openwrt/target/linux/ramips/dts/WNDR3700V5.dts

138 lines
2.1 KiB
Plaintext

/dts-v1/;
#include "mt7621.dtsi"
/ {
compatible = "mediatek,mt7621-eval-board","ralink,mt7621-soc";
model = "Netgear WNDR3700v5";
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
chosen {
bootargs = "console=ttyS0,57600 maxcpus=2";
};
gpio-leds {
compatible = "gpio-leds";
wps {
label = "wndr3700v5:green:wps";
gpios = <&gpio0 12 1>;
};
power {
label = "wndr3700v5:green:power";
gpios = <&gpio0 18 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
wps {
label = "wndr3700v5:wps";
gpios = <&gpio0 7 0>;
linux,code = <0x211>;
};
wifi {
label = "wndr3700v5:wifi";
gpios = <&gpio0 8 0>;
linux,code = <0xf7>;
};
reset {
label = "wndr3700v5:reset";
gpios = <&gpio0 14 0>;
linux,code = <0x198>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usbpower {
gpio-export,name = "usbpower";
gpio-export,output = <1>;
gpios = <&gpio0 10 1>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l12805d";
reg = <0>;
linux,modalias = "m25p80", "w25q128";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@f30000 {
label = "factory";
reg = <0xf30000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
&pcie {
status = "okay";
pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x0004>;
mediatek,2ghz = <0>;
};
};
pcie2 {
mt76@2,0 {
reg = <0x1000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x8004>;
mediatek,5ghz = <0>;
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x0000000c>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "rgmii2", "mdio", "wdt";
ralink,function = "gpio";
};
};
};