Sungbo Eo b7ec6659a1 ramips: add support for ipTIME A3 ... ipTIME A3 is a 2.4/5GHz band AC1200 router, based on MediaTek MT7628AN. Specifications: - SoC: MT7628AN - RAM: DDR2 64MB - Flash: SPI NOR 8MB - WiFi: - 2.4GHz: SoC internal - 5GHz: MT7612EN - Ethernet: 3x 10/100Mbps - Switch: SoC internal - UART: - J1: 3.3V, TX, RX, GND (3.3V is the square pad) / 57600 8N1 Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Signed-off-by: Sungbo Eo <mans0n@gorani.run>		2019-09-25 14:44:36 +08:00
..
lzma-loader	ramips: Add support for mt7621 to lzma-loader	2018-06-21 06:54:42 +02:00
Makefile	ramips: add support for Fon FON2601	2019-07-26 08:09:16 +02:00
mt76x8.mk	ramips: add support for ipTIME A3	2019-09-25 14:44:36 +08:00
mt7620.mk	ramips: add support for EnGenius ESR600	2019-09-20 11:36:27 +02:00
mt7621.mk	ramips: add support for XiaoYu XY-C5	2019-09-25 14:44:36 +08:00
rt288x.mk	ramips: use kiB instead of B for IMAGE_SIZE	2019-07-25 14:31:34 +02:00
rt305x.mk	ramips: add device alias for Allnet ALL0239-3G	2019-08-22 13:22:39 +02:00
rt3883.mk	ramips: remove ralink_default_fw_size_xxx variables	2019-07-25 14:31:30 +02:00