openwrt/target/linux/brcm2708/patches-4.4/0466-drm-vc4-Enable-runtime...

206 lines
5.2 KiB
Diff

From 02a0346c7f8159cb0930ff153bf2cb3b1f1a7a79 Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Fri, 5 Feb 2016 17:41:49 -0800
Subject: [PATCH] drm/vc4: Enable runtime PM.
This may actually get us a feature that the closed driver didn't have:
turning off the GPU in between rendering jobs, while the V3D device is
still opened by the client.
There may be some tuning to be applied here to use autosuspend so that
we don't bounce the device's power so much, but in steady-state
GPU-bound rendering we keep the power on (since we keep multiple jobs
outstanding) and even if we power cycle on every job we can still
manage at least 680 fps.
More importantly, though, runtime PM will allow us to power off the
device to do a GPU reset.
v2: Switch #ifdef to CONFIG_PM not CONFIG_PM_SLEEP (caught by kbuild
test robot)
Signed-off-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 001bdb55d9eb72a9e2d5b623bacfc52da74ae03e)
---
drivers/gpu/drm/vc4/vc4_drv.h | 1 +
drivers/gpu/drm/vc4/vc4_gem.c | 10 ++++++++
drivers/gpu/drm/vc4/vc4_v3d.c | 59 ++++++++++++++++++++++++++-----------------
3 files changed, 47 insertions(+), 23 deletions(-)
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -155,6 +155,7 @@ struct vc4_seqno_cb {
};
struct vc4_v3d {
+ struct vc4_dev *vc4;
struct platform_device *pdev;
void __iomem *regs;
};
--- a/drivers/gpu/drm/vc4/vc4_gem.c
+++ b/drivers/gpu/drm/vc4/vc4_gem.c
@@ -23,6 +23,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/device.h>
#include <linux/io.h>
@@ -689,6 +690,7 @@ fail:
static void
vc4_complete_exec(struct drm_device *dev, struct vc4_exec_info *exec)
{
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
unsigned i;
/* Need the struct lock for drm_gem_object_unreference(). */
@@ -707,6 +709,8 @@ vc4_complete_exec(struct drm_device *dev
}
mutex_unlock(&dev->struct_mutex);
+ pm_runtime_put(&vc4->v3d->pdev->dev);
+
kfree(exec);
}
@@ -860,6 +864,12 @@ vc4_submit_cl_ioctl(struct drm_device *d
return -ENOMEM;
}
+ ret = pm_runtime_get_sync(&vc4->v3d->pdev->dev);
+ if (ret < 0) {
+ kfree(exec);
+ return ret;
+ }
+
exec->args = args;
INIT_LIST_HEAD(&exec->unref_list);
--- a/drivers/gpu/drm/vc4/vc4_v3d.c
+++ b/drivers/gpu/drm/vc4/vc4_v3d.c
@@ -17,7 +17,7 @@
*/
#include "linux/component.h"
-#include "soc/bcm2835/raspberrypi-firmware.h"
+#include "linux/pm_runtime.h"
#include "vc4_drv.h"
#include "vc4_regs.h"
@@ -145,22 +145,6 @@ int vc4_v3d_debugfs_ident(struct seq_fil
}
#endif /* CONFIG_DEBUG_FS */
-/*
- * Asks the firmware to turn on power to the V3D engine.
- *
- * This may be doable with just the clocks interface, though this
- * packet does some other register setup from the firmware, too.
- */
-int
-vc4_v3d_set_power(struct vc4_dev *vc4, bool on)
-{
- u32 packet = on;
-
- return rpi_firmware_property(vc4->firmware,
- RPI_FIRMWARE_SET_ENABLE_QPU,
- &packet, sizeof(packet));
-}
-
static void vc4_v3d_init_hw(struct drm_device *dev)
{
struct vc4_dev *vc4 = to_vc4_dev(dev);
@@ -172,6 +156,29 @@ static void vc4_v3d_init_hw(struct drm_d
V3D_WRITE(V3D_VPMBASE, 0);
}
+#ifdef CONFIG_PM
+static int vc4_v3d_runtime_suspend(struct device *dev)
+{
+ struct vc4_v3d *v3d = dev_get_drvdata(dev);
+ struct vc4_dev *vc4 = v3d->vc4;
+
+ vc4_irq_uninstall(vc4->dev);
+
+ return 0;
+}
+
+static int vc4_v3d_runtime_resume(struct device *dev)
+{
+ struct vc4_v3d *v3d = dev_get_drvdata(dev);
+ struct vc4_dev *vc4 = v3d->vc4;
+
+ vc4_v3d_init_hw(vc4->dev);
+ vc4_irq_postinstall(vc4->dev);
+
+ return 0;
+}
+#endif
+
static int vc4_v3d_bind(struct device *dev, struct device *master, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -184,6 +191,8 @@ static int vc4_v3d_bind(struct device *d
if (!v3d)
return -ENOMEM;
+ dev_set_drvdata(dev, v3d);
+
v3d->pdev = pdev;
v3d->regs = vc4_ioremap_regs(pdev, 0);
@@ -191,10 +200,7 @@ static int vc4_v3d_bind(struct device *d
return PTR_ERR(v3d->regs);
vc4->v3d = v3d;
-
- ret = vc4_v3d_set_power(vc4, true);
- if (ret)
- return ret;
+ v3d->vc4 = vc4;
if (V3D_READ(V3D_IDENT0) != V3D_EXPECTED_IDENT0) {
DRM_ERROR("V3D_IDENT0 read 0x%08x instead of 0x%08x\n",
@@ -216,6 +222,8 @@ static int vc4_v3d_bind(struct device *d
return ret;
}
+ pm_runtime_enable(dev);
+
return 0;
}
@@ -225,6 +233,8 @@ static void vc4_v3d_unbind(struct device
struct drm_device *drm = dev_get_drvdata(master);
struct vc4_dev *vc4 = to_vc4_dev(drm);
+ pm_runtime_disable(dev);
+
drm_irq_uninstall(drm);
/* Disable the binner's overflow memory address, so the next
@@ -234,11 +244,13 @@ static void vc4_v3d_unbind(struct device
V3D_WRITE(V3D_BPOA, 0);
V3D_WRITE(V3D_BPOS, 0);
- vc4_v3d_set_power(vc4, false);
-
vc4->v3d = NULL;
}
+static const struct dev_pm_ops vc4_v3d_pm_ops = {
+ SET_RUNTIME_PM_OPS(vc4_v3d_runtime_suspend, vc4_v3d_runtime_resume, NULL)
+};
+
static const struct component_ops vc4_v3d_ops = {
.bind = vc4_v3d_bind,
.unbind = vc4_v3d_unbind,
@@ -267,5 +279,6 @@ struct platform_driver vc4_v3d_driver =
.driver = {
.name = "vc4_v3d",
.of_match_table = vc4_v3d_dt_match,
+ .pm = &vc4_v3d_pm_ops,
},
};