hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt/target/linux/brcm47xx/patches-2.6.36/700-ssb-gigabit-ethernet-dr...

329 lines
10 KiB
Diff
Raw Blame History

--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -42,6 +42,7 @@
#include <linux/prefetch.h>
#include <linux/dma-mapping.h>
#include <linux/firmware.h>
+#include <linux/ssb/ssb_driver_gige.h>
#include <net/checksum.h>
#include <net/ip.h>
@@ -494,8 +495,9 @@ static void _tw32_flush(struct tg3 *tp,
static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
{
tp->write32_mbox(tp, off, val);
- if (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
- !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
+ if ((tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) ||
+ (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
+ !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND)))
tp->read32_mbox(tp, off);
}
@@ -505,7 +507,7 @@ static void tg3_write32_tx_mbox(struct t
writel(val, mbox);
if (tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG)
writel(val, mbox);
- if (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)
+ if ((tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) || (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES))
readl(mbox);
}
@@ -824,7 +826,7 @@ static void tg3_switch_clocks(struct tg3
#define PHY_BUSY_LOOPS 5000
-static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
+static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 *val)
{
u32 frame_val;
unsigned int loops;
@@ -838,7 +840,7 @@ static int tg3_readphy(struct tg3 *tp, i
*val = 0x0;
- frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
@@ -873,7 +875,12 @@ static int tg3_readphy(struct tg3 *tp, i
return ret;
}
-static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
+static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
+{
+ return __tg3_readphy(tp, tp->phy_addr, reg, val);
+}
+
+static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 val)
{
u32 frame_val;
unsigned int loops;
@@ -889,7 +896,7 @@ static int tg3_writephy(struct tg3 *tp,
udelay(80);
}
- frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
@@ -922,6 +929,11 @@ static int tg3_writephy(struct tg3 *tp,
return ret;
}
+static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
+{
+ return __tg3_writephy(tp, tp->phy_addr, reg, val);
+}
+
static int tg3_bmcr_reset(struct tg3 *tp)
{
u32 phy_control;
@@ -2426,6 +2438,9 @@ static int tg3_nvram_read(struct tg3 *tp
{
int ret;
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
+ return -ENODEV;
+
if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
return tg3_nvram_read_using_eeprom(tp, offset, val);
@@ -2757,8 +2772,10 @@ static int tg3_set_power_state(struct tg
tg3_frob_aux_power(tp);
/* Workaround for unstable PLL clock */
- if ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
- (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX)) {
+ if ((tp->phy_id & TG3_PHY_ID_MASK) != TG3_PHY_ID_BCM5750_2 &&
+ /* !!! FIXME !!! */
+ ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
+ (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX))) {
u32 val = tr32(0x7d00);
val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
@@ -3242,6 +3259,14 @@ relink:
tg3_phy_copper_begin(tp);
+ if (tp->tg3_flags3 & TG3_FLG3_ROBOSWITCH) {
+ current_link_up = 1;
+ current_speed = SPEED_1000; /* FIXME */
+ current_duplex = DUPLEX_FULL;
+ tp->link_config.active_speed = current_speed;
+ tp->link_config.active_duplex = current_duplex;
+ }
+
tg3_readphy(tp, MII_BMSR, &tmp);
if (!tg3_readphy(tp, MII_BMSR, &tmp) &&
(tmp & BMSR_LSTATUS))
@@ -6760,6 +6785,11 @@ static int tg3_poll_fw(struct tg3 *tp)
int i;
u32 val;
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
+ /* We don't use firmware. */
+ return 0;
+ }
+
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
/* Wait up to 20ms for init done. */
for (i = 0; i < 200; i++) {
@@ -7050,6 +7080,14 @@ static int tg3_chip_reset(struct tg3 *tp
tw32(0x5000, 0x400);
}
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
+ /* BCM4785: In order to avoid repercussions from using potentially
+ * defective internal ROM, stop the Rx RISC CPU, which is not
+ * required. */
+ tg3_stop_fw(tp);
+ tg3_halt_cpu(tp, RX_CPU_BASE);
+ }
+
tw32(GRC_MODE, tp->grc_mode);
if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
@@ -7202,9 +7240,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
return -ENODEV;
}
- /* Clear firmware's nvram arbitration. */
- if (tp->tg3_flags & TG3_FLAG_NVRAM)
- tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
+ if (!(tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)) {
+ /* Clear firmware's nvram arbitration. */
+ if (tp->tg3_flags & TG3_FLAG_NVRAM)
+ tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
+ }
+
return 0;
}
@@ -7267,6 +7308,11 @@ static int tg3_load_5701_a0_firmware_fix
const __be32 *fw_data;
int err, i;
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
+ /* We don't use firmware. */
+ return 0;
+ }
+
fw_data = (void *)tp->fw->data;
/* Firmware blob starts with version numbers, followed by
@@ -7325,6 +7371,11 @@ static int tg3_load_tso_firmware(struct
unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
int err, i;
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
+ /* We don't use firmware. */
+ return 0;
+ }
+
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
return 0;
@@ -8474,6 +8525,11 @@ static void tg3_timer(unsigned long __op
spin_lock(&tp->lock);
+ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
+ /* BCM4785: Flush posted writes from GbE to host memory. */
+ tr32(HOSTCC_MODE);
+ }
+
if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
/* All of this garbage is because when using non-tagged
* IRQ status the mailbox/status_block protocol the chip
@@ -10133,6 +10189,11 @@ static int tg3_test_nvram(struct tg3 *tp
if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM)
return 0;
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
+ /* We don't have NVRAM. */
+ return 0;
+ }
+
if (tg3_nvram_read(tp, 0, &magic) != 0)
return -EIO;
@@ -10953,7 +11014,7 @@ static int tg3_ioctl(struct net_device *
return -EAGAIN;
spin_lock_bh(&tp->lock);
- err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval);
+ err = __tg3_readphy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval);
spin_unlock_bh(&tp->lock);
data->val_out = mii_regval;
@@ -10969,7 +11030,7 @@ static int tg3_ioctl(struct net_device *
return -EAGAIN;
spin_lock_bh(&tp->lock);
- err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in);
+ err = __tg3_writephy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
spin_unlock_bh(&tp->lock);
return err;
@@ -11614,6 +11675,12 @@ static void __devinit tg3_get_5717_nvram
/* Chips other than 5700/5701 use the NVRAM for fetching info. */
static void __devinit tg3_nvram_init(struct tg3 *tp)
{
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
+ /* No NVRAM and EEPROM on the SSB Broadcom GigE core. */
+ tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED);
+ return;
+ }
+
tw32_f(GRC_EEPROM_ADDR,
(EEPROM_ADDR_FSM_RESET |
(EEPROM_DEFAULT_CLOCK_PERIOD <<
@@ -11877,6 +11944,9 @@ static int tg3_nvram_write_block(struct
{
int ret;
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
+ return -ENODEV;
+
if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
~GRC_LCLCTRL_GPIO_OUTPUT1);
@@ -13269,6 +13339,11 @@ static int __devinit tg3_get_invariants(
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
+ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
+ tp->write32_tx_mbox = tg3_write_flush_reg32;
+ tp->write32_rx_mbox = tg3_write_flush_reg32;
+ }
+
/* Get eeprom hw config before calling tg3_set_power_state().
* In particular, the TG3_FLG2_IS_NIC flag must be
* determined before calling tg3_set_power_state() so that
@@ -13667,6 +13742,10 @@ static int __devinit tg3_get_device_addr
}
if (!is_valid_ether_addr(&dev->dev_addr[0])) {
+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
+ ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]);
+ }
+ if (!is_valid_ether_addr(&dev->dev_addr[0])) {
#ifdef CONFIG_SPARC
if (!tg3_get_default_macaddr_sparc(tp))
return 0;
@@ -14183,6 +14262,7 @@ static char * __devinit tg3_phy_string(s
case TG3_PHY_ID_BCM5704: return "5704";
case TG3_PHY_ID_BCM5705: return "5705";
case TG3_PHY_ID_BCM5750: return "5750";
+ case TG3_PHY_ID_BCM5750_2: return "5750-2";
case TG3_PHY_ID_BCM5752: return "5752";
case TG3_PHY_ID_BCM5714: return "5714";
case TG3_PHY_ID_BCM5780: return "5780";
@@ -14394,6 +14474,13 @@ static int __devinit tg3_init_one(struct
tp->msg_enable = tg3_debug;
else
tp->msg_enable = TG3_DEF_MSG_ENABLE;
+ if (pdev_is_ssb_gige_core(pdev)) {
+ tp->tg3_flags3 |= TG3_FLG3_IS_SSB_CORE;
+ if (ssb_gige_must_flush_posted_writes(pdev))
+ tp->tg3_flags3 |= TG3_FLG3_FLUSH_POSTED_WRITES;
+ if (ssb_gige_have_roboswitch(pdev))
+ tp->tg3_flags3 |= TG3_FLG3_ROBOSWITCH;
+ }
/* The word/byte swap controls here control register access byte
* swapping. DMA data byte swapping is controlled in the GRC_MODE
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2020,6 +2020,9 @@
#define NIC_SRAM_RGMII_INBAND_DISABLE 0x00000004
#define NIC_SRAM_RGMII_EXT_IBND_RX_EN 0x00000008
#define NIC_SRAM_RGMII_EXT_IBND_TX_EN 0x00000010
+#define TG3_FLG3_IS_SSB_CORE 0x00000800
+#define TG3_FLG3_FLUSH_POSTED_WRITES 0x00001000
+#define TG3_FLG3_ROBOSWITCH 0x00002000
#define NIC_SRAM_RX_MINI_BUFFER_DESC 0x00001000
@@ -2908,6 +2911,7 @@ struct tg3 {
#define TG3_PHY_ID_BCM5704 0x60008190
#define TG3_PHY_ID_BCM5705 0x600081a0
#define TG3_PHY_ID_BCM5750 0x60008180
+#define TG3_PHY_ID_BCM5750_2 0xbc050cd0
#define TG3_PHY_ID_BCM5752 0x60008100
#define TG3_PHY_ID_BCM5714 0x60008340
#define TG3_PHY_ID_BCM5780 0x60008350
@@ -2944,7 +2948,7 @@ struct tg3 {
(X) == TG3_PHY_ID_BCM5906 || (X) == TG3_PHY_ID_BCM5761 || \
(X) == TG3_PHY_ID_BCM5718C || (X) == TG3_PHY_ID_BCM5718S || \
(X) == TG3_PHY_ID_BCM57765 || (X) == TG3_PHY_ID_BCM5719C || \
- (X) == TG3_PHY_ID_BCM8002)
+ (X) == TG3_PHY_ID_BCM8002 || (X) == TG3_PHY_ID_BCM5750_2)
u32 phy_flags;
#define TG3_PHYFLG_IS_LOW_POWER 0x00000001
Reference in New Issue View Git Blame Copy Permalink