openwrt/target/linux/brcm2708/patches-4.4/0260-clk-bcm2835-reorganize...

926 lines
26 KiB
Diff

From c0e6c2ae19400047ad0f744f95b6997b579e0ffc Mon Sep 17 00:00:00 2001
From: Martin Sperl <kernel@martin.sperl.org>
Date: Mon, 29 Feb 2016 12:51:42 +0000
Subject: [PATCH] clk: bcm2835: reorganize bcm2835_clock_array assignment
Reorganize bcm2835_clock_array so that there is no more
need for separate bcm2835_*_data structures to be defined.
Instead the required structures are generated inline via
helper macros.
To allow this to also work for pll alone it was required that
the parent_pll was changed from a pointer to bcm2835_pll_data
to the name of the pll instead.
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 3b15afefbef9b5952e3d68ad73d93f981b9faca8)
---
drivers/clk/bcm/clk-bcm2835.c | 852 +++++++++++++++++++-----------------------
1 file changed, 393 insertions(+), 459 deletions(-)
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -418,115 +418,10 @@ static const struct bcm2835_pll_ana_bits
.fb_prediv_mask = BIT(11),
};
-/*
- * PLLA is the auxiliary PLL, used to drive the CCP2 (Compact Camera
- * Port 2) transmitter clock.
- *
- * It is in the PX LDO power domain, which is on when the AUDIO domain
- * is on.
- */
-static const struct bcm2835_pll_data bcm2835_plla_data = {
- .name = "plla",
- .cm_ctrl_reg = CM_PLLA,
- .a2w_ctrl_reg = A2W_PLLA_CTRL,
- .frac_reg = A2W_PLLA_FRAC,
- .ana_reg_base = A2W_PLLA_ANA0,
- .reference_enable_mask = A2W_XOSC_CTRL_PLLA_ENABLE,
- .lock_mask = CM_LOCK_FLOCKA,
-
- .ana = &bcm2835_ana_default,
-
- .min_rate = 600000000u,
- .max_rate = 2400000000u,
- .max_fb_rate = BCM2835_MAX_FB_RATE,
-};
-
-/* PLLB is used for the ARM's clock. */
-static const struct bcm2835_pll_data bcm2835_pllb_data = {
- .name = "pllb",
- .cm_ctrl_reg = CM_PLLB,
- .a2w_ctrl_reg = A2W_PLLB_CTRL,
- .frac_reg = A2W_PLLB_FRAC,
- .ana_reg_base = A2W_PLLB_ANA0,
- .reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE,
- .lock_mask = CM_LOCK_FLOCKB,
-
- .ana = &bcm2835_ana_default,
-
- .min_rate = 600000000u,
- .max_rate = 3000000000u,
- .max_fb_rate = BCM2835_MAX_FB_RATE,
-};
-
-/*
- * PLLC is the core PLL, used to drive the core VPU clock.
- *
- * It is in the PX LDO power domain, which is on when the AUDIO domain
- * is on.
-*/
-static const struct bcm2835_pll_data bcm2835_pllc_data = {
- .name = "pllc",
- .cm_ctrl_reg = CM_PLLC,
- .a2w_ctrl_reg = A2W_PLLC_CTRL,
- .frac_reg = A2W_PLLC_FRAC,
- .ana_reg_base = A2W_PLLC_ANA0,
- .reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE,
- .lock_mask = CM_LOCK_FLOCKC,
-
- .ana = &bcm2835_ana_default,
-
- .min_rate = 600000000u,
- .max_rate = 3000000000u,
- .max_fb_rate = BCM2835_MAX_FB_RATE,
-};
-
-/*
- * PLLD is the display PLL, used to drive DSI display panels.
- *
- * It is in the PX LDO power domain, which is on when the AUDIO domain
- * is on.
- */
-static const struct bcm2835_pll_data bcm2835_plld_data = {
- .name = "plld",
- .cm_ctrl_reg = CM_PLLD,
- .a2w_ctrl_reg = A2W_PLLD_CTRL,
- .frac_reg = A2W_PLLD_FRAC,
- .ana_reg_base = A2W_PLLD_ANA0,
- .reference_enable_mask = A2W_XOSC_CTRL_DDR_ENABLE,
- .lock_mask = CM_LOCK_FLOCKD,
-
- .ana = &bcm2835_ana_default,
-
- .min_rate = 600000000u,
- .max_rate = 2400000000u,
- .max_fb_rate = BCM2835_MAX_FB_RATE,
-};
-
-/*
- * PLLH is used to supply the pixel clock or the AUX clock for the TV
- * encoder.
- *
- * It is in the HDMI power domain.
- */
-static const struct bcm2835_pll_data bcm2835_pllh_data = {
- "pllh",
- .cm_ctrl_reg = CM_PLLH,
- .a2w_ctrl_reg = A2W_PLLH_CTRL,
- .frac_reg = A2W_PLLH_FRAC,
- .ana_reg_base = A2W_PLLH_ANA0,
- .reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE,
- .lock_mask = CM_LOCK_FLOCKH,
-
- .ana = &bcm2835_ana_pllh,
-
- .min_rate = 600000000u,
- .max_rate = 3000000000u,
- .max_fb_rate = BCM2835_MAX_FB_RATE,
-};
-
struct bcm2835_pll_divider_data {
const char *name;
- const struct bcm2835_pll_data *source_pll;
+ const char *source_pll;
+
u32 cm_reg;
u32 a2w_reg;
@@ -535,124 +430,6 @@ struct bcm2835_pll_divider_data {
u32 fixed_divider;
};
-static const struct bcm2835_pll_divider_data bcm2835_plla_core_data = {
- .name = "plla_core",
- .source_pll = &bcm2835_plla_data,
- .cm_reg = CM_PLLA,
- .a2w_reg = A2W_PLLA_CORE,
- .load_mask = CM_PLLA_LOADCORE,
- .hold_mask = CM_PLLA_HOLDCORE,
- .fixed_divider = 1,
-};
-
-static const struct bcm2835_pll_divider_data bcm2835_plla_per_data = {
- .name = "plla_per",
- .source_pll = &bcm2835_plla_data,
- .cm_reg = CM_PLLA,
- .a2w_reg = A2W_PLLA_PER,
- .load_mask = CM_PLLA_LOADPER,
- .hold_mask = CM_PLLA_HOLDPER,
- .fixed_divider = 1,
-};
-
-static const struct bcm2835_pll_divider_data bcm2835_pllb_arm_data = {
- .name = "pllb_arm",
- .source_pll = &bcm2835_pllb_data,
- .cm_reg = CM_PLLB,
- .a2w_reg = A2W_PLLB_ARM,
- .load_mask = CM_PLLB_LOADARM,
- .hold_mask = CM_PLLB_HOLDARM,
- .fixed_divider = 1,
-};
-
-static const struct bcm2835_pll_divider_data bcm2835_pllc_core0_data = {
- .name = "pllc_core0",
- .source_pll = &bcm2835_pllc_data,
- .cm_reg = CM_PLLC,
- .a2w_reg = A2W_PLLC_CORE0,
- .load_mask = CM_PLLC_LOADCORE0,
- .hold_mask = CM_PLLC_HOLDCORE0,
- .fixed_divider = 1,
-};
-
-static const struct bcm2835_pll_divider_data bcm2835_pllc_core1_data = {
- .name = "pllc_core1", .source_pll = &bcm2835_pllc_data,
- .cm_reg = CM_PLLC, A2W_PLLC_CORE1,
- .load_mask = CM_PLLC_LOADCORE1,
- .hold_mask = CM_PLLC_HOLDCORE1,
- .fixed_divider = 1,
-};
-
-static const struct bcm2835_pll_divider_data bcm2835_pllc_core2_data = {
- .name = "pllc_core2",
- .source_pll = &bcm2835_pllc_data,
- .cm_reg = CM_PLLC,
- .a2w_reg = A2W_PLLC_CORE2,
- .load_mask = CM_PLLC_LOADCORE2,
- .hold_mask = CM_PLLC_HOLDCORE2,
- .fixed_divider = 1,
-};
-
-static const struct bcm2835_pll_divider_data bcm2835_pllc_per_data = {
- .name = "pllc_per",
- .source_pll = &bcm2835_pllc_data,
- .cm_reg = CM_PLLC,
- .a2w_reg = A2W_PLLC_PER,
- .load_mask = CM_PLLC_LOADPER,
- .hold_mask = CM_PLLC_HOLDPER,
- .fixed_divider = 1,
-};
-
-static const struct bcm2835_pll_divider_data bcm2835_plld_core_data = {
- .name = "plld_core",
- .source_pll = &bcm2835_plld_data,
- .cm_reg = CM_PLLD,
- .a2w_reg = A2W_PLLD_CORE,
- .load_mask = CM_PLLD_LOADCORE,
- .hold_mask = CM_PLLD_HOLDCORE,
- .fixed_divider = 1,
-};
-
-static const struct bcm2835_pll_divider_data bcm2835_plld_per_data = {
- .name = "plld_per",
- .source_pll = &bcm2835_plld_data,
- .cm_reg = CM_PLLD,
- .a2w_reg = A2W_PLLD_PER,
- .load_mask = CM_PLLD_LOADPER,
- .hold_mask = CM_PLLD_HOLDPER,
- .fixed_divider = 1,
-};
-
-static const struct bcm2835_pll_divider_data bcm2835_pllh_rcal_data = {
- .name = "pllh_rcal",
- .source_pll = &bcm2835_pllh_data,
- .cm_reg = CM_PLLH,
- .a2w_reg = A2W_PLLH_RCAL,
- .load_mask = CM_PLLH_LOADRCAL,
- .hold_mask = 0,
- .fixed_divider = 10,
-};
-
-static const struct bcm2835_pll_divider_data bcm2835_pllh_aux_data = {
- .name = "pllh_aux",
- .source_pll = &bcm2835_pllh_data,
- .cm_reg = CM_PLLH,
- .a2w_reg = A2W_PLLH_AUX,
- .load_mask = CM_PLLH_LOADAUX,
- .hold_mask = 0,
- .fixed_divider = 10,
-};
-
-static const struct bcm2835_pll_divider_data bcm2835_pllh_pix_data = {
- .name = "pllh_pix",
- .source_pll = &bcm2835_pllh_data,
- .cm_reg = CM_PLLH,
- .a2w_reg = A2W_PLLH_PIX,
- .load_mask = CM_PLLH_LOADPIX,
- .hold_mask = 0,
- .fixed_divider = 10,
-};
-
struct bcm2835_clock_data {
const char *name;
@@ -671,188 +448,6 @@ struct bcm2835_clock_data {
bool is_mash_clock;
};
-static const char *const bcm2835_clock_per_parents[] = {
- "gnd",
- "xosc",
- "testdebug0",
- "testdebug1",
- "plla_per",
- "pllc_per",
- "plld_per",
- "pllh_aux",
-};
-
-static const char *const bcm2835_clock_vpu_parents[] = {
- "gnd",
- "xosc",
- "testdebug0",
- "testdebug1",
- "plla_core",
- "pllc_core0",
- "plld_core",
- "pllh_aux",
- "pllc_core1",
- "pllc_core2",
-};
-
-static const char *const bcm2835_clock_osc_parents[] = {
- "gnd",
- "xosc",
- "testdebug0",
- "testdebug1"
-};
-
-/*
- * Used for a 1Mhz clock for the system clocksource, and also used by
- * the watchdog timer and the camera pulse generator.
- */
-static const struct bcm2835_clock_data bcm2835_clock_timer_data = {
- .name = "timer",
- .num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),
- .parents = bcm2835_clock_osc_parents,
- .ctl_reg = CM_TIMERCTL,
- .div_reg = CM_TIMERDIV,
- .int_bits = 6,
- .frac_bits = 12,
-};
-
-/* One Time Programmable Memory clock. Maximum 10Mhz. */
-static const struct bcm2835_clock_data bcm2835_clock_otp_data = {
- .name = "otp",
- .num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),
- .parents = bcm2835_clock_osc_parents,
- .ctl_reg = CM_OTPCTL,
- .div_reg = CM_OTPDIV,
- .int_bits = 4,
- .frac_bits = 0,
-};
-
-/*
- * VPU clock. This doesn't have an enable bit, since it drives the
- * bus for everything else, and is special so it doesn't need to be
- * gated for rate changes. It is also known as "clk_audio" in various
- * hardware documentation.
- */
-static const struct bcm2835_clock_data bcm2835_clock_vpu_data = {
- .name = "vpu",
- .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
- .parents = bcm2835_clock_vpu_parents,
- .ctl_reg = CM_VPUCTL,
- .div_reg = CM_VPUDIV,
- .int_bits = 12,
- .frac_bits = 8,
- .is_vpu_clock = true,
-};
-
-static const struct bcm2835_clock_data bcm2835_clock_v3d_data = {
- .name = "v3d",
- .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
- .parents = bcm2835_clock_vpu_parents,
- .ctl_reg = CM_V3DCTL,
- .div_reg = CM_V3DDIV,
- .int_bits = 4,
- .frac_bits = 8,
-};
-
-static const struct bcm2835_clock_data bcm2835_clock_isp_data = {
- .name = "isp",
- .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
- .parents = bcm2835_clock_vpu_parents,
- .ctl_reg = CM_ISPCTL,
- .div_reg = CM_ISPDIV,
- .int_bits = 4,
- .frac_bits = 8,
-};
-
-static const struct bcm2835_clock_data bcm2835_clock_h264_data = {
- .name = "h264",
- .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
- .parents = bcm2835_clock_vpu_parents,
- .ctl_reg = CM_H264CTL,
- .div_reg = CM_H264DIV,
- .int_bits = 4,
- .frac_bits = 8,
-};
-
-/* TV encoder clock. Only operating frequency is 108Mhz. */
-static const struct bcm2835_clock_data bcm2835_clock_vec_data = {
- .name = "vec",
- .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
- .parents = bcm2835_clock_per_parents,
- .ctl_reg = CM_VECCTL,
- .div_reg = CM_VECDIV,
- .int_bits = 4,
- .frac_bits = 0,
-};
-
-static const struct bcm2835_clock_data bcm2835_clock_uart_data = {
- .name = "uart",
- .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
- .parents = bcm2835_clock_per_parents,
- .ctl_reg = CM_UARTCTL,
- .div_reg = CM_UARTDIV,
- .int_bits = 10,
- .frac_bits = 12,
-};
-
-/* HDMI state machine */
-static const struct bcm2835_clock_data bcm2835_clock_hsm_data = {
- .name = "hsm",
- .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
- .parents = bcm2835_clock_per_parents,
- .ctl_reg = CM_HSMCTL,
- .div_reg = CM_HSMDIV,
- .int_bits = 4,
- .frac_bits = 8,
-};
-
-/*
- * Secondary SDRAM clock. Used for low-voltage modes when the PLL in
- * the SDRAM controller can't be used.
- */
-static const struct bcm2835_clock_data bcm2835_clock_sdram_data = {
- .name = "sdram",
- .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
- .parents = bcm2835_clock_vpu_parents,
- .ctl_reg = CM_SDCCTL,
- .div_reg = CM_SDCDIV,
- .int_bits = 6,
- .frac_bits = 0,
-};
-
-/* Clock for the temperature sensor. Generally run at 2Mhz, max 5Mhz. */
-static const struct bcm2835_clock_data bcm2835_clock_tsens_data = {
- .name = "tsens",
- .num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),
- .parents = bcm2835_clock_osc_parents,
- .ctl_reg = CM_TSENSCTL,
- .div_reg = CM_TSENSDIV,
- .int_bits = 5,
- .frac_bits = 0,
-};
-
-/* Arasan EMMC clock */
-static const struct bcm2835_clock_data bcm2835_clock_emmc_data = {
- .name = "emmc",
- .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
- .parents = bcm2835_clock_per_parents,
- .ctl_reg = CM_EMMCCTL,
- .div_reg = CM_EMMCDIV,
- .int_bits = 4,
- .frac_bits = 8,
-};
-
-static const struct bcm2835_clock_data bcm2835_clock_pwm_data = {
- .name = "pwm",
- .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
- .parents = bcm2835_clock_per_parents,
- .ctl_reg = CM_PWMCTL,
- .div_reg = CM_PWMDIV,
- .int_bits = 12,
- .frac_bits = 12,
- .is_mash_clock = true,
-};
-
struct bcm2835_gate_data {
const char *name;
const char *parent;
@@ -860,18 +455,6 @@ struct bcm2835_gate_data {
u32 ctl_reg;
};
-/*
- * CM_PERIICTL (and CM_PERIACTL, CM_SYSCTL and CM_VPUCTL if
- * you have the debug bit set in the power manager, which we
- * don't bother exposing) are individual gates off of the
- * non-stop vpu clock.
- */
-static const struct bcm2835_gate_data bcm2835_clock_peri_image_data = {
- .name = "peri_image",
- .parent = "vpu",
- .ctl_reg = CM_PERIICTL,
-};
-
struct bcm2835_pll {
struct clk_hw hw;
struct bcm2835_cprman *cprman;
@@ -1594,7 +1177,7 @@ bcm2835_register_pll_divider(struct bcm2
memset(&init, 0, sizeof(init));
- init.parent_names = &data->source_pll->name;
+ init.parent_names = &data->source_pll;
init.num_parents = 1;
init.name = divider_name;
init.ops = &bcm2835_pll_divider_clk_ops;
@@ -1693,50 +1276,401 @@ struct bcm2835_clk_desc {
const void *data;
};
-#define _REGISTER(f, d) { .clk_register = (bcm2835_clk_register)f, \
- .data = d }
-#define REGISTER_PLL(d) _REGISTER(&bcm2835_register_pll, d)
-#define REGISTER_PLL_DIV(d) _REGISTER(&bcm2835_register_pll_divider, d)
-#define REGISTER_CLK(d) _REGISTER(&bcm2835_register_clock, d)
-#define REGISTER_GATE(d) _REGISTER(&bcm2835_register_gate, d)
+/* assignment helper macros for different clock types */
+#define _REGISTER(f, ...) { .clk_register = (bcm2835_clk_register)f, \
+ .data = __VA_ARGS__ }
+#define REGISTER_PLL(...) _REGISTER(&bcm2835_register_pll, \
+ &(struct bcm2835_pll_data) \
+ {__VA_ARGS__})
+#define REGISTER_PLL_DIV(...) _REGISTER(&bcm2835_register_pll_divider, \
+ &(struct bcm2835_pll_divider_data) \
+ {__VA_ARGS__})
+#define REGISTER_CLK(...) _REGISTER(&bcm2835_register_clock, \
+ &(struct bcm2835_clock_data) \
+ {__VA_ARGS__})
+#define REGISTER_GATE(...) _REGISTER(&bcm2835_register_gate, \
+ &(struct bcm2835_gate_data) \
+ {__VA_ARGS__})
+
+/* parent mux arrays plus helper macros */
+
+/* main oscillator parent mux */
+static const char *const bcm2835_clock_osc_parents[] = {
+ "gnd",
+ "xosc",
+ "testdebug0",
+ "testdebug1"
+};
+
+#define REGISTER_OSC_CLK(...) REGISTER_CLK( \
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents), \
+ .parents = bcm2835_clock_osc_parents, \
+ __VA_ARGS__)
+
+/* main peripherial parent mux */
+static const char *const bcm2835_clock_per_parents[] = {
+ "gnd",
+ "xosc",
+ "testdebug0",
+ "testdebug1",
+ "plla_per",
+ "pllc_per",
+ "plld_per",
+ "pllh_aux",
+};
+
+#define REGISTER_PER_CLK(...) REGISTER_CLK( \
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents), \
+ .parents = bcm2835_clock_per_parents, \
+ __VA_ARGS__)
+
+/* main vpu parent mux */
+static const char *const bcm2835_clock_vpu_parents[] = {
+ "gnd",
+ "xosc",
+ "testdebug0",
+ "testdebug1",
+ "plla_core",
+ "pllc_core0",
+ "plld_core",
+ "pllh_aux",
+ "pllc_core1",
+ "pllc_core2",
+};
+
+#define REGISTER_VPU_CLK(...) REGISTER_CLK( \
+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents), \
+ .parents = bcm2835_clock_vpu_parents, \
+ __VA_ARGS__)
+/*
+ * the real definition of all the pll, pll_dividers and clocks
+ * these make use of the above REGISTER_* macros
+ */
static const struct bcm2835_clk_desc clk_desc_array[] = {
- /* register PLL */
- [BCM2835_PLLA] = REGISTER_PLL(&bcm2835_plla_data),
- [BCM2835_PLLB] = REGISTER_PLL(&bcm2835_pllb_data),
- [BCM2835_PLLC] = REGISTER_PLL(&bcm2835_pllc_data),
- [BCM2835_PLLD] = REGISTER_PLL(&bcm2835_plld_data),
- [BCM2835_PLLH] = REGISTER_PLL(&bcm2835_pllh_data),
- /* the PLL dividers */
- [BCM2835_PLLA_CORE] = REGISTER_PLL_DIV(&bcm2835_plla_core_data),
- [BCM2835_PLLA_PER] = REGISTER_PLL_DIV(&bcm2835_plla_per_data),
- [BCM2835_PLLC_CORE0] = REGISTER_PLL_DIV(&bcm2835_pllc_core0_data),
- [BCM2835_PLLC_CORE1] = REGISTER_PLL_DIV(&bcm2835_pllc_core1_data),
- [BCM2835_PLLC_CORE2] = REGISTER_PLL_DIV(&bcm2835_pllc_core2_data),
- [BCM2835_PLLC_PER] = REGISTER_PLL_DIV(&bcm2835_pllc_per_data),
- [BCM2835_PLLD_CORE] = REGISTER_PLL_DIV(&bcm2835_plld_core_data),
- [BCM2835_PLLD_PER] = REGISTER_PLL_DIV(&bcm2835_plld_per_data),
- [BCM2835_PLLH_RCAL] = REGISTER_PLL_DIV(&bcm2835_pllh_rcal_data),
- [BCM2835_PLLH_AUX] = REGISTER_PLL_DIV(&bcm2835_pllh_aux_data),
- [BCM2835_PLLH_PIX] = REGISTER_PLL_DIV(&bcm2835_pllh_pix_data),
+ /* the PLL + PLL dividers */
+
+ /*
+ * PLLA is the auxiliary PLL, used to drive the CCP2
+ * (Compact Camera Port 2) transmitter clock.
+ *
+ * It is in the PX LDO power domain, which is on when the
+ * AUDIO domain is on.
+ */
+ [BCM2835_PLLA] = REGISTER_PLL(
+ .name = "plla",
+ .cm_ctrl_reg = CM_PLLA,
+ .a2w_ctrl_reg = A2W_PLLA_CTRL,
+ .frac_reg = A2W_PLLA_FRAC,
+ .ana_reg_base = A2W_PLLA_ANA0,
+ .reference_enable_mask = A2W_XOSC_CTRL_PLLA_ENABLE,
+ .lock_mask = CM_LOCK_FLOCKA,
+
+ .ana = &bcm2835_ana_default,
+
+ .min_rate = 600000000u,
+ .max_rate = 2400000000u,
+ .max_fb_rate = BCM2835_MAX_FB_RATE),
+ [BCM2835_PLLA_CORE] = REGISTER_PLL_DIV(
+ .name = "plla_core",
+ .source_pll = "plla",
+ .cm_reg = CM_PLLA,
+ .a2w_reg = A2W_PLLA_CORE,
+ .load_mask = CM_PLLA_LOADCORE,
+ .hold_mask = CM_PLLA_HOLDCORE,
+ .fixed_divider = 1),
+ [BCM2835_PLLA_PER] = REGISTER_PLL_DIV(
+ .name = "plla_per",
+ .source_pll = "plla",
+ .cm_reg = CM_PLLA,
+ .a2w_reg = A2W_PLLA_PER,
+ .load_mask = CM_PLLA_LOADPER,
+ .hold_mask = CM_PLLA_HOLDPER,
+ .fixed_divider = 1),
+
+ /* PLLB is used for the ARM's clock. */
+ [BCM2835_PLLB] = REGISTER_PLL(
+ .name = "pllb",
+ .cm_ctrl_reg = CM_PLLB,
+ .a2w_ctrl_reg = A2W_PLLB_CTRL,
+ .frac_reg = A2W_PLLB_FRAC,
+ .ana_reg_base = A2W_PLLB_ANA0,
+ .reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE,
+ .lock_mask = CM_LOCK_FLOCKB,
+
+ .ana = &bcm2835_ana_default,
+
+ .min_rate = 600000000u,
+ .max_rate = 3000000000u,
+ .max_fb_rate = BCM2835_MAX_FB_RATE),
+ [BCM2835_PLLB_ARM] = REGISTER_PLL_DIV(
+ .name = "pllb_arm",
+ .source_pll = "pllb",
+ .cm_reg = CM_PLLB,
+ .a2w_reg = A2W_PLLB_ARM,
+ .load_mask = CM_PLLB_LOADARM,
+ .hold_mask = CM_PLLB_HOLDARM,
+ .fixed_divider = 1),
+
+ /*
+ * PLLC is the core PLL, used to drive the core VPU clock.
+ *
+ * It is in the PX LDO power domain, which is on when the
+ * AUDIO domain is on.
+ */
+ [BCM2835_PLLC] = REGISTER_PLL(
+ .name = "pllc",
+ .cm_ctrl_reg = CM_PLLC,
+ .a2w_ctrl_reg = A2W_PLLC_CTRL,
+ .frac_reg = A2W_PLLC_FRAC,
+ .ana_reg_base = A2W_PLLC_ANA0,
+ .reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE,
+ .lock_mask = CM_LOCK_FLOCKC,
+
+ .ana = &bcm2835_ana_default,
+
+ .min_rate = 600000000u,
+ .max_rate = 3000000000u,
+ .max_fb_rate = BCM2835_MAX_FB_RATE),
+ [BCM2835_PLLC_CORE0] = REGISTER_PLL_DIV(
+ .name = "pllc_core0",
+ .source_pll = "pllc",
+ .cm_reg = CM_PLLC,
+ .a2w_reg = A2W_PLLC_CORE0,
+ .load_mask = CM_PLLC_LOADCORE0,
+ .hold_mask = CM_PLLC_HOLDCORE0,
+ .fixed_divider = 1),
+ [BCM2835_PLLC_CORE1] = REGISTER_PLL_DIV(
+ .name = "pllc_core1",
+ .source_pll = "pllc",
+ .cm_reg = CM_PLLC,
+ .a2w_reg = A2W_PLLC_CORE1,
+ .load_mask = CM_PLLC_LOADCORE1,
+ .hold_mask = CM_PLLC_HOLDCORE1,
+ .fixed_divider = 1),
+ [BCM2835_PLLC_CORE2] = REGISTER_PLL_DIV(
+ .name = "pllc_core2",
+ .source_pll = "pllc",
+ .cm_reg = CM_PLLC,
+ .a2w_reg = A2W_PLLC_CORE2,
+ .load_mask = CM_PLLC_LOADCORE2,
+ .hold_mask = CM_PLLC_HOLDCORE2,
+ .fixed_divider = 1),
+ [BCM2835_PLLC_PER] = REGISTER_PLL_DIV(
+ .name = "pllc_per",
+ .source_pll = "pllc",
+ .cm_reg = CM_PLLC,
+ .a2w_reg = A2W_PLLC_PER,
+ .load_mask = CM_PLLC_LOADPER,
+ .hold_mask = CM_PLLC_HOLDPER,
+ .fixed_divider = 1),
+
+ /*
+ * PLLD is the display PLL, used to drive DSI display panels.
+ *
+ * It is in the PX LDO power domain, which is on when the
+ * AUDIO domain is on.
+ */
+ [BCM2835_PLLD] = REGISTER_PLL(
+ .name = "plld",
+ .cm_ctrl_reg = CM_PLLD,
+ .a2w_ctrl_reg = A2W_PLLD_CTRL,
+ .frac_reg = A2W_PLLD_FRAC,
+ .ana_reg_base = A2W_PLLD_ANA0,
+ .reference_enable_mask = A2W_XOSC_CTRL_DDR_ENABLE,
+ .lock_mask = CM_LOCK_FLOCKD,
+
+ .ana = &bcm2835_ana_default,
+
+ .min_rate = 600000000u,
+ .max_rate = 2400000000u,
+ .max_fb_rate = BCM2835_MAX_FB_RATE),
+ [BCM2835_PLLD_CORE] = REGISTER_PLL_DIV(
+ .name = "plld_core",
+ .source_pll = "plld",
+ .cm_reg = CM_PLLD,
+ .a2w_reg = A2W_PLLD_CORE,
+ .load_mask = CM_PLLD_LOADCORE,
+ .hold_mask = CM_PLLD_HOLDCORE,
+ .fixed_divider = 1),
+ [BCM2835_PLLD_PER] = REGISTER_PLL_DIV(
+ .name = "plld_per",
+ .source_pll = "plld",
+ .cm_reg = CM_PLLD,
+ .a2w_reg = A2W_PLLD_PER,
+ .load_mask = CM_PLLD_LOADPER,
+ .hold_mask = CM_PLLD_HOLDPER,
+ .fixed_divider = 1),
+
+ /*
+ * PLLH is used to supply the pixel clock or the AUX clock for the
+ * TV encoder.
+ *
+ * It is in the HDMI power domain.
+ */
+ [BCM2835_PLLH] = REGISTER_PLL(
+ "pllh",
+ .cm_ctrl_reg = CM_PLLH,
+ .a2w_ctrl_reg = A2W_PLLH_CTRL,
+ .frac_reg = A2W_PLLH_FRAC,
+ .ana_reg_base = A2W_PLLH_ANA0,
+ .reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE,
+ .lock_mask = CM_LOCK_FLOCKH,
+
+ .ana = &bcm2835_ana_pllh,
+
+ .min_rate = 600000000u,
+ .max_rate = 3000000000u,
+ .max_fb_rate = BCM2835_MAX_FB_RATE),
+ [BCM2835_PLLH_RCAL] = REGISTER_PLL_DIV(
+ .name = "pllh_rcal",
+ .source_pll = "pllh",
+ .cm_reg = CM_PLLH,
+ .a2w_reg = A2W_PLLH_RCAL,
+ .load_mask = CM_PLLH_LOADRCAL,
+ .hold_mask = 0,
+ .fixed_divider = 10),
+ [BCM2835_PLLH_AUX] = REGISTER_PLL_DIV(
+ .name = "pllh_aux",
+ .source_pll = "pllh",
+ .cm_reg = CM_PLLH,
+ .a2w_reg = A2W_PLLH_AUX,
+ .load_mask = CM_PLLH_LOADAUX,
+ .hold_mask = 0,
+ .fixed_divider = 10),
+ [BCM2835_PLLH_PIX] = REGISTER_PLL_DIV(
+ .name = "pllh_pix",
+ .source_pll = "pllh",
+ .cm_reg = CM_PLLH,
+ .a2w_reg = A2W_PLLH_PIX,
+ .load_mask = CM_PLLH_LOADPIX,
+ .hold_mask = 0,
+ .fixed_divider = 10),
+
/* the clocks */
- [BCM2835_CLOCK_TIMER] = REGISTER_CLK(&bcm2835_clock_timer_data),
- [BCM2835_CLOCK_OTP] = REGISTER_CLK(&bcm2835_clock_otp_data),
- [BCM2835_CLOCK_TSENS] = REGISTER_CLK(&bcm2835_clock_tsens_data),
- [BCM2835_CLOCK_VPU] = REGISTER_CLK(&bcm2835_clock_vpu_data),
- [BCM2835_CLOCK_V3D] = REGISTER_CLK(&bcm2835_clock_v3d_data),
- [BCM2835_CLOCK_ISP] = REGISTER_CLK(&bcm2835_clock_isp_data),
- [BCM2835_CLOCK_H264] = REGISTER_CLK(&bcm2835_clock_h264_data),
- [BCM2835_CLOCK_V3D] = REGISTER_CLK(&bcm2835_clock_v3d_data),
- [BCM2835_CLOCK_SDRAM] = REGISTER_CLK(&bcm2835_clock_sdram_data),
- [BCM2835_CLOCK_UART] = REGISTER_CLK(&bcm2835_clock_uart_data),
- [BCM2835_CLOCK_VEC] = REGISTER_CLK(&bcm2835_clock_vec_data),
- [BCM2835_CLOCK_HSM] = REGISTER_CLK(&bcm2835_clock_hsm_data),
- [BCM2835_CLOCK_EMMC] = REGISTER_CLK(&bcm2835_clock_emmc_data),
- [BCM2835_CLOCK_PWM] = REGISTER_CLK(&bcm2835_clock_pwm_data),
+
+ /* clocks with oscillator parent mux */
+
+ /* One Time Programmable Memory clock. Maximum 10Mhz. */
+ [BCM2835_CLOCK_OTP] = REGISTER_OSC_CLK(
+ .name = "otp",
+ .ctl_reg = CM_OTPCTL,
+ .div_reg = CM_OTPDIV,
+ .int_bits = 4,
+ .frac_bits = 0),
+ /*
+ * Used for a 1Mhz clock for the system clocksource, and also used
+ * bythe watchdog timer and the camera pulse generator.
+ */
+ [BCM2835_CLOCK_TIMER] = REGISTER_OSC_CLK(
+ .name = "timer",
+ .ctl_reg = CM_TIMERCTL,
+ .div_reg = CM_TIMERDIV,
+ .int_bits = 6,
+ .frac_bits = 12),
+ /*
+ * Clock for the temperature sensor.
+ * Generally run at 2Mhz, max 5Mhz.
+ */
+ [BCM2835_CLOCK_TSENS] = REGISTER_OSC_CLK(
+ .name = "tsens",
+ .ctl_reg = CM_TSENSCTL,
+ .div_reg = CM_TSENSDIV,
+ .int_bits = 5,
+ .frac_bits = 0),
+
+ /* clocks with vpu parent mux */
+ [BCM2835_CLOCK_H264] = REGISTER_VPU_CLK(
+ .name = "h264",
+ .ctl_reg = CM_H264CTL,
+ .div_reg = CM_H264DIV,
+ .int_bits = 4,
+ .frac_bits = 8),
+ [BCM2835_CLOCK_ISP] = REGISTER_VPU_CLK(
+ .name = "isp",
+ .ctl_reg = CM_ISPCTL,
+ .div_reg = CM_ISPDIV,
+ .int_bits = 4,
+ .frac_bits = 8),
+ /*
+ * Secondary SDRAM clock. Used for low-voltage modes when the PLL
+ * in the SDRAM controller can't be used.
+ */
+ [BCM2835_CLOCK_SDRAM] = REGISTER_VPU_CLK(
+ .name = "sdram",
+ .ctl_reg = CM_SDCCTL,
+ .div_reg = CM_SDCDIV,
+ .int_bits = 6,
+ .frac_bits = 0),
+ [BCM2835_CLOCK_V3D] = REGISTER_VPU_CLK(
+ .name = "v3d",
+ .ctl_reg = CM_V3DCTL,
+ .div_reg = CM_V3DDIV,
+ .int_bits = 4,
+ .frac_bits = 8),
+ /*
+ * VPU clock. This doesn't have an enable bit, since it drives
+ * the bus for everything else, and is special so it doesn't need
+ * to be gated for rate changes. It is also known as "clk_audio"
+ * in various hardware documentation.
+ */
+ [BCM2835_CLOCK_VPU] = REGISTER_VPU_CLK(
+ .name = "vpu",
+ .ctl_reg = CM_VPUCTL,
+ .div_reg = CM_VPUDIV,
+ .int_bits = 12,
+ .frac_bits = 8,
+ .is_vpu_clock = true),
+
+ /* clocks with per parent mux */
+
+ /* Arasan EMMC clock */
+ [BCM2835_CLOCK_EMMC] = REGISTER_PER_CLK(
+ .name = "emmc",
+ .ctl_reg = CM_EMMCCTL,
+ .div_reg = CM_EMMCDIV,
+ .int_bits = 4,
+ .frac_bits = 8),
+ /* HDMI state machine */
+ [BCM2835_CLOCK_HSM] = REGISTER_PER_CLK(
+ .name = "hsm",
+ .ctl_reg = CM_HSMCTL,
+ .div_reg = CM_HSMDIV,
+ .int_bits = 4,
+ .frac_bits = 8),
+ [BCM2835_CLOCK_PWM] = REGISTER_PER_CLK(
+ .name = "pwm",
+ .ctl_reg = CM_PWMCTL,
+ .div_reg = CM_PWMDIV,
+ .int_bits = 12,
+ .frac_bits = 12,
+ .is_mash_clock = true),
+ [BCM2835_CLOCK_UART] = REGISTER_PER_CLK(
+ .name = "uart",
+ .ctl_reg = CM_UARTCTL,
+ .div_reg = CM_UARTDIV,
+ .int_bits = 10,
+ .frac_bits = 12),
+ /* TV encoder clock. Only operating frequency is 108Mhz. */
+ [BCM2835_CLOCK_VEC] = REGISTER_PER_CLK(
+ .name = "vec",
+ .ctl_reg = CM_VECCTL,
+ .div_reg = CM_VECDIV,
+ .int_bits = 4,
+ .frac_bits = 0),
+
/* the gates */
+
+ /*
+ * CM_PERIICTL (and CM_PERIACTL, CM_SYSCTL and CM_VPUCTL if
+ * you have the debug bit set in the power manager, which we
+ * don't bother exposing) are individual gates off of the
+ * non-stop vpu clock.
+ */
[BCM2835_CLOCK_PERI_IMAGE] = REGISTER_GATE(
- &bcm2835_clock_peri_image_data),
+ .name = "peri_image",
+ .parent = "vpu",
+ .ctl_reg = CM_PERIICTL),
};
static int bcm2835_clk_probe(struct platform_device *pdev)