openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Florian Fainelli 6e65f0080d also use openwrt-specific lzma options in gen_initramfs_list.sh SVN-Revision: 17080		2009-08-01 16:44:16 +00:00
docs	configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450 )	2009-07-05 11:17:49 +00:00
include	revert 17050 this was not the right way to fix this	2009-08-01 12:10:22 +00:00
package	force iptables to be configured with ipv6 enabled (#5586 )	2009-08-01 12:10:59 +00:00
scripts	Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	2009-06-08 21:17:58 +00:00
target	also use openwrt-specific lzma options in gen_initramfs_list.sh	2009-08-01 16:44:16 +00:00
toolchain	disable warnings as error in the gdb configuration (#5602 )	2009-07-31 14:24:38 +00:00
tools	revert r17022, this is not the way to do this	2009-07-26 18:13:03 +00:00
.gitignore	add logs/ to .gitignore	2009-04-24 01:04:57 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	globally define IPv6 support or not in OpenWrt, just like for largefiles, ipv6 disabled by default (#4857 )	2009-07-25 21:45:51 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	2009-05-28 18:40:37 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
feeds.conf.default	switch to LuCI 0.9.x branch	2009-06-10 23:55:19 +00:00
rules.mk	do not set anything in DISABLE_IPV6 when set, let the package pick up the defaults	2009-08-01 12:12:48 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org