Daniel Dickinson 0c0c1f017f image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. ... SVN-Revision: 24118		2010-11-23 20:17:08 +00:00
..
base-files	base-files: diag.sh: For power button as preinit status led, end with led left on, not off	2010-08-02 19:33:08 +00:00
files/arch/mips/include/asm/mach-bcm63xx	tools/firmware-utils/imagetag: Fixed Pirelli Alice Gate CRC calculation in imagetag (was invalid strings in bcm_tag.h). Closes #7120	2010-04-14 00:45:48 +00:00
image	image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used.	2010-11-23 20:17:08 +00:00
patches-2.6.35	Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO led/buttons not known).	2010-11-19 13:41:54 +00:00
profiles	remove wpa-supplicant and iw from the Tecom GW6x00 profile	2010-09-13 08:30:35 +00:00
Makefile	update kernels to 2.6.32.25 and 2.6.35.8	2010-11-04 09:01:08 +00:00
config-2.6.35	restore kernel oldconfig	2010-10-17 14:09:24 +00:00
modules.mk	massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950	2010-07-12 14:06:13 +00:00