..
6in4
6in4: sync with HE.net endpoint update changes
2011-10-17 12:45:07 +00:00
6to4
6to4: set the tunnel remote endpoint to any, put the gateway in the route instead
2012-03-15 11:01:50 +00:00
acx
package: acx: mark as broken for 3.2
2011-11-09 21:16:45 +00:00
acx-mac80211
acx-mac80211: update to 20111030
2011-11-10 15:31:37 +00:00
admswconfig
admswconfig: reset interface after applying config
2011-01-27 21:49:50 +00:00
apex
only support EABI on ARM targets
2011-03-07 12:59:19 +00:00
ar7-atm
add support for 2.6.37, thanks Wipster!
2011-02-18 12:52:04 +00:00
arptables
artables ebtables iptables: Moved *tables to Firewall submenu of the Network package group because that's where all the feeds packages for firewalls now are.
2011-03-12 01:24:18 +00:00
avila-wdt
massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950
2010-07-12 14:06:13 +00:00
base-files
Add munin to /etc/services
2012-03-18 19:41:57 +00:00
base-files-network
base-files-network: configure vlan interface name type immediately before the vconfig add calls, fixes race condition ( #11127 )
2012-03-13 12:25:28 +00:00
block-mount
block-mount: do not auto-mount anonymous mtdblock devices ( fixes #10960 , #10850 )
2012-02-13 15:31:31 +00:00
bridge-utils
Update bridge-utils to the last upstream version 1.5.
2012-02-14 19:07:09 +00:00
broadcom-diag
broadcom-diag: add missing brackets breakign the detection logic ( #10836 )
2012-02-17 09:04:23 +00:00
broadcom-wl
broadcom-wl: remove an erroneous BUG() call in the glue driver
2012-02-24 13:36:46 +00:00
busybox
busybox 1.19.4 update patch
2012-03-18 19:46:52 +00:00
button-hotplug
button-hotplug: add autoload feature
2011-08-15 14:11:49 +00:00
comgt
comgt: Add scripts to comgt to retrieve the IMSI and CNUM to identify the SIM card.
2011-11-30 14:16:44 +00:00
compcache
compcache does not build on 2.6.38+
2011-06-04 13:35:48 +00:00
crda
crda: remove unnecessary build dependency on mac80211
2012-02-17 15:54:57 +00:00
cyassl
cyassl: use patch-libtool pkg fixup
2012-01-08 15:39:42 +00:00
dnsmasq
dnsmasq: if CONFIG_IPV6 is off, compile with -DNO_IPV6 - solves unresolved refs to in6addr_any when building with external CodeSourcery toolchain
2012-01-18 19:00:53 +00:00
dropbear
dropbear: patch possible use after free by authenticated remote users with active command restrictions (CVE-2012-0920)
2012-02-25 12:40:46 +00:00
e2fsprogs
update e2fsprogs
2012-02-14 19:07:07 +00:00
ead
ead: fixup some AC_DEFINE() invocations that will make recent automak bail
2010-12-13 01:47:35 +00:00
ebtables
ebtales: update to v2.0.10-4
2012-01-30 14:02:10 +00:00
ep80579-drivers
ep80579 depend on their corresponding subtarget
2010-10-30 22:35:46 +00:00
fbtest
fbtest utility
2012-02-08 10:20:13 +00:00
fconfig
…
firewall
firewall: fix fw__uci_state_del() procedure ( #11132 )
2012-03-13 21:22:13 +00:00
fuse
package/fuse: update to version 2.8.5, refresh patches
2010-12-08 20:15:10 +00:00
gdb
gdb: use an updated 6.8a tarball
2012-02-14 20:13:28 +00:00
goldfish-qemu
cleanup Makefiles ( #7212 )
2010-04-23 11:27:29 +00:00
gpio-button-hotplug
add gpio-button-hotplug, like button-hotplug + gpio-keys-polled, fully compatible, but without the nasty input-core dependency chain
2012-02-20 10:51:43 +00:00
gpioctl
…
grub
package/grub: fix stage2 link with recent binutils
2012-02-12 18:40:18 +00:00
hostap-driver
hostap-driver: introduce "disabled" option for wifi-iface section to shutdown single networks on a radio
2011-09-29 12:37:04 +00:00
hostap-utils
…
hostapd
hostapd: disable the state dump callback to save a few more kb
2012-02-21 00:27:28 +00:00
hotplug2
base-files: process platform hotplug calls in the early launch of hotplug2 to avoid having crda calls get stuck at boot time ( fixes #10350 , #10354 )
2011-11-05 17:16:01 +00:00
i2c-gpio-custom
massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950
2010-07-12 14:06:13 +00:00
ifenslave
remove obsolete kernel dependencies and version checks
2010-06-26 20:44:28 +00:00
iproute2
iproute2: update to 2.6.39
2011-10-07 16:03:12 +00:00
iptables
iptables: make it possible to dynamically configure built-in statically linked extensions, fold -mod-conntrack and -mod-nat into the default package. saves about 8k on an ar71xx default squashfs
2012-02-22 01:47:48 +00:00
iw
iw: update to version 3.3, sync with latest nl80211.h changes
2012-02-07 11:28:21 +00:00
iwcap
iwcap: fix reversed umask
2012-02-27 23:08:15 +00:00
iwinfo
iwinfo: fix integer overflow in assoclist rate reporting ( #11073 )
2012-03-05 17:52:46 +00:00
ixp4xx-microcode
…
kernel
Add support for the 8250 UART module.
2012-03-18 19:49:22 +00:00
kexec-tools
kexec-tools: update to 2.0.3 ( fixes #9846 )
2012-02-13 12:36:36 +00:00
libbsd
libbsd: do not build when using uclibc
2011-06-16 14:34:47 +00:00
libipfix
…
libjson-c
change PKG_FIXUP:=libtool to PKG_FIXUP:=autoreconf
2011-03-06 21:42:48 +00:00
libnl
libnl: update to version 2.0 (patch by Philip Prindeville)
2011-02-13 03:56:12 +00:00
libnl-tiny
libnl-tiny: export unl_genl_multicast_id()
2012-01-14 13:50:21 +00:00
libpcap
libpcap: properly fix fPIC handling (reverts $(FPIC) added in r26999)
2011-05-24 10:42:49 +00:00
libreadline
libreadline: install *.so symlinks as well ( #4872 )
2010-08-27 20:13:17 +00:00
librpc
librpc: do not build if external or native toolchains are used
2011-12-08 16:49:45 +00:00
libtool
libtool: remove patches, they don't apply to libltdl
2010-12-18 18:13:12 +00:00
libubox
libubox: update to latest version, fix some endian issues
2011-12-06 15:59:53 +00:00
linux-atm
package/linux-atm: use new service wrappers
2011-11-08 22:48:00 +00:00
ltq-dsl
add annex selection support to ltq_dsl package
2012-02-14 15:05:49 +00:00
ltq-dsl-app
add annex selection support to ltq_dsl package
2012-02-14 15:05:49 +00:00
ltq-ifxos
wrong md5sum in ltq-ifxos
2011-07-10 10:40:37 +00:00
ltq-kpi2udp
* adss in-kernel udp redirect plugin for lantiq voice optimisation
2011-02-07 21:48:55 +00:00
ltq-tapi
ltq-tapi/vmmc were build on none lantiq targets due to bad builddepends of pjsip
2011-07-06 19:02:27 +00:00
ltq-tapidemo
replace all references to xway with danube
2011-07-07 18:20:37 +00:00
ltq-vmmc
ltq-vmmc: should be available for falcon and danube only
2011-11-03 15:16:25 +00:00
lua
lua: remove posix from Lua core, almost nothing uses it - saves 9k compressed
2011-05-04 14:51:06 +00:00
mac80211
mac80211: reduce cpu load by optimizing aggregation session timeout handling
2012-03-17 22:34:58 +00:00
maccalc
package/maccalc: don't expect to get all data in one read
2011-09-21 11:47:35 +00:00
madwifi
package/madwifi: apply AR71XX PCI workaround on ATH79 as well
2012-02-10 13:16:50 +00:00
mkelfimage
move mkelfimage from tools/ to package/ as it needs a proper i386 toolchain - make the package hidden so that it is automatically built without having to be selected
2011-07-02 06:49:36 +00:00
mmc_over_gpio
mmc_over_gpio: mark /etc/config/mmc_over_gpio as conffile
2010-10-05 17:21:03 +00:00
mountd
mountd: correctly handle poll() timeout case, solves possible 100% CPU load when idle ( #7293 )
2011-07-17 11:58:05 +00:00
mtd
mtd: define MTDREFRESH if not defined (external kernel)
2012-02-06 17:15:40 +00:00
ncurses
ncurses: enable C++ bindings ( #9442 )
2011-05-22 16:53:09 +00:00
netifd
netifd: fix ipv6 issues, add sit tunnel support
2012-03-15 09:49:29 +00:00
nvram
add maintainer information
2010-09-30 10:48:37 +00:00
ocf-crypto-headers
ocf-linux: version bump to 20110720
2011-07-24 14:17:58 +00:00
om-watchdog
package: add om-watchdog package
2012-01-04 17:30:39 +00:00
openssl
openssl 1.0.1 update patch
2012-03-18 19:46:01 +00:00
opkg
opkg: fix a double free of pkg vectors when recursively removing packages due to --autoremove
2011-10-15 01:05:25 +00:00
owsip
add a simple sip client
2012-02-14 15:05:52 +00:00
pjsip
drop obselete Config.in file
2012-02-14 17:48:01 +00:00
ppp
package/ppp: fix typo in r28868 ( closes : #10429 )
2011-11-15 23:40:39 +00:00
pptp
pptp: remove support for underlying ipproto, it is adviced since a while that pptp should be declared as separate interface alognside wan - in this configuration the ipproto will cause stray udhcpc errors due to not existent interfaces, so remove it
2012-01-08 15:41:34 +00:00
ps3-utils
ps3-utils git repository fix
2012-03-18 21:08:39 +00:00
pwm-gpio-custom
pwm-gpio-custom: fix compile on linux 2.6.31
2010-08-19 12:49:42 +00:00
px5g
add maintainer information
2010-09-30 10:48:37 +00:00
qos-scripts
qos-scripts: only use the lower 8 bits for firewall marks, allows coexistence with other programs like nodogsplash - patch by Tobias Wolf ( #10096 )
2011-11-03 19:11:01 +00:00
rbcfg
package/rbcfg: new tool for modifying boot configuration on the RB4xx boards
2011-06-29 09:40:54 +00:00
redboot-ar231x
redboot-ar231x: mark as broken, the ecos host tool crap needs some rework for tcl on some systems
2011-03-25 00:55:25 +00:00
relayd
package/relayd: use new service wrappers
2011-11-08 22:48:11 +00:00
resolveip
resolveip: fix whitespace
2011-07-17 22:47:56 +00:00
robocfg
…
rotary-gpio-custom
Add package rotary-gpio-custom
2010-07-22 11:32:27 +00:00
rtc-rv5c386a
rtc-rv5c386a: add support for kernel 3.0
2011-08-04 20:06:17 +00:00
sierra-directip
add sierra-directip, a package based on the latest DirectIP capable sierra wireless drivers + some fixes
2011-10-27 20:29:05 +00:00
siit
massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950
2010-07-12 14:06:13 +00:00
soloscli
soloscli: fix new lines in soloscli
2011-06-02 14:38:01 +00:00
spi-ks8995
massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950
2010-07-12 14:06:13 +00:00
spidev_test
remove obsolete kernel dependencies and version checks
2010-06-26 20:44:28 +00:00
swconfig
swconfig: fix off-by-one error, causing segfaults on gcc 4.6+ ( fixes #9765 )
2012-02-12 19:27:01 +00:00
switch
switch: the hardware must be up while configuring Since the removal of the interface coldplug hack the timing changed in such a way that eth0 is not up during switch setup, leading to an inaccesible device. Bring up the switch interface before configuring it to mitigate the problem.
2012-03-13 21:15:41 +00:00
uboot-ar71xx
uboot-ar71xx: add a dependency on the ar71xx target
2011-04-15 15:41:49 +00:00
uboot-envtools
package/uboot-envtools: make fw_setenv symlink optional
2011-11-01 09:23:29 +00:00
uboot-kirkwood
Fixed support for Iomega
2010-10-27 21:24:06 +00:00
uboot-lantiq
uboot-lantiq: not all configs were using lzma for compression, add gigaset ramboot image
2011-11-13 12:09:34 +00:00
uboot-omap4
add support for OMAP4 based boards, starting with the PandaBoard
2012-01-14 23:02:56 +00:00
uboot-omap35xx
Change u-boot console device to reflect change in omap serial driver
2011-08-19 12:01:30 +00:00
uboot-xburst
uboot-{kirkwood,xburst}: Fix typo in U-Boot image name, thanks framer99 ( #8112 )
2010-10-21 08:54:36 +00:00
ubus
ubus: update to the latest version
2011-12-06 16:00:00 +00:00
uci
uci: update to git head, reduces quotations in exported config files and fixes delta list handling in the Lua binding
2012-02-24 18:07:06 +00:00
udev
udev: Provide define to enable compilation with kernel 2.6.32.33 headers
2011-10-14 11:42:40 +00:00
uhttpd
uhttpd: reorder compiler flags to fix native build on Ubuntu 11.x
2012-03-13 20:41:31 +00:00
usbreset
add usbreset - a small simple utility to send port rests to selected usb devices ( #10394 )
2011-12-25 13:59:17 +00:00
util-linux-ng
util-linux-ng: make build depend on libncurses, cfdisk is compiled unconditionally and will fail with missing input files if ncurses was not detected during configure
2010-09-08 06:35:23 +00:00
vsc73x5-ucode
vsc73x5-ucode: use the mirrored ucode files from my server to replace an 127 MB download with a 14k one
2010-04-30 16:11:31 +00:00
w1-gpio-custom
massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950
2010-07-12 14:06:13 +00:00
wireless-tools
wireless-tools: remove some more unnecessary stuff from iwconfig
2011-03-18 03:41:22 +00:00
wprobe
fix wprobe build for arm on 3.2
2012-01-30 14:02:13 +00:00
wrt55agv2-spidevs
wrt55agv2-spidevs: fix build with recent kernel
2011-10-22 10:40:45 +00:00
xfsprogs
Update xfsprogs to 3.1.4 to 3.1.7
2012-03-17 21:30:31 +00:00
yamonenv
package/yamonenv: refresh patches
2010-03-26 14:29:32 +00:00
zlib
zlib: parallel build has been reported to break this package, disable it ( #10948 )
2012-02-10 16:13:37 +00:00
Makefile
make sure that base-files is installed last, this allows per-target base-file overlays to work correctly
2011-06-08 19:38:25 +00:00
2659bfe969