| .. |
|
ar724x.dtsi
|
ath79: add pinmux node to ar724x.dtsi
|
2018-06-01 08:23:02 +02:00 |
|
ar934x.dtsi
|
ath79: fix dts warnings
|
2018-08-08 08:11:11 +02:00 |
|
ar1022_iodata_wn-ag300dgr.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar7100.dtsi
|
ath79: fix dtc compiler warnings
|
2018-12-12 12:28:26 +01:00 |
|
ar7161_buffalo_wzr-hp-ag300h.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar7161_dlink_dir-825-b1.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar7161_netgear_wndr3700.dts
|
ath79: specify "firmware" partition format for WNDR3700 and v2
|
2018-11-24 13:15:55 +01:00 |
|
ar7161_netgear_wndr3700.dtsi
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar7161_netgear_wndr3700v2.dts
|
ath79: specify "firmware" partition format for WNDR3700 and v2
|
2018-11-24 13:15:55 +01:00 |
|
ar7161_netgear_wndr3800.dts
|
ath79: specify "firmware" partition format for Netgear WNDR3800
|
2018-11-24 08:46:59 +01:00 |
|
ar7161_ubnt_routerstation-pro.dts
|
ath79: add syscon compatible property to ar7100 ethernet nodes
|
2018-09-06 21:35:53 +02:00 |
|
ar7161_ubnt_routerstation.dts
|
ath79: initial support for Ubiquiti RouterStation and RouterStation Pro
|
2018-08-27 19:31:17 +02:00 |
|
ar7161_ubnt_routerstation.dtsi
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar7240.dtsi
|
ath79: fix dts warnings
|
2018-08-08 08:11:11 +02:00 |
|
ar7240_buffalo_whr-g301n.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar7240_netgear_wnr612-v2.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar7240_netgear_wnr612-v2.dtsi
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar7240_on_n150r.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar7240_tplink_tl-wr74xn-v1.dtsi
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar7240_tplink_tl-wr740n-v1.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar7240_tplink_tl-wr740n-v3.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar7240_tplink_tl-wr741-v1.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar7240_tplink_tl-wr743nd-v1.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar7240_tplink_tl-wr841-v5.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar7240_tplink_tl-wr941-v4.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar7241.dtsi
|
ath79: fix dts warnings
|
2018-08-08 08:11:11 +02:00 |
|
ar7241_tplink.dtsi
|
ath79: Define firmware partition format to all boards where applicable
|
2018-12-06 13:28:22 +01:00 |
|
ar7241_tplink_tl-mr3x20.dtsi
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar7241_tplink_tl-mr3220-v1.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar7241_tplink_tl-mr3420-v1.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar7241_tplink_tl-wr841-v7.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar7241_tplink_tl-wr842n-v1.dts
|
ath79: add support for TP-Link TL-WR842N/ND v1 router
|
2018-12-15 21:35:45 +01:00 |
|
ar7241_ubnt_airrouter.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar7241_ubnt_bullet-m.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar7241_ubnt_nano-m.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar7241_ubnt_rocket-m.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar7241_ubnt_unifi.dts
|
ath79: Define firmware partition format to all boards where applicable
|
2018-12-06 13:28:22 +01:00 |
|
ar7241_ubnt_xm.dtsi
|
ath79: Define firmware partition format to all boards where applicable
|
2018-12-06 13:28:22 +01:00 |
|
ar7241_ubnt_xm_outdoor.dtsi
|
ath79: split ubnt outdoor device leds into separate dtsi
|
2018-12-03 07:58:49 +01:00 |
|
ar7242.dtsi
|
ath79: Add switch reset definition in dts
|
2018-07-30 10:43:35 +02:00 |
|
ar7242_avm_fritz300e.dts
|
ath79: add AVM EVA firmware partition compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar7242_buffalo_bhr-4grv.dts
|
ath79: fix MAC address for Buffalo BHR-4GRV
|
2018-10-07 10:46:20 +02:00 |
|
ar7242_buffalo_wzr-bhr.dtsi
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar7242_buffalo_wzr-hp-g302h-a1a0.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar7242_buffalo_wzr-hp-g450h.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar7242_tplink_tl-wr2543-v1.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar9132.dtsi
|
ath79: ag71xx: apply interface mode to MII0/1_CTRL on ar71xx/ar913x
|
2018-08-28 11:26:53 +02:00 |
|
ar9132_tplink_tl-wa901nd-v2.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar9132_tplink_tl-wr941-v2.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar9132_tplink_tl-wr1043nd-v1.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar9330.dtsi
|
ath79: fix dts warnings
|
2018-08-08 08:11:11 +02:00 |
|
ar9330_glinet_gl-ar150.dts
|
ath79: fix boardname of GL.iNet GL-AR150
|
2018-12-31 14:05:26 +01:00 |
|
ar9330_pqi_air-pen.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar9331.dtsi
|
ath79: add tl-mr3020-v1 support
|
2018-06-08 12:19:49 +02:00 |
|
ar9331_dptechnics_dpt-module.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar9331_dragino_ms14.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar9331_embeddedwireless_dorin.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar9331_etactica_eg200.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar9331_onion_omega.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar9331_pisen_wmm003n.dts
|
ath79: Define firmware partition format to all boards where applicable
|
2018-12-06 13:28:22 +01:00 |
|
ar9331_tplink_tl-mr10u.dts
|
ath79: rename dts/image using manufacturer_board scheme
|
2018-08-06 07:31:54 +02:00 |
|
ar9331_tplink_tl-mr3020-v1.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar9331_tplink_tl-mr3040-v2.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar9331_tplink_tl-wr703n.dts
|
ath79: rename dts/image using manufacturer_board scheme
|
2018-08-06 07:31:54 +02:00 |
|
ar9331_tplink_tl-wr703n_tl-mr10u.dtsi
|
ath79: Define firmware partition format to all boards where applicable
|
2018-12-06 13:28:22 +01:00 |
|
ar9331_tplink_tl-wr740nd-v4.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar9331_tplink_tl-wr741nd-v4.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar9331_tplink_tl-wr741nd-v4.dtsi
|
ath79: Fix system LED on TP-Link WR740/741 v4
|
2018-12-31 13:28:31 +01:00 |
|
ar9341.dtsi
|
ath79: ar934x: Update dts for current ag71xx driver
|
2018-07-30 10:43:33 +02:00 |
|
ar9341_pcs_cr3000.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar9341_tplink_tl-wr841-v8.dts
|
ath79: add support for TP-Link TL-WR841N/ND v8
|
2018-12-31 13:28:31 +01:00 |
|
ar9341_tplink_tl-wr842n-v2.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar9342_iodata_etg3-r.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar9342_ubnt_bullet-m-xw.dts
|
ath79: ubnt-bullet-m-xw: Remove eth1 disabled node
|
2018-12-27 16:02:25 +01:00 |
|
ar9342_ubnt_lap-120.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar9342_ubnt_nanostation-ac-loco.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar9342_ubnt_nanostation-ac.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar9342_ubnt_wa.dtsi
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar9342_ubnt_xw.dtsi
|
ath79: ubnt-bullet-m-xw: Move eth0 mtd-mac-address to the common include
|
2018-12-27 16:02:25 +01:00 |
|
ar9344.dtsi
|
ath79: fix dts warnings
|
2018-08-08 08:11:11 +02:00 |
|
ar9344_dlink_dir-8x5.dtsi
|
ath79: add d-link dir-825-c1 and dir-835-a1
|
2018-12-17 00:21:34 +01:00 |
|
ar9344_dlink_dir-825-c1.dts
|
ath79: add d-link dir-825-c1 and dir-835-a1
|
2018-12-17 00:21:34 +01:00 |
|
ar9344_dlink_dir-835-a1.dts
|
ath79: add d-link dir-825-c1 and dir-835-a1
|
2018-12-17 00:21:34 +01:00 |
|
ar9344_ocedo_raccoon.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar9344_pcs_cap324.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar9344_pcs_cr5000.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar9344_tplink_tl-wdr3600.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar9344_tplink_tl-wdr4300.dts
|
ath79: add SoC or family compatible
|
2018-12-06 13:28:22 +01:00 |
|
ar9344_tplink_tl-wdr4300.dtsi
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ar9344_wd_mynet-wifi-rangeextender.dts
|
ath79: add support for WD My Net Wi-Fi Range Extender
|
2018-09-10 09:07:41 +02:00 |
|
ar9344_winchannel_wb2000.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
ath79.dtsi
|
ath79: ar934x: Update dts for current ag71xx driver
|
2018-07-30 10:43:33 +02:00 |
|
qca953x.dtsi
|
ath79: rename qca9533.dtsi to qca953x.dtsi
|
2018-12-06 12:17:25 +01:00 |
|
qca953x_tplink_tl-wr810n.dtsi
|
ath79: Add support for TP-Link WR810N
|
2018-12-31 14:18:19 +01:00 |
|
qca956x.dtsi
|
ath79: fix pinmux reg value for QCA956x
|
2018-12-24 19:18:07 +01:00 |
|
qca9531_engenius_ews511ap.dts
|
ath79: add support for EnGenius EWS511AP
|
2018-12-31 16:25:09 +01:00 |
|
qca9531_glinet_gl-ar300m-nand.dts
|
ath79: fix boardname of GL.iNet GL-AR300M
|
2018-12-31 14:24:21 +01:00 |
|
qca9531_glinet_gl-ar300m-nor.dts
|
ath79: fix boardname of GL.iNet GL-AR300M
|
2018-12-31 14:24:21 +01:00 |
|
qca9531_glinet_gl-ar300m.dtsi
|
ath79: add status LED on GL.iNet AR300M
|
2018-12-31 14:24:55 +01:00 |
|
qca9531_glinet_gl-x750.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
qca9531_tplink_tl-wr810n-v1.dts
|
ath79: Add support for TP-Link WR810N
|
2018-12-31 14:18:19 +01:00 |
|
qca9533_comfast_cf-e110n-v2.dts
|
ath79: add support for COMFAST CF-E110N
|
2018-12-31 16:25:11 +01:00 |
|
qca9533_tplink_tl-wr810n-v2.dts
|
ath79: Add support for TP-Link WR810N
|
2018-12-31 14:18:19 +01:00 |
|
qca9533_tplink_tl-wr841-v9.dts
|
ath79: add support for indicating the boot state using multiple leds
|
2018-08-15 07:42:36 +02:00 |
|
qca9533_tplink_tl-wr841-v11.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
qca9533_tplink_tl-wr841.dtsi
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
qca9557.dtsi
|
ath79: fix pinmux reg size for QCA955x
|
2018-12-24 19:18:07 +01:00 |
|
qca9557_buffalo_bhr-4grv2.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
qca9557_iodata_wn-ac-dgr.dtsi
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
qca9557_iodata_wn-ac1167dgr.dts
|
ath79: add support for I-O DATA WN-AC1167DGR
|
2018-08-16 21:20:57 +02:00 |
|
qca9557_iodata_wn-ac1600dgr2.dts
|
ath79: add support for I-O DATA WN-AC1167DGR
|
2018-08-16 21:20:57 +02:00 |
|
qca9558_devolo_dvl1xxx.dtsi
|
ath79: add support for devolo WiFi pro 1200e
|
2018-12-27 14:06:38 +01:00 |
|
qca9558_devolo_dvl1200e.dts
|
ath79: add support for devolo WiFi pro 1200e
|
2018-12-27 14:06:38 +01:00 |
|
qca9558_devolo_dvl1750c.dts
|
ath79: add support for devolo WiFi pro 1750c
|
2018-12-27 14:06:38 +01:00 |
|
qca9558_ocedo_koala.dts
|
ath79: fix OCEDO Koala ethernet configuration
|
2018-12-30 20:08:13 +01:00 |
|
qca9558_openmesh_om5p-ac-v2.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
qca9558_tplink_archer-c7-v1.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
qca9558_tplink_archer-c7-v2.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
qca9558_tplink_archer-c7.dtsi
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
qca9558_tplink_tl-wdr4900-v2.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
qca9558_tplink_tl-wr1043nd-v2.dts
|
ath79: rename dts/image using manufacturer_board scheme
|
2018-08-06 07:31:54 +02:00 |
|
qca9558_tplink_tl-wr1043nd-v3.dts
|
ath79: rename dts/image using manufacturer_board scheme
|
2018-08-06 07:31:54 +02:00 |
|
qca9558_tplink_tl-wr1043nd.dtsi
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
qca9561_avm_fritz4020.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
qca9561_tplink_archer-c5x.dtsi
|
ath79: add support for Archer C58/C59 v1
|
2018-11-26 12:05:45 +01:00 |
|
qca9561_tplink_archer-c58-v1.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
qca9561_tplink_archer-c59-v1.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
qca9563_dlink_dir-859-a1.dts
|
ath79: add support for D-Link DIR-859 A1
|
2018-12-30 20:08:13 +01:00 |
|
qca9563_elecom_wrc-300ghbk2-i.dts
|
ath79: add support for ELECOM WRC-1750GHBK2-I/C
|
2018-12-31 21:38:53 +09:00 |
|
qca9563_elecom_wrc-1750ghbk2-i.dts
|
ath79: add support for ELECOM WRC-1750GHBK2-I/C
|
2018-12-31 21:38:53 +09:00 |
|
qca9563_elecom_wrc-ghbk2-i.dtsi
|
ath79: add support for ELECOM WRC-1750GHBK2-I/C
|
2018-12-31 21:38:53 +09:00 |
|
qca9563_glinet_gl-ar750s.dts
|
ath79: align GL-AR750S boardname to other GL.iNet devices
|
2019-01-01 19:42:41 +01:00 |
|
qca9563_nec_wg800hp.dts
|
ath79: add support for NEC Aterm WG800HP
|
2018-12-24 19:18:07 +01:00 |
|
qca9563_phicomm_k2t.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
qca9563_rosinson_wr818.dts
|
ath79: tweak the position of factory partition for wr818
|
2018-12-31 16:37:09 +01:00 |
|
qca9563_tplink_archer-a7-v5.dts
|
ath79: add support for TP-Link Archer A7
|
2018-12-17 08:09:13 +01:00 |
|
qca9563_tplink_archer-c6-v2.dts
|
ath79: add support for TP-Link Archer C6 v2
|
2018-12-31 16:25:11 +01:00 |
|
qca9563_tplink_archer-c7-v5.dts
|
ath79: add support for TP-Link Archer C7 v5
|
2018-12-27 14:06:38 +01:00 |
|
qca9563_tplink_archer-x6-v2.dtsi
|
ath79: add support for TP-Link Archer C6 v2
|
2018-12-31 16:25:11 +01:00 |
|
qca9563_tplink_archer-x7-v5.dtsi
|
ath79: dts: Remove newly added default-state=off property
|
2018-12-17 14:22:28 +01:00 |
|
qca9563_tplink_re450-v2.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
qca9563_tplink_tl-wr1043n.dtsi
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
qca9563_tplink_tl-wr1043nd-v4.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
2018-12-17 08:16:28 +01:00 |
|
qca9563_ubnt_unifiac-lite.dts
|
ath79: add support for Unifi AC Mesh
|
2018-06-28 20:31:48 +02:00 |
|
qca9563_ubnt_unifiac-lite.dtsi
|
ath79: add support for Unifi AC Mesh
|
2018-06-28 20:31:48 +02:00 |
|
qca9563_ubnt_unifiac-mesh-pro.dts
|
ath79: add support for UniFi AC-Mesh Pro
|
2018-07-07 21:07:40 +02:00 |
|
qca9563_ubnt_unifiac-mesh.dts
|
ath79: add support for Unifi AC Mesh
|
2018-06-28 20:31:48 +02:00 |
|
qca9563_ubnt_unifiac-pro.dts
|
ath79: add support for UniFi AC-Mesh Pro
|
2018-07-07 21:07:40 +02:00 |
|
qca9563_ubnt_unifiac-pro.dtsi
|
ath79: add support for UniFi AC-Mesh Pro
|
2018-07-07 21:07:40 +02:00 |
|
qca9563_ubnt_unifiac.dtsi
|
ath79: Fix UBNT Unifi AC LEDs
|
2018-12-31 13:28:31 +01:00 |
59b99e1924