openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Gabor Juhos 5d8a7a0ce5 Make teql hotplug script run sooner In particular, it wants to run before the ntpclient script. Which may block for a long time attempting to do DNS lookups for NTP servers. In my case, that would have worked if the new device had been added to teql first, rather than timing out. This was effectively causing a huge delay between an interface coming up, and routing actually starting to work. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34442		2012-12-02 13:04:03 +00:00
docs	update switch documentation	2012-10-12 12:13:56 +00:00
include	build: Add TARGET_ROOTFS_RESERVED_PCT option to reduce wasted space	2012-11-29 17:37:15 +00:00
package	Make teql hotplug script run sooner	2012-12-02 13:04:03 +00:00
scripts	remove support for ubicom32	2012-11-30 10:53:55 +00:00
target	imagebuilder: use file_copy to deploy files/ in the image generation phase	2012-12-02 12:20:43 +00:00
toolchain	toolchain: use file_copy to install the initial gcc files	2012-12-02 12:20:47 +00:00
tools	ipkg-utils: Force gnu format for tar (#12496 )	2012-11-19 19:29:01 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	Change default TARGET_ROOTFS_RESERVED_PCT to zero to avoid wasted space	2012-12-02 13:04:01 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	Makefile: add a check to bail out early when the path to the openwrt directory contains spaces (#12344 )	2012-10-21 02:00:11 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
rules.mk	rules.mk: provide a macro "file_copy" which removes any symlink in the destination dir that would be overwritten	2012-12-02 12:20:34 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org