mirror of https://github.com/hak5/openwrt.git
41feba8c4a
When sta is configured, hostapd receives 'stop' and 'update' command from
wpa_supplicant. In the update command, hostapd gets sta parameters with
which it configures ap.
Problem is, with the default wireless configuration:
mode:11g freq:2.4GHz channel:1
If sta is connected to 5GHz network, then ap does not work. Ideally with
340-reload_freq_change.patch hostapd should reload the frequency changes
and start ap in 5GHz, but ap becomes invisible in the network.
This issue can be reproduced with following /etc/config/wireless:
config wifi-device radio0
option type mac80211
option channel 1
option hwmode 11g
option path 'virtual/uccp420/uccwlan'
option htmode 'none'
config wifi-iface 'ap'
option device 'radio0'
option encryption 'none'
option mode 'ap'
option network 'ap'
option ssid 'MyTestNet'
option encryption none
config wifi-iface 'sta'
option device radio0
option network sta
option mode sta
option ssid TestNet-5G
option encryption psk2
option key 12345
This change updates current_mode structure based on configured hw_mode
received from wpa_supplicant. Also prepare rates table after frequency
selection.
Signed-off-by: Abhilash Tuse <Abhilash.Tuse@imgtec.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup, patch refresh]
|
||
|---|---|---|
| .. | ||
| 001-Fix-race-condition-between-AssocResp-callback-and-4a.patch | ||
| 002-Fix-duplicate-Reassociation-Request-frame-dropping.patch | ||
| 003-RSN-IBSS-Fix-TK-clearing-on-Authentication-frame-RX.patch | ||
| 004-hostapd-Add-possibility-to-send-debug-messages-to-sy.patch | ||
| 100-daemonize_fix.patch | ||
| 110-no_eapol_fix.patch | ||
| 120-disable_bridge_packet_workaround.patch | ||
| 200-multicall.patch | ||
| 300-noscan.patch | ||
| 310-rescan_immediately.patch | ||
| 320-optional_rfkill.patch | ||
| 330-nl80211_fix_set_freq.patch | ||
| 340-reload_freq_change.patch | ||
| 350-nl80211_del_beacon_bss.patch | ||
| 360-ctrl_iface_reload.patch | ||
| 370-ap_sta_support.patch | ||
| 380-disable_ctrl_iface_mib.patch | ||
| 390-wpa_ie_cap_workaround.patch | ||
| 400-wps_single_auth_enc_type.patch | ||
| 410-limit_debug_messages.patch | ||
| 420-indicate-features.patch | ||
| 430-hostapd_cli_ifdef.patch | ||
| 431-wpa_cli_ifdef.patch | ||
| 432-missing-typedef.patch | ||
| 450-scan_wait.patch | ||
| 460-wpa_supplicant-add-new-config-params-to-be-used-with.patch | ||
| 461-driver_nl80211-use-new-parameters-during-ibss-join.patch | ||
| 462-wpa_s-support-htmode-param.patch | ||
| 470-survey_data_fallback.patch | ||
| 600-ubus_support.patch | ||