_ready; // with URBD, no pass, No HC
|
|
|
|
#ifdef __EN_ISOC__
|
|
struct list_head epqh_isoc_active; // with URBD, with HC
|
|
struct list_head epqh_isoc_ready; // with URBD, no pass, No HC
|
|
#endif
|
|
|
|
/*== AVM/BC 20101111 URB Complete List ==*/
|
|
struct list_head urbd_complete_list;
|
|
|
|
struct list_head epqh_stdby;
|
|
|
|
/* AVM/BC 20101111 flags removed */
|
|
//unsigned process_channels_in_use : 1;
|
|
//unsigned select_eps_in_use : 1;
|
|
|
|
struct tasklet_struct select_eps; /*!< Tasket to do a reset */
|
|
uint32_t lastframe;
|
|
spinlock_t lock;
|
|
#ifdef __USE_TIMER_4_SOF__
|
|
struct hrtimer hr_timer;
|
|
#endif
|
|
} ifxhcd_hcd_t;
|
|
|
|
/* Gets the ifxhcd_hcd from a struct usb_hcd */
|
|
static inline ifxhcd_hcd_t *syshcd_to_ifxhcd(struct usb_hcd *syshcd)
|
|
{
|
|
return (ifxhcd_hcd_t *)(syshcd->hcd_priv[0]);
|
|
}
|
|
|
|
/* Gets the struct usb_hcd that contains a ifxhcd_hcd_t. */
|
|
static inline struct usb_hcd *ifxhcd_to_syshcd(ifxhcd_hcd_t *ifxhcd)
|
|
{
|
|
return (struct usb_hcd *)(ifxhcd->syshcd);
|
|
}
|
|
|
|
/*! \brief HCD Create/Destroy Functions */
|
|
/*@{*/
|
|
extern int ifxhcd_init (ifxhcd_hcd_t *_ifxhcd);
|
|
extern void ifxhcd_remove(ifxhcd_hcd_t *_ifxhcd);
|
|
/*@}*/
|
|
|
|
/*! \brief Linux HC Driver API Functions */
|
|
/*@{*/
|
|
extern int ifxhcd_start(struct usb_hcd *hcd);
|
|
extern void ifxhcd_stop (struct usb_hcd *hcd);
|
|
extern int ifxhcd_get_frame_number(struct usb_hcd *hcd);
|
|
|
|
|
|
/*!
|
|
\brief This function does the setup for a data transfer for a host channel and
|
|
starts the transfer. May be called in either Slave mode or DMA mode. In
|
|
Slave mode, the caller must ensure that there is sufficient space in the
|
|
request queue and Tx Data FIFO.
|
|
|
|
For an OUT transfer in Slave mode, it loads a data packet into the
|
|
appropriate FIFO. If necessary, additional data packets will be loaded in
|
|
the Host ISR.
|
|
|
|
For an IN transfer in Slave mode, a data packet is requested. The data
|
|
packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
|
|
additional data packets are requested in the Host ISR.
|
|
|
|
For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
|
|
register along with a packet count of 1 and the channel is enabled. This
|
|
causes a single PING transaction to occur. Other fields in HCTSIZ are
|
|
simply set to 0 since no data transfer occurs in this case.
|
|
|
|
For a PING transfer in DMA mode, the HCTSIZ register is initialized with
|
|
all the information required to perform the subsequent data transfer. In
|
|
addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
|
|
controller performs the entire PING protocol, then starts the data
|
|
transfer.
|
|
|
|
@param _ifxhc Information needed to initialize the host channel. The xfer_len
|
|
value may be reduced to accommodate the max widths of the XferSize and
|
|
PktCnt fields in the HCTSIZn register. The multi_count value may be changed
|
|
to reflect the final xfer_len value.
|
|
*/
|
|
extern void ifxhcd_hc_start(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc);
|
|
|
|
//extern int ifxhcd_urb_enqueue(struct usb_hcd *_syshcd, struct usb_host_endpoint *_sysep, struct urb *_urb, gfp_t mem_flags);
|
|
//extern int ifxhcd_urb_dequeue(struct usb_hcd *_syshcd, struct urb *_urb);
|
|
extern irqreturn_t ifxhcd_irq(struct usb_hcd *_syshcd);
|
|
int ifxhcd_urb_enqueue( struct usb_hcd *_syshcd,
|
|
/*--- struct usb_host_endpoint *_sysep, Parameter im 2.6.28 entfallen ---*/
|
|
struct urb *_urb,
|
|
gfp_t _mem_flags);
|
|
int ifxhcd_urb_dequeue( struct usb_hcd *_syshcd,
|
|
struct urb *_urb, int status /* Parameter neu in 2.6.28 */);
|
|
|
|
extern void ifxhcd_endpoint_disable(struct usb_hcd *_syshcd, struct usb_host_endpoint *_sysep);
|
|
|
|
extern int ifxhcd_hub_status_data(struct usb_hcd *_syshcd, char *_buf);
|
|
extern int ifxhcd_hub_control( struct usb_hcd *_syshcd,
|
|
u16 _typeReq,
|
|
u16 _wValue,
|
|
u16 _wIndex,
|
|
char *_buf,
|
|
u16 _wLength);
|
|
|
|
/*@}*/
|
|
|
|
/*! \brief Transaction Execution Functions */
|
|
/*@{*/
|
|
extern void ifxhcd_complete_urb (ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status);
|
|
|
|
/*@}*/
|
|
|
|
/*! \brief Deferred Transaction Execution Functions */
|
|
/*@{*/
|
|
|
|
/*== AVM/BC 20101111 URB Complete List ==*/
|
|
extern void defer_ifxhcd_complete_urb (ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status);
|
|
|
|
/*!
|
|
\brief Clears the transfer state for a host channel. This function is normally
|
|
called after a transfer is done and the host channel is being released.
|
|
*/
|
|
extern void ifxhcd_hc_cleanup(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc);
|
|
|
|
/*!
|
|
\brief Attempts to halt a host channel. This function should only be called in
|
|
Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
|
|
normal circumstances in DMA mode, the controller halts the channel when the
|
|
transfer is complete or a condition occurs that requires application
|
|
intervention.
|
|
|
|
In slave mode, checks for a free request queue entry, then sets the Channel
|
|
Enable and Channel Disable bits of the Host Channel Characteristics
|
|
register of the specified channel to intiate the halt. If there is no free
|
|
request queue entry, sets only the Channel Disable bit of the HCCHARn
|
|
register to flush requests for this channel. In the latter case, sets a
|
|
flag to indicate that the host channel needs to be halted when a request
|
|
queue slot is open.
|
|
|
|
In DMA mode, always sets the Channel Enable and Channel Disable bits of the
|
|
HCCHARn register. The controller ensures there is space in the request
|
|
queue before submitting the halt request.
|
|
|
|
Some time may elapse before the core flushes any posted requests for this
|
|
host channel and halts. The Channel Halted interrupt handler completes the
|
|
deactivation of the host channel.
|
|
*/
|
|
extern void ifxhcd_hc_halt(ifxusb_core_if_t *_core_if,
|
|
ifxhcd_hc_t *_ifxhc,
|
|
ifxhcd_halt_status_e _halt_status);
|
|
|
|
/*!
|
|
\brief Prepares a host channel for transferring packets to/from a specific
|
|
endpoint. The HCCHARn register is set up with the characteristics specified
|
|
in _ifxhc. Host channel interrupts that may need to be serviced while this
|
|
transfer is in progress are enabled.
|
|
*/
|
|
extern void ifxhcd_hc_init(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc);
|
|
|
|
/*!
|
|
\brief This function is called to handle the disconnection of host port.
|
|
*/
|
|
int32_t ifxhcd_disconnect(ifxhcd_hcd_t *_ifxhcd);
|
|
/*@}*/
|
|
|
|
/*! \brief Interrupt Handler Functions */
|
|
/*@{*/
|
|
extern irqreturn_t ifxhcd_oc_irq(int _irq, void *_dev);
|
|
|
|
extern int32_t ifxhcd_handle_oc_intr(ifxhcd_hcd_t *_ifxhcd);
|
|
extern int32_t ifxhcd_handle_intr (ifxhcd_hcd_t *_ifxhcd);
|
|
/*@}*/
|
|
|
|
|
|
/*! \brief Schedule Queue Functions */
|
|
/*@{*/
|
|
extern ifxhcd_epqh_t *ifxhcd_epqh_create (ifxhcd_hcd_t *_ifxhcd, struct urb *_urb);
|
|
extern void ifxhcd_epqh_free ( ifxhcd_epqh_t *_epqh);
|
|
extern void select_eps (ifxhcd_hcd_t *_ifxhcd);
|
|
extern void process_channels(ifxhcd_hcd_t *_ifxhcd);
|
|
extern void process_channels_sub(ifxhcd_hcd_t *_ifxhcd);
|
|
extern void complete_channel(ifxhcd_hcd_t *_ifxhcd, ifxhcd_hc_t *_ifxhc, ifxhcd_urbd_t *_urbd);
|
|
extern void ifxhcd_epqh_ready(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
|
|
extern void ifxhcd_epqh_active(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
|
|
extern void ifxhcd_epqh_idle(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
|
|
extern void ifxhcd_epqh_idle_periodic(ifxhcd_epqh_t *_epqh);
|
|
extern int ifxhcd_urbd_create (ifxhcd_hcd_t *_ifxhcd,struct urb *_urb);
|
|
/*@}*/
|
|
|
|
/*! \brief Gets the usb_host_endpoint associated with an URB. */
|
|
static inline struct usb_host_endpoint *ifxhcd_urb_to_endpoint(struct urb *_urb)
|
|
{
|
|
struct usb_device *dev = _urb->dev;
|
|
int ep_num = usb_pipeendpoint(_urb->pipe);
|
|
|
|
return (usb_pipein(_urb->pipe))?(dev->ep_in[ep_num]):(dev->ep_out[ep_num]);
|
|
}
|
|
|
|
/*!
|
|
* \brief Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
|
|
* qualified with its direction (possible 32 endpoints per device).
|
|
*/
|
|
#define ifxhcd_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
|
|
((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
|
|
|
|
|
|
/* AVM/WK: not needed?
|
|
|
|
extern struct usb_device *usb_alloc_dev (struct usb_device *parent, struct usb_bus *, unsigned port);
|
|
extern int usb_add_hcd (struct usb_hcd *syshcd, unsigned int irqnum, unsigned long irqflags);
|
|
extern void usb_remove_hcd (struct usb_hcd *syshcd);
|
|
extern struct usb_hcd *usb_create_hcd (const struct hc_driver *driver, struct device *dev, char *bus_name);
|
|
extern void usb_hcd_giveback_urb (struct usb_hcd *syshcd, struct urb *urb);
|
|
extern void usb_put_hcd (struct usb_hcd *syshcd);
|
|
extern long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount);
|
|
|
|
*/
|
|
/** Internal Functions */
|
|
void ifxhcd_dump_state(ifxhcd_hcd_t *_ifxhcd);
|
|
extern char *syserr(int errno);
|
|
|
|
/*@}*//*IFXUSB_HCD*/
|
|
|
|
#endif // __IFXHCD_H__
|