mirror of https://github.com/hak5/openwrt.git
73 lines
2.3 KiB
Diff
73 lines
2.3 KiB
Diff
From 17467b182d70d76c27d8e498abb281b28f58f92c Mon Sep 17 00:00:00 2001
|
|
From: Eric Anholt <eric@anholt.net>
|
|
Date: Fri, 12 Feb 2016 14:15:14 -0800
|
|
Subject: [PATCH] drm/vc4: Bring HDMI up from power off if necessary.
|
|
|
|
If the firmware hadn't brought up HDMI for us, we need to do its
|
|
power-on reset sequence (reset HD and and clear its STANDBY bits,
|
|
reset HDMI, and leave the PHY disabled).
|
|
|
|
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
(cherry picked from commit 851479ad5927b7b1aa141ca9dedb897a7bce2b1d)
|
|
---
|
|
drivers/gpu/drm/vc4/vc4_hdmi.c | 29 ++++++++++++++++++++++++++++-
|
|
drivers/gpu/drm/vc4/vc4_regs.h | 2 ++
|
|
2 files changed, 30 insertions(+), 1 deletion(-)
|
|
|
|
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
|
|
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
|
|
@@ -497,6 +497,16 @@ static int vc4_hdmi_bind(struct device *
|
|
goto err_put_i2c;
|
|
}
|
|
|
|
+ /* This is the rate that is set by the firmware. The number
|
|
+ * needs to be a bit higher than the pixel clock rate
|
|
+ * (generally 148.5Mhz).
|
|
+ */
|
|
+ ret = clk_set_rate(hdmi->hsm_clock, 163682864);
|
|
+ if (ret) {
|
|
+ DRM_ERROR("Failed to set HSM clock rate: %d\n", ret);
|
|
+ goto err_unprepare_pix;
|
|
+ }
|
|
+
|
|
ret = clk_prepare_enable(hdmi->hsm_clock);
|
|
if (ret) {
|
|
DRM_ERROR("Failed to turn on HDMI state machine clock: %d\n",
|
|
@@ -518,7 +528,24 @@ static int vc4_hdmi_bind(struct device *
|
|
vc4->hdmi = hdmi;
|
|
|
|
/* HDMI core must be enabled. */
|
|
- WARN_ON_ONCE((HD_READ(VC4_HD_M_CTL) & VC4_HD_M_ENABLE) == 0);
|
|
+ if (!(HD_READ(VC4_HD_M_CTL) & VC4_HD_M_ENABLE)) {
|
|
+ HD_WRITE(VC4_HD_M_CTL, VC4_HD_M_SW_RST);
|
|
+ udelay(1);
|
|
+ HD_WRITE(VC4_HD_M_CTL, 0);
|
|
+
|
|
+ HD_WRITE(VC4_HD_M_CTL, VC4_HD_M_ENABLE);
|
|
+
|
|
+ HDMI_WRITE(VC4_HDMI_SW_RESET_CONTROL,
|
|
+ VC4_HDMI_SW_RESET_HDMI |
|
|
+ VC4_HDMI_SW_RESET_FORMAT_DETECT);
|
|
+
|
|
+ HDMI_WRITE(VC4_HDMI_SW_RESET_CONTROL, 0);
|
|
+
|
|
+ /* PHY should be in reset, like
|
|
+ * vc4_hdmi_encoder_disable() does.
|
|
+ */
|
|
+ HDMI_WRITE(VC4_HDMI_TX_PHY_RESET_CTL, 0xf << 16);
|
|
+ }
|
|
|
|
drm_encoder_init(drm, hdmi->encoder, &vc4_hdmi_encoder_funcs,
|
|
DRM_MODE_ENCODER_TMDS);
|
|
--- a/drivers/gpu/drm/vc4/vc4_regs.h
|
|
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
|
|
@@ -456,6 +456,8 @@
|
|
#define VC4_HDMI_TX_PHY_RESET_CTL 0x2c0
|
|
|
|
#define VC4_HD_M_CTL 0x00c
|
|
+# define VC4_HD_M_REGISTER_FILE_STANDBY (3 << 6)
|
|
+# define VC4_HD_M_RAM_STANDBY (3 << 4)
|
|
# define VC4_HD_M_SW_RST BIT(2)
|
|
# define VC4_HD_M_ENABLE BIT(0)
|
|
|