openwrt/target/linux/ramips/dts/RT-N13U.dts

105 lines
1.6 KiB
Plaintext

/dts-v1/;
/include/ "rt3050.dtsi"
/ {
compatible = "RT-N13U", "ralink,rt3052-soc";
model = "Asus RT-N13U";
palmbus@10000000 {
sysc@0 {
ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "rt-n13u:power";
gpios = <&gpio0 7 1>;
};
wifi {
label = "rt-n13u:wifi";
gpios = <&gpio0 8 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <10>;
reset {
label = "reset";
gpios = <&gpio0 4 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio0 10 1>;
linux,code = <0x211>;
};
rfkill {
label = "rfkill";
gpios = <&gpio0 0 1>;
linux,code = <0xf7>;
};
};
ethernet@10100000 {
status = "okay";
};
esw@10110000 {
status = "okay";
ralink,portmap = <0x2f>;
};
wmac@10180000 {
status = "okay";
};
otg@101c0000 {
status = "okay";
};
};