openwrt/package/ifx-tapidemo/files/bringup_tapidemo

90 lines
1.8 KiB
Bash

#!/bin/sh /etc/rc.common
# (C) 2008 openwrt.org
START=96
[ ! -f /dev/vmmc10 ] && {
mknod /dev/vmmc10 c 122 10
mknod /dev/vmmc11 c 122 11
mknod /dev/vmmc12 c 122 12
mknod /dev/vmmc13 c 122 13
mknod /dev/vmmc14 c 122 14
mknod /dev/vmmc15 c 122 15
mknod /dev/vmmc16 c 122 16
mknod /dev/vmmc17 c 122 17
mknod /dev/vmmc18 c 122 18
}
TD_EXTRA_FLAGS_FXO=
TD_EXTRA_FLAGS_KPI2UDP=
TD_DOWNLOAD_PATH=/lib/firmware/
DEV_NODE_TERIDIAN=ter10
# Show help
help()
{
echo "Usage:"
echo " - $0 WAN-IF-NAME - start TAPIDEMO without FXO support"
echo " - $0 WAN-IF-NAME fxo - start TAPIDEMO with FXO support."
echo " - $0 stop - stop TAPIDEMO"
}
# Check if device node for Teridian exists
checkFxoSupport()
{
if [ ! -e /dev/$DEV_NODE_TERIDIAN ];then
echo "FXO support is disabled. Can not find required driver's device node."
else
TD_EXTRA_FLAGS_FXO="-x"
fi
}
# Check if module drv_kpi2udp is loaded
checkKpi2UdpSupport()
{
tmp=`cat /proc/modules | grep 'drv_kpi2udp '`
if [ "$tmp" != "" ]; then
TD_EXTRA_FLAGS_KPI2UDP="-q"
fi
}
start()
{
TD_WANIF=$1
TD_WANIF_IP=`ifconfig $TD_WANIF | grep 'inet addr:' | cut -f2 -d: | cut -f1 -d' '`
if [ "$TD_WANIF_IP" = "" ]; then
echo "Error, getting IP address for network device $TD_WANIF failed."
exit 1
fi
if [ "$2" = "" ];then
# FXO support is disabled.
continue
elif [ "$2" = "fxo" ];then
checkFxoSupport
else
echo "Error, unknown second parameter."
help
exit 1
fi
checkKpi2UdpSupport
if [ -r /etc/rc.conf ]; then
. /etc/rc.conf
fi
TD_DEBUG_LEVEL=$tapiDebugLevel
if [ "$TD_DEBUG_LEVEL" = "" ]; then
TD_DEBUG_LEVEL=3
fi
/usr/sbin/tapidemo -d $TD_DEBUG_LEVEL $TD_EXTRA_FLAGS_FXO $TD_EXTRA_FLAGS_KPI2UDP -i $TD_WANIF_IP -l $TD_DOWNLOAD_PATH &
}
stop()
{
killall tapidemo > /dev/null 2> /dev/null
}