mirror of https://github.com/hak5/openwrt.git
144 lines
4.3 KiB
Diff
144 lines
4.3 KiB
Diff
From: Alexander Lobakin <bloodyreaper@yandex.ru>
|
|
Date: Tue, 21 Apr 2020 16:41:08 +0300
|
|
Subject: [PATCH] net: dsa: add GRO support via gro_cells
|
|
|
|
gro_cells lib is used by different encapsulating netdevices, such as
|
|
geneve, macsec, vxlan etc. to speed up decapsulated traffic processing.
|
|
CPU tag is a sort of "encapsulation", and we can use the same mechs to
|
|
greatly improve overall DSA performance.
|
|
skbs are passed to the GRO layer after removing CPU tags, so we don't
|
|
need any new packet offload types as it was firstly proposed by me in
|
|
the first GRO-over-DSA variant [1].
|
|
|
|
The size of struct gro_cells is sizeof(void *), so hot struct
|
|
dsa_slave_priv becomes only 4/8 bytes bigger, and all critical fields
|
|
remain in one 32-byte cacheline.
|
|
The other positive side effect is that drivers for network devices
|
|
that can be shipped as CPU ports of DSA-driven switches can now use
|
|
napi_gro_frags() to pass skbs to kernel. Packets built that way are
|
|
completely non-linear and are likely being dropped without GRO.
|
|
|
|
This was tested on to-be-mainlined-soon Ethernet driver that uses
|
|
napi_gro_frags(), and the overall performance was on par with the
|
|
variant from [1], sometimes even better due to minimal overhead.
|
|
net.core.gro_normal_batch tuning may help to push it to the limit
|
|
on particular setups and platforms.
|
|
|
|
iperf3 IPoE VLAN NAT TCP forwarding (port1.218 -> port0) setup
|
|
on 1.2 GHz MIPS board:
|
|
|
|
5.7-rc2 baseline:
|
|
|
|
[ID] Interval Transfer Bitrate Retr
|
|
[ 5] 0.00-120.01 sec 9.00 GBytes 644 Mbits/sec 413 sender
|
|
[ 5] 0.00-120.00 sec 8.99 GBytes 644 Mbits/sec receiver
|
|
|
|
Iface RX packets TX packets
|
|
eth0 7097731 7097702
|
|
port0 426050 6671829
|
|
port1 6671681 425862
|
|
port1.218 6671677 425851
|
|
|
|
With this patch:
|
|
|
|
[ID] Interval Transfer Bitrate Retr
|
|
[ 5] 0.00-120.01 sec 12.2 GBytes 870 Mbits/sec 122 sender
|
|
[ 5] 0.00-120.00 sec 12.2 GBytes 870 Mbits/sec receiver
|
|
|
|
Iface RX packets TX packets
|
|
eth0 9474792 9474777
|
|
port0 455200 353288
|
|
port1 9019592 455035
|
|
port1.218 353144 455024
|
|
|
|
v2:
|
|
- Add some performance examples in the commit message;
|
|
- No functional changes.
|
|
|
|
[1] https://lore.kernel.org/netdev/20191230143028.27313-1-alobakin@dlink.ru/
|
|
|
|
Signed-off-by: Alexander Lobakin <bloodyreaper@yandex.ru>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
|
|
--- a/net/dsa/Kconfig
|
|
+++ b/net/dsa/Kconfig
|
|
@@ -9,6 +9,7 @@ menuconfig NET_DSA
|
|
tristate "Distributed Switch Architecture"
|
|
depends on HAVE_NET_DSA
|
|
depends on BRIDGE || BRIDGE=n
|
|
+ select GRO_CELLS
|
|
select NET_SWITCHDEV
|
|
select PHYLINK
|
|
select NET_DEVLINK
|
|
--- a/net/dsa/dsa.c
|
|
+++ b/net/dsa/dsa.c
|
|
@@ -238,7 +238,7 @@ static int dsa_switch_rcv(struct sk_buff
|
|
if (dsa_skb_defer_rx_timestamp(p, skb))
|
|
return 0;
|
|
|
|
- netif_receive_skb(skb);
|
|
+ gro_cells_receive(&p->gcells, skb);
|
|
|
|
return 0;
|
|
}
|
|
--- a/net/dsa/dsa_priv.h
|
|
+++ b/net/dsa/dsa_priv.h
|
|
@@ -11,6 +11,7 @@
|
|
#include <linux/netdevice.h>
|
|
#include <linux/netpoll.h>
|
|
#include <net/dsa.h>
|
|
+#include <net/gro_cells.h>
|
|
|
|
enum {
|
|
DSA_NOTIFIER_AGEING_TIME,
|
|
@@ -68,6 +69,8 @@ struct dsa_slave_priv {
|
|
|
|
struct pcpu_sw_netstats *stats64;
|
|
|
|
+ struct gro_cells gcells;
|
|
+
|
|
/* DSA port data, such as switch, port index, etc. */
|
|
struct dsa_port *dp;
|
|
|
|
--- a/net/dsa/slave.c
|
|
+++ b/net/dsa/slave.c
|
|
@@ -1431,6 +1431,11 @@ int dsa_slave_create(struct dsa_port *po
|
|
free_netdev(slave_dev);
|
|
return -ENOMEM;
|
|
}
|
|
+
|
|
+ ret = gro_cells_init(&p->gcells, slave_dev);
|
|
+ if (ret)
|
|
+ goto out_free;
|
|
+
|
|
p->dp = port;
|
|
INIT_LIST_HEAD(&p->mall_tc_list);
|
|
INIT_WORK(&port->xmit_work, dsa_port_xmit_work);
|
|
@@ -1443,7 +1448,7 @@ int dsa_slave_create(struct dsa_port *po
|
|
ret = dsa_slave_phy_setup(slave_dev);
|
|
if (ret) {
|
|
netdev_err(master, "error %d setting up slave phy\n", ret);
|
|
- goto out_free;
|
|
+ goto out_gcells;
|
|
}
|
|
|
|
dsa_slave_notify(slave_dev, DSA_PORT_REGISTER);
|
|
@@ -1462,6 +1467,8 @@ out_phy:
|
|
phylink_disconnect_phy(p->dp->pl);
|
|
rtnl_unlock();
|
|
phylink_destroy(p->dp->pl);
|
|
+out_gcells:
|
|
+ gro_cells_destroy(&p->gcells);
|
|
out_free:
|
|
free_percpu(p->stats64);
|
|
free_netdev(slave_dev);
|
|
@@ -1482,6 +1489,7 @@ void dsa_slave_destroy(struct net_device
|
|
dsa_slave_notify(slave_dev, DSA_PORT_UNREGISTER);
|
|
unregister_netdev(slave_dev);
|
|
phylink_destroy(dp->pl);
|
|
+ gro_cells_destroy(&p->gcells);
|
|
free_percpu(p->stats64);
|
|
free_netdev(slave_dev);
|
|
}
|