This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org
 
 
 
 
 
 
Go to file
Felix Fietkau 6af8f1429d iproute2: Update to version 4.4
Update iproute2 to latest version 4.4 with full MPLS support.

Signed-off-by: André Valentin <avalentin@marcant.net>

SVN-Revision: 48612
2016-02-01 18:03:54 +00:00
config buildroot: add options to build the kernel for NFS boot 2016-02-01 01:06:39 +00:00
docs build: Prevent more gzip timestamps 2015-07-14 09:57:45 +00:00
include include: image.mk: use correct flag for fixed mtimes with make_ext4fs (#21768) 2016-02-01 13:58:43 +00:00
package iproute2: Update to version 4.4 2016-02-01 18:03:54 +00:00
scripts scripts/strip-kmod.sh: remove a few extra sections to slightly reduce kernel module size 2016-02-01 13:33:33 +00:00
target ramips: add IMAGE_SIZE to DEVICE_VARS, it is used by build templates 2016-02-01 17:41:29 +00:00
toolchain musl: fix an alignment issue that was breaking ldso on ARMv5 2016-01-31 00:55:05 +00:00
tools firmware-utils: add oseama tool for creating Seama entities 2016-02-01 12:42:00 +00:00
.gitattributes
.gitignore build: add integration for managing opkg package feed keys 2015-04-06 19:39:51 +00:00
BSDmakefile
Config.in scripts/config: sync with linux upstream 2015-01-08 14:33:53 +00:00
LICENSE
Makefile Makefile: set timezone to UTC 2016-01-28 22:42:18 +00:00
README Add 'subversion' build dependency to README 2014-08-31 12:06:32 +00:00
feeds.conf.default feeds.conf.default: add new targets feed 2015-03-19 11:58:35 +00:00
rules.mk build: filter out -fno-plt for the kernel build, fixes #21712 2016-01-28 00:26:38 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org