openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Felix Fietkau 658fcd6cf3 wlcompat: show wet mode as Managed mode as well to avoid confusion SVN-Revision: 9529		2007-11-10 19:01:00 +00:00
docs	Document the IPv6 connectivity with OpenWrt.	2007-10-26 16:21:03 +00:00
include	fix parallel build issues	2007-11-04 11:42:47 +00:00
package	wlcompat: show wet mode as Managed mode as well to avoid confusion	2007-11-10 19:01:00 +00:00
scripts	add config symbols for the kernel version	2007-11-10 15:22:53 +00:00
target	disable pci ide irq sharing by default - probably causes issues on alix (unconfirmed)	2007-11-10 18:04:17 +00:00
toolchain	revert abi changes in uClibc - on hold for 7.11, will be added again with the uclibc upgrade for 8.01	2007-11-09 13:20:21 +00:00
tools	fix some definitions in the ZyXEL tool	2007-11-03 17:00:57 +00:00
.gitignore	add package/feeds to .gitignore	2007-10-13 02:05:06 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	add possibility to set default .config values	2007-10-14 02:15:37 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	fix parallel build issues	2007-11-04 11:42:47 +00:00
README	add information about the tex4ht requirement for the docs	2007-02-26 01:06:41 +00:00
feeds.conf	add initial version of a package feeds management script	2007-09-23 02:39:01 +00:00
rules.mk	add config symbols for the kernel version	2007-11-10 15:22:53 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org