openwrt/target/linux/sunxi/patches-3.14/192-ahci-platform-changes.p...

306 lines
8.7 KiB
Diff

From a52ae09871d171d6771b4bef2d4c56dd435e740f Mon Sep 17 00:00:00 2001
From: Roger Quadros <rogerq@ti.com>
Date: Mon, 20 Jan 2014 16:32:33 +0200
Subject: [PATCH] ata: ahci_platform: Add DT compatible for Synopsis DWC AHCI
controller
Add compatible string "snps,dwc-ahci", which should be used
for Synopsis Designware SATA cores. e.g. on TI OMAP5 and DRA7 platforms.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/ata/ahci_platform.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index bdadec1..d7e55ba 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -609,6 +609,7 @@ static const struct of_device_id ahci_of_match[] = {
{ .compatible = "snps,spear-ahci", },
{ .compatible = "snps,exynos5440-ahci", },
{ .compatible = "ibm,476gtr-ahci", },
+ { .compatible = "snps,dwc-ahci", },
{},
};
MODULE_DEVICE_TABLE(of, ahci_of_match);
--
2.0.3
From 2be39fa6b6531bd083c766999345adc348b14c77 Mon Sep 17 00:00:00 2001
From: Roger Quadros <rogerq@ti.com>
Date: Mon, 27 Jan 2014 16:41:18 +0200
Subject: [PATCH] ata: ahci_platform: Manage SATA PHY
Some platforms have a PHY hooked up to the
SATA controller. The PHY needs to be initialized
and powered up for SATA to work. We do that
using the PHY framework.
CC: Balaji T K <balajitk@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/ata/ahci.h | 2 ++
drivers/ata/ahci_platform.c | 47 +++++++++++++++++++++++++++++++++++++++++++--
2 files changed, 47 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index bf8100c..3ab7ac9 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -37,6 +37,7 @@
#include <linux/clk.h>
#include <linux/libata.h>
+#include <linux/phy/phy.h>
#include <linux/regulator/consumer.h>
/* Enclosure Management Control */
@@ -325,6 +326,7 @@ struct ahci_host_priv {
u32 em_msg_type; /* EM message type */
struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
struct regulator *target_pwr; /* Optional */
+ struct phy *phy; /* If platform uses phy */
void *plat_data; /* Other platform data */
/*
* Optional ahci_start_engine override, if not set this gets set to the
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index d7e55ba..99d38c1 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/libata.h>
#include <linux/ahci_platform.h>
+#include <linux/phy/phy.h>
#include "ahci.h"
static void ahci_host_stop(struct ata_host *host);
@@ -147,6 +148,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
* the following order:
* 1) Regulator
* 2) Clocks (through ahci_platform_enable_clks)
+ * 3) Phy
*
* If resource enabling fails at any point the previous enabled
* resources are disabled in reverse order.
@@ -171,8 +173,23 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
if (rc)
goto disable_regulator;
+ if (hpriv->phy) {
+ rc = phy_init(hpriv->phy);
+ if (rc)
+ goto disable_clks;
+
+ rc = phy_power_on(hpriv->phy);
+ if (rc) {
+ phy_exit(hpriv->phy);
+ goto disable_clks;
+ }
+ }
+
return 0;
+disable_clks:
+ ahci_platform_disable_clks(hpriv);
+
disable_regulator:
if (hpriv->target_pwr)
regulator_disable(hpriv->target_pwr);
@@ -186,14 +203,20 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
*
* This function disables all ahci_platform managed resources in
* the following order:
- * 1) Clocks (through ahci_platform_disable_clks)
- * 2) Regulator
+ * 1) Phy
+ * 2) Clocks (through ahci_platform_disable_clks)
+ * 3) Regulator
*
* LOCKING:
* None.
*/
void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
{
+ if (hpriv->phy) {
+ phy_power_off(hpriv->phy);
+ phy_exit(hpriv->phy);
+ }
+
ahci_platform_disable_clks(hpriv);
if (hpriv->target_pwr)
@@ -222,6 +245,7 @@ static void ahci_platform_put_resources(struct device *dev, void *res)
* 2) regulator for controlling the targets power (optional)
* 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
* or for non devicetree enabled platforms a single clock
+ * 4) phy (optional)
*
* LOCKING:
* None.
@@ -283,6 +307,25 @@ struct ahci_host_priv *ahci_platform_get_resources(
hpriv->clks[i] = clk;
}
+ hpriv->phy = devm_phy_get(dev, "sata-phy");
+ if (IS_ERR(hpriv->phy)) {
+ rc = PTR_ERR(hpriv->phy);
+ switch (rc) {
+ case -ENODEV:
+ case -ENOSYS:
+ /* continue normally */
+ hpriv->phy = NULL;
+ break;
+
+ case -EPROBE_DEFER:
+ goto err_out;
+
+ default:
+ dev_err(dev, "couldn't get sata-phy\n");
+ goto err_out;
+ }
+ }
+
devres_remove_group(dev, NULL);
return hpriv;
--
2.0.3
From 22d93de35a39507bcdf0c62c5e1fab0625f7c6f6 Mon Sep 17 00:00:00 2001
From: Roger Quadros <rogerq@ti.com>
Date: Wed, 9 Oct 2013 15:08:59 +0300
Subject: [PATCH] ata: ahci_platform: runtime resume the device before use
On OMAP platforms the device needs to be runtime resumed before
it can be accessed. The OMAP HWMOD framework takes care of
enabling the module and its resources based on the
device's runtime PM state.
In this patch we runtime resume during .probe() and runtime suspend
after .remove().
We also update the runtime PM state during .resume().
CC: Balaji T K <balajitk@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/ata/ahci.h | 1 +
drivers/ata/ahci_platform.c | 15 +++++++++++++++
2 files changed, 16 insertions(+)
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 3ab7ac9..51af275b 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -324,6 +324,7 @@ struct ahci_host_priv {
u32 em_loc; /* enclosure management location */
u32 em_buf_sz; /* EM buffer size in byte */
u32 em_msg_type; /* EM message type */
+ bool got_runtime_pm; /* Did we do pm_runtime_get? */
struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
struct regulator *target_pwr; /* Optional */
struct phy *phy; /* If platform uses phy */
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 99d38c1..75698a4 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -24,6 +24,7 @@
#include <linux/libata.h>
#include <linux/ahci_platform.h>
#include <linux/phy/phy.h>
+#include <linux/pm_runtime.h>
#include "ahci.h"
static void ahci_host_stop(struct ata_host *host);
@@ -229,6 +230,11 @@ static void ahci_platform_put_resources(struct device *dev, void *res)
struct ahci_host_priv *hpriv = res;
int c;
+ if (hpriv->got_runtime_pm) {
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
+ }
+
for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
clk_put(hpriv->clks[c]);
}
@@ -326,6 +332,10 @@ struct ahci_host_priv *ahci_platform_get_resources(
}
}
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
+ hpriv->got_runtime_pm = true;
+
devres_remove_group(dev, NULL);
return hpriv;
@@ -635,6 +645,11 @@ int ahci_platform_resume(struct device *dev)
if (rc)
goto disable_resources;
+ /* We resumed so update PM runtime state */
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
return 0;
disable_resources:
--
2.0.3
From 22cccaf7a29b2a9d8a1440d089f399a6d2432b81 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Sun, 23 Feb 2014 11:37:17 +0100
Subject: [PATCH] ahci_sunxi: Use msleep instead of mdelay
ahci_sunxi_phy_init is called from the probe and resume code paths, and
sleeping is safe in both, so use msleep instead of mdelay.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/ata/ahci_sunxi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c
index 001f7dfc..d1bf3f7 100644
--- a/drivers/ata/ahci_sunxi.c
+++ b/drivers/ata/ahci_sunxi.c
@@ -90,7 +90,7 @@ static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
/* This magic is from the original code */
writel(0, reg_base + AHCI_RWCR);
- mdelay(5);
+ msleep(5);
sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19));
sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
@@ -105,7 +105,7 @@ static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
(0x7 << 20), (0x3 << 20));
sunxi_clrsetbits(reg_base + AHCI_PHYCS2R,
(0x1f << 5), (0x19 << 5));
- mdelay(5);
+ msleep(5);
sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19));
@@ -137,7 +137,7 @@ static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
udelay(1);
} while (1);
- mdelay(15);
+ msleep(15);
writel(0x7, reg_base + AHCI_RWCR);
--
2.0.3