openwrt/target/linux/sunxi/patches-3.14/135-pinctrl-fixes.patch

102 lines
3.6 KiB
Diff

From 68a7d9940935cb71440a9ff384e5859592b0dbfd Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Sat, 14 Dec 2013 17:20:13 +0100
Subject: [PATCH] pinctrl-sunxi: Fix sun5i-a13 port F multiplexing
The correct value for selecting the mmc0 function on port F pins is 2 not 4,
as per the data-sheet:
http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/pinctrl/pinctrl-sunxi-pins.h | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-sunxi-pins.h b/drivers/pinctrl/pinctrl-sunxi-pins.h
index 6fd8d4d..3d60669 100644
--- a/drivers/pinctrl/pinctrl-sunxi-pins.h
+++ b/drivers/pinctrl/pinctrl-sunxi-pins.h
@@ -1932,27 +1932,27 @@ static const struct sunxi_desc_pin sun5i_a13_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF0,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x4, "mmc0")), /* D1 */
+ SUNXI_FUNCTION(0x2, "mmc0")), /* D1 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF1,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x4, "mmc0")), /* D0 */
+ SUNXI_FUNCTION(0x2, "mmc0")), /* D0 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF2,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x4, "mmc0")), /* CLK */
+ SUNXI_FUNCTION(0x2, "mmc0")), /* CLK */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF3,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x4, "mmc0")), /* CMD */
+ SUNXI_FUNCTION(0x2, "mmc0")), /* CMD */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF4,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x4, "mmc0")), /* D3 */
+ SUNXI_FUNCTION(0x2, "mmc0")), /* D3 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF5,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x4, "mmc0")), /* D2 */
+ SUNXI_FUNCTION(0x2, "mmc0")), /* D2 */
/* Hole */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PG0,
SUNXI_FUNCTION(0x0, "gpio_in"),
--
2.0.3
From 8d2c11e63a3302bbbdac41fc765c881da8a8eb37 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Sat, 15 Feb 2014 12:58:17 +0100
Subject: [PATCH] pinctrl-sunxi: Fix hang on gpio irq
Our irq handler was missing chained_irq_enter / exit calls, causing a
hard hang as soon as a gpio irq happened.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/pinctrl/pinctrl-sunxi.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c
index f9fabe9..d16da53 100644
--- a/drivers/pinctrl/pinctrl-sunxi.c
+++ b/drivers/pinctrl/pinctrl-sunxi.c
@@ -13,6 +13,7 @@
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/gpio.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/irqdomain.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/module.h>
@@ -670,6 +671,8 @@ static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc)
struct sunxi_pinctrl *pctl = irq_get_handler_data(irq);
const unsigned long reg = readl(pctl->membase + IRQ_STATUS_REG);
+ chained_irq_enter(chip, desc);
+
/* Clear all interrupts */
writel(reg, pctl->membase + IRQ_STATUS_REG);
@@ -683,6 +686,7 @@ static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc)
}
chained_irq_exit(chip, desc);
}
+ chained_irq_exit(chip, desc);
}
static struct of_device_id sunxi_pinctrl_match[] = {
--
2.0.3