openwrt/package
Felix Fietkau 6488abc11c ppp: derive interface unit numbers from previous enumeration
SVN-Revision: 12417
2008-08-28 00:15:10 +00:00
..
acx acx: fix firmware download URL 2008-07-14 10:23:36 +00:00
acx-mac80211 acx: fix firmware download URL 2008-07-14 10:23:36 +00:00
admswconfig fix a bug causing the init script to fail and incorrect number of lan ports 2008-03-20 20:11:21 +00:00
ar7-atm ar7-atm: patch was against an older tarball, fixear7-atm: patch was against an older tarball, fixedd 2008-03-11 17:39:54 +00:00
arptables arptables: Update to 0.0.3-3 2008-06-22 18:40:30 +00:00
ath9k disable ath9k on all platforms without pci support, not just uml 2008-08-20 15:46:46 +00:00
b43 Update b43 to work in AP mode 2008-08-13 19:37:40 +00:00
base-files fixes broken if-then in led init script 2008-08-27 20:33:13 +00:00
br2684ctl switch the br2684 default to routed mode instead of bridged mode, as it's more common 2008-08-11 13:02:44 +00:00
bridge-utils Fix bridge-utils configuration failure (#3931), thanks sn9 2008-08-25 10:06:25 +00:00
broadcom-57xx remove some unused crap 2008-06-15 11:15:35 +00:00
broadcom-diag broadcom-diag: reset the interrupt mask of configured leds to avoid spurious interrupts 2008-07-31 01:33:14 +00:00
broadcom-mmc DESCRIPTION:= is obselete 2007-10-14 04:46:38 +00:00
broadcom-wl add vif selection fix for the broadcom-wl wifi script (thx, sn9) 2008-08-16 17:00:27 +00:00
busybox fix busybox compile on mac os x 2008-08-27 19:35:47 +00:00
button-hotplug button-hotplug: fix compile warnings 2008-07-26 16:32:12 +00:00
comgt This series of patches closes the support gap on one of the explicitly supported platforms (WRT54G3G) by adding direct support for the Sierra Wireless 3G modems. Signed-off-by: RB <aoz.syn@gmail.com> 2008-07-21 20:36:16 +00:00
dnsmasq add section names to dnsmasq config 2008-08-19 22:05:41 +00:00
dropbear make opkg the default package manager, disable busybox ipkg from building by default 2008-08-16 06:35:14 +00:00
e2fsprogs add a patch to use relative symlinks for development shared libraries 2008-08-20 16:01:33 +00:00
ebtables ebtables: useless without kmod-eptables 2008-08-06 15:28:49 +00:00
fconfig move the fconfig package into trunk 2008-05-27 13:21:12 +00:00
firewall make uci firewall backwards compatible to the old firewall.user 2008-08-27 19:16:54 +00:00
fuse fix fuse: use in-kernel module for 2.6.25+ kernels 2008-05-11 22:27:32 +00:00
gdbserver Use $(CP) instead of $(INSTALL_BIN) for binaries. 2007-12-09 18:53:06 +00:00
gpioctl more use of the new GPIO_SUPPORT option 2008-05-02 00:30:39 +00:00
grub make grub compilable under fedora core 8 and other newer distros 2008-08-02 15:15:33 +00:00
hostap-driver push a couple of fixes upstream from Acinonyx 2008-02-15 00:33:31 +00:00
hostap-utils replace common -I and -L search flags with TARGET_CPPFLAGS and TARGET_LDFLAGS 2007-03-28 00:35:26 +00:00
hostapd A WPA(2) pre-shared key can either be specified as a 8 to 63 character passphrase which is hashed to a 256 bit key together with the SSID, or a 64 character hex key. Currently, the latter option is supported by the broadcom wifi type, but no by hostapd. The attached patch allows using a 64 character hex key. (#3935) 2008-08-26 17:19:00 +00:00
hotplug2 remove warning from hotplug2, which pops up 10 times during boot 2008-08-04 08:04:16 +00:00
i2c-gpio-custom i2c-gpio-custom: minor bugfix 2008-08-13 18:48:48 +00:00
ifenslave move package description to a separate definition, remove it when DESCRIPTION=TITLE 2007-09-07 08:34:51 +00:00
ipkg use $(FPIC) in a few places where it matters 2008-08-06 22:10:29 +00:00
iproute2 package iproute2 has problems building on recent BSD-derived platforms because some programs to be run on the host use malloc.h in an incompatible way. 2008-08-08 21:49:17 +00:00
ipset mark ipset as 2.6 only 2007-10-20 20:03:52 +00:00
iptables use $(FPIC) in a few places where it matters 2008-08-06 22:10:29 +00:00
iw enable iw for all 2.6 versions 2008-07-31 02:43:42 +00:00
ixp4xx-microcode switch to a different NPE-C firmware 2008-07-12 16:28:50 +00:00
kernel fix the CF driver on 2.6.26.x, and create a package for it 2008-08-21 16:52:06 +00:00
kexec-tools kexec for powerpc actually only support ps3 or gamecube, not magicbox for instance 2008-08-06 20:20:02 +00:00
libertas Updating libertas wireless driver to latest version. 2008-01-24 03:03:04 +00:00
libnl use $(FPIC) in a few places where it matters 2008-08-06 22:10:29 +00:00
libpcap use $(FPIC) in a few places where it matters 2008-08-06 22:10:29 +00:00
libtool patch Makefile.am for GLOBAL_LIBDIR as well 2007-12-28 16:48:15 +00:00
linux-atm remove uninstalldev templates (no longer necessary) 2007-12-25 01:40:47 +00:00
lua Updated Lua to 5.1.4 2008-08-24 15:45:26 +00:00
mac80211 This patch enables the new ath5k driver. Works for me with X86 Alix board an AR2413 minipci card. iw and iwconfig works. 2008-08-27 14:09:29 +00:00
madwifi madwifi: keep a/g mode and pureg setting in sync across vaps 2008-08-21 14:54:51 +00:00
mmc_over_gpio Update gpiommc to use configfs 2008-07-20 19:34:09 +00:00
mtd add support for appending a file to jffs2 during reflash on the fly 2008-08-08 22:43:19 +00:00
ncurses use $(FPIC) in a few places where it matters 2008-08-06 22:10:29 +00:00
nozomi move package description to a separate definition, remove it when DESCRIPTION=TITLE 2007-09-07 08:34:51 +00:00
nvram use $(FPIC) in a few places where it matters 2008-08-06 22:10:29 +00:00
openssl adds several fixes to etrax, make openssl work on etrax 2008-08-26 11:36:06 +00:00
opkg remove unneeded line 2008-08-16 16:46:11 +00:00
p54 remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long) 2008-05-26 22:57:51 +00:00
pcmcia-cs Use $(CP) instead of $(INSTALL_BIN) for binaries. 2007-12-09 18:53:06 +00:00
ppp ppp: derive interface unit numbers from previous enumeration 2008-08-28 00:15:10 +00:00
pptp ppp/pptp fixes: - prevent ppp from logging to /etc/ppp/connect-errors (closes: #2989) - add dependency on ppp and kmod-gre to pptp - bump release number 2008-05-03 12:11:35 +00:00
ps3-utils add ps3-dump-bootloader to package install 2008-05-05 21:49:24 +00:00
qos-scripts Load xt_layer7 for 2.6 kernels (#3269) 2008-03-27 14:47:54 +00:00
robocfg move package description to a separate definition, remove it when DESCRIPTION=TITLE 2007-09-07 08:34:51 +00:00
rt61 Mark rt61 as 2.6.23 only (#3337) 2008-04-17 17:11:34 +00:00
rt2500 remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long) 2008-05-26 22:57:51 +00:00
rt2570 move package description to a separate definition, remove it when DESCRIPTION=TITLE 2007-09-07 08:34:51 +00:00
spi-ks8995 fixes ipkg dependency bug for spi modules, #3272 2008-07-30 00:27:21 +00:00
switch (4/6) bcm57xx: switch-core.c/switch-robo.c check for port already registered 2008-06-15 11:10:27 +00:00
uboot-ifxmips fix uboot-ifxmips compile on mac os x 2008-08-27 21:02:01 +00:00
ubsec_ssb ubsec ssb is only available on brcm47xx 2008-07-16 10:15:12 +00:00
uci upgrade to uci 0.6.1 - lots of cli and lua binding fixes 2008-08-27 21:16:20 +00:00
udev add missing udevextras package option - edd_id 2008-05-05 21:58:03 +00:00
util-linux-ng add missing dependencies on libblkid/libuuid for mount-utils/swap-utils (should close: #3730), bump release number 2008-08-20 16:04:21 +00:00
w1-gpio-custom import w1-gpio-custom driver from the Squidge (http://squidge.sourceforge.net/) project 2008-04-29 18:31:43 +00:00
wireless-tools package shared library as well (partially closes: #3030) 2008-04-14 02:06:35 +00:00
wpa_supplicant Fix a bug when parsing ca_cert and eap_type with wpa_supplicant, this should only be set for 802.1x setups 2008-08-13 13:30:27 +00:00
wrt55agv2-spidevs use the spi-ks8995 driver on the WRT55AG v2 boards 2008-04-17 13:12:57 +00:00
yamonenv major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets 2007-09-08 19:55:42 +00:00
zlib use $(FPIC) in a few places where it matters 2008-08-06 22:10:29 +00:00
Makefile Generate gzipped package lists - Can be used by changing the src line in /etc/ipkg.conf to src/gz - Cannot be used by busybox ipkg 2008-07-29 03:36:11 +00:00