hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt/target/linux/layerscape/patches-4.14/302-dts-support-layerscape....

6849 lines
199 KiB
Diff
Raw Blame History

From caecd8632a257759735ed6dd9354091cae8a5746 Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Fri, 16 Nov 2018 17:11:32 +0800
Subject: [PATCH] dts: support layerscape This is an integrated patch of dts
for layerscape
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Alan Wang <alan.wang@nxp.com>
Signed-off-by: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Bao Xiaowei <xiaowei.bao@nxp.com>
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
Signed-off-by: Constantin Tudor <constantin.tudor@nxp.com>
Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
Signed-off-by: Guanhua Gao <guanhua.gao@nxp.com>
Signed-off-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Iordache Florinel-R70177 <florinel.iordache@nxp.com>
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
arch/arm/boot/dts/ls1021a-qds.dts | 28 +
arch/arm/boot/dts/ls1021a-twr.dts | 27 +
arch/arm/boot/dts/ls1021a.dtsi | 105 +++-
arch/arm64/boot/dts/freescale/Makefile | 9 +
.../boot/dts/freescale/fsl-ls1012a-2g5rdb.dts | 123 +++++
.../boot/dts/freescale/fsl-ls1012a-frdm.dts | 96 ++--
.../boot/dts/freescale/fsl-ls1012a-frwy.dts | 177 +++++++
.../boot/dts/freescale/fsl-ls1012a-qds.dts | 133 +++--
.../boot/dts/freescale/fsl-ls1012a-rdb.dts | 100 ++--
.../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 179 +++++--
.../boot/dts/freescale/fsl-ls1043-post.dtsi | 3 +-
.../dts/freescale/fsl-ls1043a-qds-sdk.dts | 71 +++
.../boot/dts/freescale/fsl-ls1043a-qds.dts | 201 ++++++--
.../dts/freescale/fsl-ls1043a-rdb-sdk.dts | 71 +++
.../dts/freescale/fsl-ls1043a-rdb-usdpaa.dts | 117 +++++
.../boot/dts/freescale/fsl-ls1043a-rdb.dts | 75 ++-
.../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 196 +++++--
.../boot/dts/freescale/fsl-ls1046-post.dtsi | 2 +-
.../dts/freescale/fsl-ls1046a-qds-sdk.dts | 79 +++
.../boot/dts/freescale/fsl-ls1046a-qds.dts | 189 +++++--
.../dts/freescale/fsl-ls1046a-rdb-sdk.dts | 115 +++++
.../dts/freescale/fsl-ls1046a-rdb-usdpaa.dts | 110 ++++
.../boot/dts/freescale/fsl-ls1046a-rdb.dts | 44 +-
.../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 182 +++++--
.../boot/dts/freescale/fsl-ls1088a-qds.dts | 88 ++--
.../boot/dts/freescale/fsl-ls1088a-rdb.dts | 150 ++++--
.../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 486 ++++++++++++++++--
.../boot/dts/freescale/fsl-ls2080a-qds.dts | 100 ++--
.../boot/dts/freescale/fsl-ls2080a-rdb.dts | 118 +++--
.../boot/dts/freescale/fsl-ls2080a-simu.dts | 38 +-
.../arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 42 +-
.../boot/dts/freescale/fsl-ls2081a-rdb.dts | 163 ++++++
.../boot/dts/freescale/fsl-ls2088a-qds.dts | 158 ++++--
.../boot/dts/freescale/fsl-ls2088a-rdb.dts | 118 +++--
.../arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 44 +-
.../boot/dts/freescale/fsl-ls208xa-qds.dtsi | 43 +-
.../boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 60 +--
.../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 210 ++++++--
.../dts/freescale/qoriq-bman-portals-sdk.dtsi | 55 ++
.../dts/freescale/qoriq-bman-portals.dtsi | 8 +-
.../boot/dts/freescale/qoriq-dpaa-eth.dtsi | 97 ++++
.../dts/freescale/qoriq-fman3-0-10g-0.dtsi | 11 +-
.../dts/freescale/qoriq-fman3-0-10g-1.dtsi | 11 +-
.../dts/freescale/qoriq-fman3-0-1g-0.dtsi | 7 +-
.../dts/freescale/qoriq-fman3-0-1g-1.dtsi | 7 +-
.../dts/freescale/qoriq-fman3-0-1g-2.dtsi | 7 +-
.../dts/freescale/qoriq-fman3-0-1g-3.dtsi | 7 +-
.../dts/freescale/qoriq-fman3-0-1g-4.dtsi | 7 +-
.../dts/freescale/qoriq-fman3-0-1g-5.dtsi | 7 +-
.../boot/dts/freescale/qoriq-fman3-0-6oh.dtsi | 47 ++
.../boot/dts/freescale/qoriq-fman3-0.dtsi | 54 +-
.../dts/freescale/qoriq-qman-portals-sdk.dtsi | 38 ++
.../dts/freescale/qoriq-qman-portals.dtsi | 9 +-
.../boot/dts/fsl/qoriq-fman-0-10g-0.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman-0-1g-0.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman-0-1g-1.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman-0-1g-2.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman-0-1g-3.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman-0-1g-4.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman-1-10g-0.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman-1-1g-0.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman-1-1g-1.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman-1-1g-2.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman-1-1g-3.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman-1-1g-4.dtsi | 4 +-
.../fsl/qoriq-fman3-0-10g-0-best-effort.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi | 4 +-
.../fsl/qoriq-fman3-0-10g-1-best-effort.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi | 4 +-
.../boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi | 4 +-
83 files changed, 3742 insertions(+), 1000 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a-qds-sdk.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman-portals-sdk.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-dpaa-eth.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-6oh.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman-portals-sdk.dtsi
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -124,6 +124,21 @@
};
};
+&qspi {
+ num-cs = <2>;
+ status = "okay";
+
+ qflash0: s25fl128s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ };
+};
+
&enet0 {
tbi-handle = <&tbi0>;
phy-handle = <&sgmii_phy1c>;
@@ -239,6 +254,11 @@
device-width = <1>;
};
+ nand@2,0 {
+ compatible = "fsl,ifc-nand";
+ reg = <0x2 0x0 0x10000>;
+ };
+
fpga: board-control@3,0 {
#address-cells = <1>;
#size-cells = <1>;
@@ -331,3 +351,11 @@
&uart1 {
status = "okay";
};
+
+&can0 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -142,6 +142,21 @@
};
};
+&qspi {
+ num-cs = <2>;
+ status = "okay";
+
+ qflash0: n25q128a13@0 {
+ compatible = "n25q128a13", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ };
+};
+
&enet0 {
tbi-handle = <&tbi1>;
phy-handle = <&sgmii_phy2>;
@@ -228,6 +243,10 @@
};
};
+&esdhc {
+ status = "okay";
+};
+
&sai1 {
status = "okay";
};
@@ -243,3 +262,11 @@
&uart1 {
status = "okay";
};
+
+&can0 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -146,12 +146,13 @@
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
+ big-endian;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
};
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1021a-dcfg", "syscon";
- reg = <0x0 0x1ee0000 0x0 0x10000>;
+ reg = <0x0 0x1ee0000 0x0 0x1000>;
big-endian;
};
@@ -334,25 +335,41 @@
status = "disabled";
};
+ qspi: quadspi@1550000 {
+ compatible = "fsl,ls1021a-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x1550000 0x0 0x10000>,
+ <0x0 0x40000000 0x0 0x4000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "qspi_en", "qspi";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
i2c0: i2c@2180000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,vf610-i2c", "fsl,ls1021a-vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 1>;
+ fsl-scl-gpio = <&gpio3 23 0>;
status = "disabled";
};
i2c1: i2c@2190000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,vf610-i2c", "fsl,ls1021a-vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 1>;
+ fsl-scl-gpio = <&gpio3 23 0>;
status = "disabled";
};
@@ -497,6 +514,17 @@
status = "disabled";
};
+ ftm0: ftm0@29d0000 {
+ compatible = "fsl,ls1021a-ftm-alarm";
+ reg = <0x0 0x29d0000 0x0 0x10000>,
+ <0x0 0x1ee2144 0x0 0x4>,
+ <0x0 0x0157051c 0x0 0x4>;
+ reg-names = "ftm", "pmctrl", "scrachpad";
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ big-endian;
+ status = "okay";
+ };
+
wdog0: watchdog@2ad0000 {
compatible = "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
@@ -550,6 +578,25 @@
<&clockgen 4 1>;
};
+ qdma: qdma@8390000 {
+ compatible = "fsl,ls1021a-qdma";
+ reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
+ <0x0 0x8389000 0x0 0x1000>, /* Status regs */
+ <0x0 0x838a000 0x0 0x2000>; /* Block regs */
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "qdma-error",
+ "qdma-queue0", "qdma-queue1";
+ channels = <8>;
+ block-number = <2>;
+ block-offset = <0x1000>;
+ queues = <2>;
+ status-sizes = <64>;
+ queue-sizes = <64 64>;
+ big-endian;
+ };
+
dcu: dcu@2ce0000 {
compatible = "fsl,ls1021a-dcu";
reg = <0x0 0x2ce0000 0x0 0x10000>;
@@ -684,6 +731,10 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ configure-gfladj;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
pcie@3400000 {
@@ -691,7 +742,9 @@
reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+ interrupt-names = "pme", "aer";
fsl,pcie-scfg = <&scfg 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -714,7 +767,9 @@
reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */
0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+ interrupt-names = "pme", "aer";
fsl,pcie-scfg = <&scfg 1>;
#address-cells = <3>;
#size-cells = <2>;
@@ -731,5 +786,45 @@
<0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ can0: can@2a70000 {
+ compatible = "fsl,ls1021ar2-flexcan";
+ reg = <0x0 0x2a70000 0x0 0x1000>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+ clock-names = "ipg", "per";
+ big-endian;
+ status = "disabled";
+ };
+
+ can1: can@2a80000 {
+ compatible = "fsl,ls1021ar2-flexcan";
+ reg = <0x0 0x2a80000 0x0 0x1000>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+ clock-names = "ipg", "per";
+ big-endian;
+ status = "disabled";
+ };
+
+ can2: can@2a90000 {
+ compatible = "fsl,ls1021ar2-flexcan";
+ reg = <0x0 0x2a90000 0x0 0x1000>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+ clock-names = "ipg", "per";
+ big-endian;
+ status = "disabled";
+ };
+
+ can3: can@2aa0000 {
+ compatible = "fsl,ls1021ar2-flexcan";
+ reg = <0x0 0x2aa0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+ clock-names = "ipg", "per";
+ big-endian;
+ status = "disabled";
+ };
};
};
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -1,15 +1,24 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds-sdk.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb-sdk.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb-usdpaa.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds-sdk.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb-sdk.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb-usdpaa.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
@@ -0,0 +1,123 @@
+/*
+ * Device Tree file for NXP LS1012A 2G5RDB Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Bhaskar Upadhaya <bhaskar.upadhaya@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+ model = "LS1012A 2G5RDB Board";
+ compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
+
+ aliases {
+ ethernet0 = &pfe_mac0;
+ ethernet1 = &pfe_mac1;
+ };
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&qspi {
+ num-cs = <2>;
+ bus-num = <0>;
+ status = "okay";
+
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+ reg = <0>;
+ };
+};
+
+&sata {
+ status = "okay";
+};
+
+&pfe {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@0 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>; /* GEM_ID */
+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */
+ fsl,gemac-phy-id = <0x1>; /* PHY_ID */
+ fsl,mdio-mux-val = <0x0>;
+ phy-mode = "sgmii-2500";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x1>; /* enabled/disabled */
+ };
+ };
+
+ ethernet@1 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>; /* GEM_ID */
+ fsl,gemac-bus-id = < 0x0>; /* BUS_ID */
+ fsl,gemac-phy-id = < 0x2>; /* PHY_ID */
+ fsl,mdio-mux-val = <0x0>;
+ phy-mode = "sgmii-2500";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x0>; /* enabled/disabled */
+ };
+ };
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
@@ -1,45 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Freescale LS1012A Freedom Board.
*
* Copyright 2016 Freescale Semiconductor, Inc.
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -49,6 +13,11 @@
model = "LS1012A Freedom Board";
compatible = "fsl,ls1012a-frdm", "fsl,ls1012a";
+ aliases {
+ ethernet0 = &pfe_mac0;
+ ethernet1 = &pfe_mac1;
+ };
+
sys_mclk: clock-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -110,6 +79,44 @@
};
};
+&pfe {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@0 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>; /* GEM_ID */
+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */
+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */
+ fsl,mdio-mux-val = <0x0>;
+ phy-mode = "sgmii";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x1>; /* enabled/disabled */
+ };
+ };
+
+ ethernet@1 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>; /* GEM_ID */
+ fsl,gemac-bus-id = <0x1>; /* BUS_ID */
+ fsl,gemac-phy-id = <0x1>; /* PHY_ID */
+ fsl,mdio-mux-val = <0x0>;
+ phy-mode = "sgmii";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x0>; /* enabled/disabled */
+ };
+ };
+};
+
&sai2 {
status = "okay";
};
@@ -117,3 +124,18 @@
&sata {
status = "okay";
};
+
+&qspi {
+ status = "okay";
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+ reg = <0>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+ };
+
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
@@ -0,0 +1,177 @@
+/*
+ * Device Tree file for NXP LS1012A FRWY Board.
+ *
+ * Copyright 2018 NXP
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+ model = "LS1012A FRWY Board";
+ compatible = "fsl,ls1012a-frwy", "fsl,ls1012a";
+
+ aliases {
+ ethernet0 = &pfe_mac0;
+ ethernet1 = &pfe_mac1;
+ };
+
+ sys_mclk: clock-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Speaker Ext",
+ "Line", "Line In Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "Microphone Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "Speaker Ext", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ frame-master;
+ bitclock-master;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&codec>;
+ frame-master;
+ bitclock-master;
+ system-clock-frequency = <25000000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ codec: sgtl5000@a {
+ compatible = "fsl,sgtl5000";
+ #sound-dai-cells = <0>;
+ reg = <0xa>;
+ VDDA-supply = <&reg_1p8v>;
+ VDDIO-supply = <&reg_1p8v>;
+ clocks = <&sys_mclk>;
+ };
+};
+
+&qspi {
+ num-cs = <1>;
+ bus-num = <0>;
+ status = "okay";
+
+ qflash0: w25q16dw@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ m25p,fast-read;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&pfe {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@0 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>; /* GEM_ID */
+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */
+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */
+ fsl,mdio-mux-val = <0x0>;
+ phy-mode = "sgmii";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x1>; /* enabled/disabled */
+ };
+ };
+
+ ethernet@1 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>; /* GEM_ID */
+ fsl,gemac-bus-id = <0x1>; /* BUS_ID */
+ fsl,gemac-phy-id = <0x1>; /* PHY_ID */
+ fsl,mdio-mux-val = <0x0>;
+ phy-mode = "sgmii";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x0>; /* enabled/disabled */
+ };
+ };
+};
+
+&sai2 {
+ status = "okay";
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -1,45 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Freescale LS1012A QDS Board.
*
* Copyright 2016 Freescale Semiconductor, Inc.
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -49,6 +13,11 @@
model = "LS1012A QDS Board";
compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
+ aliases {
+ ethernet0 = &pfe_mac0;
+ ethernet1 = &pfe_mac1;
+ };
+
sys_mclk: clock-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -93,6 +62,43 @@
};
};
+&pcie {
+ status = "okay";
+};
+
+&dspi {
+ bus-num = <0>;
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a11", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ };
+
+ flash@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "sst25wf040b", "jedec,spi-nor";
+ spi-cpol;
+ spi-cpha;
+ reg = <1>;
+ spi-max-frequency = <10000000>;
+ };
+
+ flash@2 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "en25s64", "jedec,spi-nor";
+ spi-cpol;
+ spi-cpha;
+ reg = <2>;
+ spi-max-frequency = <10000000>;
+ };
+};
+
&duart0 {
status = "okay";
};
@@ -131,6 +137,44 @@
};
};
+&pfe {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@0 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>; /* GEM_ID */
+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */
+ fsl,gemac-phy-id = <0x1>; /* PHY_ID */
+ fsl,mdio-mux-val = <0x2>;
+ phy-mode = "sgmii-2500";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x1>; /* enabled/disabled */
+ };
+ };
+
+ ethernet@1 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>; /* GEM_ID */
+ fsl,gemac-bus-id = <0x1>; /* BUS_ID */
+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */
+ fsl,mdio-mux-val = <0x3>;
+ phy-mode = "sgmii-2500";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x0>; /* enabled/disabled */
+ };
+ };
+};
+
&sai2 {
status = "okay";
};
@@ -138,3 +182,18 @@
&sata {
status = "okay";
};
+
+&qspi {
+ status = "okay";
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+ reg = <0>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+ };
+
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -1,45 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Freescale LS1012A RDB Board.
*
* Copyright 2016 Freescale Semiconductor, Inc.
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -48,6 +12,15 @@
/ {
model = "LS1012A RDB Board";
compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
+
+ aliases {
+ ethernet0 = &pfe_mac0;
+ ethernet1 = &pfe_mac1;
+ };
+};
+
+&pcie {
+ status = "okay";
};
&duart0 {
@@ -74,3 +47,56 @@
&sata {
status = "okay";
};
+
+&pfe {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@0 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>; /* GEM_ID */
+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */
+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */
+ fsl,mdio-mux-val = <0x0>;
+ phy-mode = "sgmii";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x1>; /* enabled/disabled */
+ };
+ };
+
+ ethernet@1 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>; /* GEM_ID */
+ fsl,gemac-bus-id = < 0x1 >; /* BUS_ID */
+ fsl,gemac-phy-id = < 0x1 >; /* PHY_ID */
+ fsl,mdio-mux-val = <0x0>;
+ phy-mode = "rgmii-txid";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x0>; /* enabled/disabled */
+ };
+ };
+};
+
+&qspi {
+ status = "okay";
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+ reg = <0>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+ };
+
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -1,45 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Freescale Layerscape-1012A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -70,6 +34,24 @@
reg = <0x0>;
clocks = <&clockgen 1 0>;
#cooling-cells = <2>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+ };
+
+ idle-states {
+ /*
+ * PSCI node is not added default, U-boot will add missing
+ * parts if it determines to use PSCI.
+ */
+ entry-method = "arm,psci";
+
+ CPU_PH20: cpu-ph20 {
+ compatible = "arm,idle-state";
+ idle-state-name = "PH20";
+ arm,psci-suspend-param = <0x0>;
+ entry-latency-us = <1000>;
+ exit-latency-us = <1000>;
+ min-residency-us = <3000>;
};
};
@@ -247,7 +229,7 @@
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1012a-dcfg",
"syscon";
- reg = <0x0 0x1ee0000 0x0 0x10000>;
+ reg = <0x0 0x1ee0000 0x0 0x1000>;
big-endian;
};
@@ -335,13 +317,23 @@
};
};
+ ftm0: ftm0@29d0000 {
+ compatible = "fsl,ls1012a-ftm-alarm";
+ reg = <0x0 0x29d0000 0x0 0x10000>,
+ <0x0 0x1ee2140 0x0 0x4>;
+ reg-names = "ftm", "pmctrl";
+ interrupts = <0 86 0x4>;
+ big-endian;
+ };
+
i2c0: i2c@2180000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,vf610-i2c", "fsl,ls1012a-vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen 4 3>;
+ fsl-scl-gpio = <&gpio0 13 0>;
status = "disabled";
};
@@ -351,7 +343,20 @@
#size-cells = <0>;
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>;
+ status = "disabled";
+ };
+
+ dspi: dspi@2100000 {
+ compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2100000 0x0 0x10000>;
+ interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "dspi";
clocks = <&clockgen 4 0>;
+ spi-num-chipselects = <5>;
+ big-endian;
status = "disabled";
};
@@ -400,6 +405,20 @@
big-endian;
};
+ qspi: quadspi@1550000 {
+ compatible = "fsl,ls1012a-qspi", "fsl,ls1021a-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x1550000 0x0 0x10000>,
+ <0x0 0x40000000 0x0 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "qspi_en", "qspi";
+ clocks = <&clockgen 4 0>, <&clockgen 4 0>;
+ big-endian;
+ status = "disabled";
+ };
+
sai1: sai@2b50000 {
#sound-dai-cells = <0>;
compatible = "fsl,vf610-sai";
@@ -451,6 +470,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
@@ -471,5 +491,84 @@
dr_mode = "host";
phy_type = "ulpi";
};
+
+ msi: msi-controller1@1572000 {
+ compatible = "fsl,ls1012a-msi";
+ reg = <0x0 0x1572000 0x0 0x8>;
+ msi-controller;
+ interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pcie: pcie@3400000 {
+ compatible = "fsl,ls1012a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
+ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <0 118 0x4>, /* AER interrupt */
+ <0 117 0x4>; /* PME interrupt */
+ interrupt-names = "aer", "pme";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&msi>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 110 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ rcpm: rcpm@1ee2000 {
+ compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1";
+ reg = <0x0 0x1ee2000 0x0 0x1000>;
+ fsl,#rcpm-wakeup-cells = <1>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ pfe_reserved: packetbuffer@83400000 {
+ reg = <0 0x83400000 0 0xc00000>;
+ };
+ };
+
+ pfe: pfe@04000000 {
+ compatible = "fsl,pfe";
+ reg = <0x0 0x04000000 0x0 0xc00000>, /* AXI 16M */
+ <0x0 0x83400000 0x0 0xc00000>; /* PFE DDR 12M */
+ reg-names = "pfe", "pfe-ddr";
+ fsl,pfe-num-interfaces = <0x2>;
+ interrupts = <0 172 0x4>, /* HIF interrupt */
+ <0 173 0x4>, /*HIF_NOCPY interrupt */
+ <0 174 0x4>; /* WoL interrupt */
+ interrupt-names = "pfe_hif", "pfe_hif_nocpy", "pfe_wol";
+ memory-region = <&pfe_reserved>;
+ fsl,pfe-scfg = <&scfg 0>;
+ fsl,rcpm-wakeup = <&rcpm 0xf0000020>;
+ clocks = <&clockgen 4 0>;
+ clock-names = "pfe";
+
+ status = "okay";
+ pfe_mac0: ethernet@0 {
+ };
+
+ pfe_mac1: ethernet@1 {
+ };
+ };
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
};
};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* QorIQ FMan v3 device tree nodes for ls1043
*
* Copyright 2015-2016 Freescale Semiconductor Inc.
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
*/
&soc {
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds-sdk.dts
@@ -0,0 +1,71 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "fsl-ls1043a-qds.dts"
+#include "qoriq-qman-portals-sdk.dtsi"
+#include "qoriq-bman-portals-sdk.dtsi"
+
+&bman_fbpr {
+ compatible = "fsl,bman-fbpr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+&qman_fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+&qman_pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
+&soc {
+#include "qoriq-dpaa-eth.dtsi"
+#include "qoriq-fman3-0-6oh.dtsi"
+};
+
+&fman0 {
+ compatible = "fsl,fman", "simple-bus";
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
* Copyright 2014-2015 Freescale Semiconductor, Inc.
*
* Mingkai Hu <Mingkai.hu@freescale.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -60,6 +23,22 @@
serial1 = &duart1;
serial2 = &duart2;
serial3 = &duart3;
+ sgmii_riser_s1_p1 = &sgmii_phy_s1_p1;
+ sgmii_riser_s2_p1 = &sgmii_phy_s2_p1;
+ sgmii_riser_s3_p1 = &sgmii_phy_s3_p1;
+ sgmii_riser_s4_p1 = &sgmii_phy_s4_p1;
+ qsgmii_s1_p1 = &qsgmii_phy_s1_p1;
+ qsgmii_s1_p2 = &qsgmii_phy_s1_p2;
+ qsgmii_s1_p3 = &qsgmii_phy_s1_p3;
+ qsgmii_s1_p4 = &qsgmii_phy_s1_p4;
+ qsgmii_s2_p1 = &qsgmii_phy_s2_p1;
+ qsgmii_s2_p2 = &qsgmii_phy_s2_p2;
+ qsgmii_s2_p3 = &qsgmii_phy_s2_p3;
+ qsgmii_s2_p4 = &qsgmii_phy_s2_p4;
+ emi1_slot1 = &ls1043mdio_s1;
+ emi1_slot2 = &ls1043mdio_s2;
+ emi1_slot3 = &ls1043mdio_s3;
+ emi1_slot4 = &ls1043mdio_s4;
};
chosen {
@@ -179,7 +158,153 @@
#size-cells = <1>;
spi-max-frequency = <20000000>;
reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
};
};
#include "fsl-ls1043-post.dtsi"
+
+&fman0 {
+ ethernet@e0000 {
+ phy-handle = <&qsgmii_phy_s2_p1>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&qsgmii_phy_s2_p2>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&qsgmii_phy_s2_p3>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@ea000 {
+ phy-handle = <&qsgmii_phy_s2_p4>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@f0000 { /* DTSEC9/10GEC1 */
+ fixed-link = <1 1 10000 0 0>;
+ phy-connection-type = "xgmii";
+ };
+};
+
+&fpga {
+ mdio-mux-emi1 {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&mdio0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x54 1>; /* BRDCFG4 */
+ mux-mask = <0xe0>; /* EMI1 */
+
+ /* On-board RGMII1 PHY */
+ ls1043mdio0: mdio@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rgmii_phy1: ethernet-phy@1 { /* MAC3 */
+ reg = <0x1>;
+ };
+ };
+
+ /* On-board RGMII2 PHY */
+ ls1043mdio1: mdio@1 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rgmii_phy2: ethernet-phy@2 { /* MAC4 */
+ reg = <0x2>;
+ };
+ };
+
+ /* Slot 1 */
+ ls1043mdio_s1: mdio@2 {
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ qsgmii_phy_s1_p1: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+ qsgmii_phy_s1_p2: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+ qsgmii_phy_s1_p3: ethernet-phy@6 {
+ reg = <0x6>;
+ };
+ qsgmii_phy_s1_p4: ethernet-phy@7 {
+ reg = <0x7>;
+ };
+
+ sgmii_phy_s1_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+
+ /* Slot 2 */
+ ls1043mdio_s2: mdio@3 {
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ qsgmii_phy_s2_p1: ethernet-phy@8 {
+ reg = <0x8>;
+ };
+ qsgmii_phy_s2_p2: ethernet-phy@9 {
+ reg = <0x9>;
+ };
+ qsgmii_phy_s2_p3: ethernet-phy@a {
+ reg = <0xa>;
+ };
+ qsgmii_phy_s2_p4: ethernet-phy@b {
+ reg = <0xb>;
+ };
+
+ sgmii_phy_s2_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+
+ /* Slot 3 */
+ ls1043mdio_s3: mdio@4 {
+ reg = <0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sgmii_phy_s3_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+
+ /* Slot 4 */
+ ls1043mdio_s4: mdio@5 {
+ reg = <0xa0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sgmii_phy_s4_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts
@@ -0,0 +1,71 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "fsl-ls1043a-rdb.dts"
+#include "qoriq-qman-portals-sdk.dtsi"
+#include "qoriq-bman-portals-sdk.dtsi"
+
+&bman_fbpr {
+ compatible = "fsl,bman-fbpr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+&qman_fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+&qman_pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
+&soc {
+#include "qoriq-dpaa-eth.dtsi"
+#include "qoriq-fman3-0-6oh.dtsi"
+};
+
+&fman0 {
+ compatible = "fsl,fman", "simple-bus";
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts
@@ -0,0 +1,117 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright (C) 2014-2015, Freescale Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "fsl-ls1043a-rdb-sdk.dts"
+
+&soc {
+ bp7: buffer-pool@7 {
+ compatible = "fsl,p4080-bpool", "fsl,bpool";
+ fsl,bpid = <7>;
+ fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>;
+ fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>;
+ };
+
+ bp8: buffer-pool@8 {
+ compatible = "fsl,p4080-bpool", "fsl,bpool";
+ fsl,bpid = <8>;
+ fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>;
+ fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+ };
+
+ bp9: buffer-pool@9 {
+ compatible = "fsl,p4080-bpool", "fsl,bpool";
+ fsl,bpid = <9>;
+ fsl,bpool-ethernet-cfg = <0 0 0 2048 0 0xfeedabba>;
+ fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+ };
+
+ fsl,dpaa {
+ compatible = "fsl,ls1043a", "fsl,dpaa", "simple-bus";
+
+ ethernet@0 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x50 1 0x51 1>;
+ fsl,qman-frame-queues-tx = <0x70 1 0x71 1>;
+ };
+
+ ethernet@1 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x52 1 0x53 1>;
+ fsl,qman-frame-queues-tx = <0x72 1 0x73 1>;
+ };
+
+ ethernet@2 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x54 1 0x55 1>;
+ fsl,qman-frame-queues-tx = <0x74 1 0x75 1>;
+ };
+
+ ethernet@3 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x56 1 0x57 1>;
+ fsl,qman-frame-queues-tx = <0x76 1 0x77 1>;
+ };
+
+ ethernet@4 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x58 1 0x59 1>;
+ fsl,qman-frame-queues-tx = <0x78 1 0x79 1>;
+ };
+
+ ethernet@5 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x60 1 0x61 1>;
+ fsl,qman-frame-queues-tx = <0x80 1 0x81 1>;
+ };
+
+ ethernet@8 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x5c 1 0x5d 1>;
+ fsl,qman-frame-queues-tx = <0x7c 1 0x7d 1>;
+
+ };
+ dpa-fman0-oh@2 {
+ compatible = "fsl,dpa-oh";
+ /* Define frame queues for the OH port*/
+ /* <OH Rx error, OH Rx default> */
+ fsl,qman-frame-queues-oh = <0x5a 1 0x5b 1>;
+ fsl,fman-oh-port = <&fman0_oh2>;
+ };
+ };
+};
+/ {
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ usdpaa_mem: usdpaa_mem {
+ compatible = "fsl,usdpaa-mem";
+ alloc-ranges = <0 0 0x10000 0>;
+ size = <0 0x10000000>;
+ alignment = <0 0x10000000>;
+ };
+ };
+};
+
+&fman0 {
+ fman0_oh2: port@83000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-port-oh";
+ reg = <0x83000 0x1000>;
+ };
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
* Copyright 2014-2015 Freescale Semiconductor, Inc.
*
* Mingkai Hu <Mingkai.hu@freescale.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -86,6 +49,10 @@
compatible = "pericom,pt7c4338";
reg = <0x68>;
};
+ rtc@51 {
+ compatible = "nxp,pcf85263";
+ reg = <0x51>;
+ };
};
&ifc {
@@ -130,6 +97,38 @@
reg = <0>;
spi-max-frequency = <1000000>; /* input clock */
};
+
+ slic@2 {
+ compatible = "maxim,ds26522";
+ reg = <2>;
+ spi-max-frequency = <2000000>;
+ fsl,spi-cs-sck-delay = <100>;
+ fsl,spi-sck-cs-delay = <50>;
+ };
+
+ slic@3 {
+ compatible = "maxim,ds26522";
+ reg = <3>;
+ spi-max-frequency = <2000000>;
+ fsl,spi-cs-sck-delay = <100>;
+ fsl,spi-sck-cs-delay = <50>;
+ };
+};
+
+&uqe {
+ ucc_hdlc: ucc@2000 {
+ compatible = "fsl,ucc-hdlc";
+ rx-clock-name = "clk8";
+ tx-clock-name = "clk9";
+ fsl,rx-sync-clock = "rsync_pin";
+ fsl,tx-sync-clock = "tsync_pin";
+ fsl,tx-timeslot-mask = <0xfffffffe>;
+ fsl,rx-timeslot-mask = <0xfffffffe>;
+ fsl,tdm-framer-type = "e1";
+ fsl,tdm-id = <0>;
+ fsl,siram-entry-id = <0>;
+ fsl,tdm-interface;
+ };
};
&duart0 {
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
* Copyright 2014-2015 Freescale Semiconductor, Inc.
*
* Mingkai Hu <Mingkai.hu@freescale.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/thermal/thermal.h>
@@ -81,6 +44,7 @@
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
#cooling-cells = <2>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu1: cpu@1 {
@@ -89,6 +53,7 @@
reg = <0x1>;
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu2: cpu@2 {
@@ -97,6 +62,7 @@
reg = <0x2>;
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu3: cpu@3 {
@@ -105,6 +71,7 @@
reg = <0x3>;
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_PH20>;
};
l2: l2-cache {
@@ -112,6 +79,23 @@
};
};
+ idle-states {
+ /*
+ * PSCI node is not added default, U-boot will add missing
+ * parts if it determines to use PSCI.
+ */
+ entry-method = "arm,psci";
+
+ CPU_PH20: cpu-ph20 {
+ compatible = "arm,idle-state";
+ idle-state-name = "PH20";
+ arm,psci-suspend-param = <0x0>;
+ entry-latency-us = <1000>;
+ exit-latency-us = <1000>;
+ min-residency-us = <3000>;
+ };
+ };
+
memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0 0x80000000>;
@@ -255,7 +239,7 @@
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1043a-dcfg", "syscon";
- reg = <0x0 0x1ee0000 0x0 0x10000>;
+ reg = <0x0 0x1ee0000 0x0 0x1000>;
big-endian;
};
@@ -422,7 +406,7 @@
};
i2c0: i2c@2180000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,vf610-i2c", "fsl,ls1043a-vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
@@ -432,6 +416,7 @@
dmas = <&edma0 1 39>,
<&edma0 1 38>;
dma-names = "tx", "rx";
+ fsl-scl-gpio = <&gpio4 12 0>;
status = "disabled";
};
@@ -536,6 +521,72 @@
#interrupt-cells = <2>;
};
+ uqe: uqe@2400000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe", "simple-bus";
+ ranges = <0x0 0x0 0x2400000 0x40000>;
+ reg = <0x0 0x2400000 0x0 0x480>;
+ brg-frequency = <100000000>;
+ bus-frequency = <200000000>;
+
+ fsl,qe-num-riscs = <1>;
+ fsl,qe-num-snums = <28>;
+
+ qeic: qeic@80 {
+ compatible = "fsl,qe-ic";
+ reg = <0x80 0x80>;
+ #address-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupts = <0 77 0x04 0 77 0x04>;
+ };
+
+ si1: si@700 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,ls1043-qe-si",
+ "fsl,t1040-qe-si";
+ reg = <0x700 0x80>;
+ };
+
+ siram1: siram@1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ls1043-qe-siram",
+ "fsl,t1040-qe-siram";
+ reg = <0x1000 0x800>;
+ };
+
+ ucc@2000 {
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@2200 {
+ cell-index = <3>;
+ reg = <0x2200 0x200>;
+ interrupts = <34>;
+ interrupt-parent = <&qeic>;
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x6000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x6000>;
+ };
+ };
+ };
+
lpuart0: serial@2950000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2950000 0x0 0x1000>;
@@ -590,6 +641,16 @@
status = "disabled";
};
+ ftm0: ftm0@29d0000 {
+ compatible = "fsl,ls1043a-ftm-alarm";
+ reg = <0x0 0x29d0000 0x0 0x10000>,
+ <0x0 0x1ee2140 0x0 0x4>;
+ reg-names = "ftm", "pmctrl";
+ interrupts = <0 86 0x4>;
+ big-endian;
+ status = "okay";
+ };
+
wdog0: wdog@2ad0000 {
compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
@@ -622,6 +683,9 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb3@3000000 {
@@ -631,6 +695,9 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb2: usb3@3100000 {
@@ -640,6 +707,9 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
@@ -652,6 +722,27 @@
dma-coherent;
};
+ qdma: qdma@8380000 {
+ compatible = "fsl,ls1021a-qdma", "fsl,ls1043a-qdma";
+ reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
+ <0x0 0x8390000 0x0 0x10000>, /* Status regs */
+ <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
+ interrupts = <0 152 0x4>,
+ <0 39 0x4>,
+ <0 40 0x4>,
+ <0 41 0x4>,
+ <0 42 0x4>;
+ interrupt-names = "qdma-error", "qdma-queue0",
+ "qdma-queue1", "qdma-queue2", "qdma-queue3";
+ channels = <8>;
+ block-number = <1>;
+ block-offset = <0x10000>;
+ queues = <2>;
+ status-sizes = <64>;
+ queue-sizes = <64 64>;
+ big-endian;
+ };
+
msi1: msi-controller1@1571000 {
compatible = "fsl,ls1043a-msi";
reg = <0x0 0x1571000 0x0 0x8>;
@@ -678,9 +769,9 @@
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 118 0x4>, /* controller interrupt */
- <0 117 0x4>; /* PME interrupt */
- interrupt-names = "intr", "pme";
+ interrupts = <0 117 0x4>, /* PME interrupt */
+ <0 118 0x4>; /* aer interrupt */
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -703,9 +794,9 @@
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 128 0x4>,
- <0 127 0x4>;
- interrupt-names = "intr", "pme";
+ interrupts = <0 127 0x4>,
+ <0 128 0x4>;
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -728,9 +819,9 @@
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x50 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 162 0x4>,
- <0 161 0x4>;
- interrupt-names = "intr", "pme";
+ interrupts = <0 161 0x4>,
+ <0 162 0x4>;
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -749,6 +840,13 @@
};
};
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
+
};
#include "qoriq-qman-portals.dtsi"
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* QorIQ FMan v3 device tree nodes for ls1046
*
* Copyright 2015-2016 Freescale Semiconductor Inc.
*
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
*/
&soc {
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts
@@ -0,0 +1,79 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "fsl-ls1046a-qds.dts"
+#include "qoriq-qman-portals-sdk.dtsi"
+#include "qoriq-bman-portals-sdk.dtsi"
+
+&bman_fbpr {
+ compatible = "fsl,bman-fbpr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+&qman_fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+&qman_pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
+&soc {
+#include "qoriq-dpaa-eth.dtsi"
+#include "qoriq-fman3-0-6oh.dtsi"
+};
+
+&fsldpaa {
+ ethernet@9 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&enet7>;
+ dma-coherent;
+ };
+};
+
+&fman0 {
+ compatible = "fsl,fman", "simple-bus";
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
*
* Shaohui Xie <Shaohui.Xie@nxp.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -61,6 +24,20 @@
serial1 = &duart1;
serial2 = &duart2;
serial3 = &duart3;
+
+ emi1_slot1 = &ls1046mdio_s1;
+ emi1_slot2 = &ls1046mdio_s2;
+ emi1_slot4 = &ls1046mdio_s4;
+
+ sgmii_s1_p1 = &sgmii_phy_s1_p1;
+ sgmii_s1_p2 = &sgmii_phy_s1_p2;
+ sgmii_s1_p3 = &sgmii_phy_s1_p3;
+ sgmii_s1_p4 = &sgmii_phy_s1_p4;
+ sgmii_s4_p1 = &sgmii_phy_s4_p1;
+ qsgmii_s2_p1 = &qsgmii_phy_s2_p1;
+ qsgmii_s2_p2 = &qsgmii_phy_s2_p2;
+ qsgmii_s2_p3 = &qsgmii_phy_s2_p3;
+ qsgmii_s2_p4 = &qsgmii_phy_s2_p4;
};
chosen {
@@ -208,7 +185,143 @@
#size-cells = <1>;
spi-max-frequency = <20000000>;
reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
};
};
#include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+ ethernet@e0000 {
+ phy-handle = <&qsgmii_phy_s2_p1>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&sgmii_phy_s4_p1>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&sgmii_phy_s1_p3>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@ea000 {
+ phy-handle = <&sgmii_phy_s1_p4>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@f0000 { /* DTSEC9/10GEC1 */
+ phy-handle = <&sgmii_phy_s1_p1>;
+ phy-connection-type = "xgmii";
+ };
+
+ ethernet@f2000 { /* DTSEC10/10GEC2 */
+ phy-handle = <&sgmii_phy_s1_p2>;
+ phy-connection-type = "xgmii";
+ };
+};
+
+&fpga {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ mdio-mux-emi1 {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&mdio0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x54 1>; /* BRDCFG4 */
+ mux-mask = <0xe0>; /* EMI1 */
+
+ /* On-board RGMII1 PHY */
+ ls1046mdio0: mdio@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rgmii_phy1: ethernet-phy@1 { /* MAC3 */
+ reg = <0x1>;
+ };
+ };
+
+ /* On-board RGMII2 PHY */
+ ls1046mdio1: mdio@1 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rgmii_phy2: ethernet-phy@2 { /* MAC4 */
+ reg = <0x2>;
+ };
+ };
+
+ /* Slot 1 */
+ ls1046mdio_s1: mdio@2 {
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sgmii_phy_s1_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ sgmii_phy_s1_p2: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ sgmii_phy_s1_p3: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ sgmii_phy_s1_p4: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ /* Slot 2 */
+ ls1046mdio_s2: mdio@3 {
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ qsgmii_phy_s2_p1: ethernet-phy@8 {
+ reg = <0x8>;
+ };
+ qsgmii_phy_s2_p2: ethernet-phy@9 {
+ reg = <0x9>;
+ };
+ qsgmii_phy_s2_p3: ethernet-phy@a {
+ reg = <0xa>;
+ };
+ qsgmii_phy_s2_p4: ethernet-phy@b {
+ reg = <0xb>;
+ };
+ };
+
+ /* Slot 4 */
+ ls1046mdio_s4: mdio@5 {
+ reg = <0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sgmii_phy_s4_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts
@@ -0,0 +1,115 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "fsl-ls1046a-rdb.dts"
+#include "qoriq-qman-portals-sdk.dtsi"
+#include "qoriq-bman-portals-sdk.dtsi"
+
+&bman_fbpr {
+ compatible = "fsl,bman-fbpr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+&qman_fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+&qman_pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
+&soc {
+#include "qoriq-dpaa-eth.dtsi"
+#include "qoriq-fman3-0-6oh.dtsi"
+};
+
+&fsldpaa {
+ ethernet@0 {
+ status = "disabled";
+ };
+ ethernet@1 {
+ status = "disabled";
+ };
+ ethernet@9 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&enet7>;
+ dma-coherent;
+ };
+};
+
+&fman0 {
+ compatible = "fsl,fman", "simple-bus";
+};
+
+&mdio9 {
+ pcsphy6: ethernet-phy@0 {
+ backplane-mode = "10gbase-kr";
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ fsl,lane-handle = <&serdes1>;
+ fsl,lane-reg = <0x8C0 0x40>; /* lane D */
+ };
+};
+
+&mdio10 {
+ pcsphy7: ethernet-phy@0 {
+ backplane-mode = "10gbase-kr";
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ fsl,lane-handle = <&serdes1>;
+ fsl,lane-reg = <0x880 0x40>; /* lane C */
+ };
+};
+
+/* Update MAC connections to backplane PHYs
+ * &mac9 {
+ * phy-handle = <&pcsphy6>;
+ *};
+ *
+ *&mac10 {
+ * phy-handle = <&pcsphy7>;
+ *};
+*/
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts
@@ -0,0 +1,110 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright (C) 2016, Freescale Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "fsl-ls1046a-rdb-sdk.dts"
+
+&soc {
+ bp7: buffer-pool@7 {
+ compatible = "fsl,ls1046a-bpool", "fsl,bpool";
+ fsl,bpid = <7>;
+ fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>;
+ fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>;
+ };
+
+ bp8: buffer-pool@8 {
+ compatible = "fsl,ls1046a-bpool", "fsl,bpool";
+ fsl,bpid = <8>;
+ fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>;
+ fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+ };
+
+ bp9: buffer-pool@9 {
+ compatible = "fsl,ls1046a-bpool", "fsl,bpool";
+ fsl,bpid = <9>;
+ fsl,bpool-ethernet-cfg = <0 0 0 2048 0 0xfeedabba>;
+ fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+ };
+
+ fsl,dpaa {
+ compatible = "fsl,ls1046a", "fsl,dpaa", "simple-bus";
+
+ ethernet@2 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x54 1 0x55 1>;
+ fsl,qman-frame-queues-tx = <0x74 1 0x75 1>;
+ };
+
+ ethernet@3 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x56 1 0x57 1>;
+ fsl,qman-frame-queues-tx = <0x76 1 0x77 1>;
+ };
+
+ ethernet@4 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x58 1 0x59 1>;
+ fsl,qman-frame-queues-tx = <0x78 1 0x79 1>;
+ };
+
+ ethernet@5 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x5a 1 0x5b 1>;
+ fsl,qman-frame-queues-tx = <0x7a 1 0x7b 1>;
+ };
+
+ ethernet@8 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x5c 1 0x5d 1>;
+ fsl,qman-frame-queues-tx = <0x7c 1 0x7d 1>;
+ };
+
+ ethernet@9 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x5e 1 0x5f 1>;
+ fsl,qman-frame-queues-tx = <0x7e 1 0x7f 1>;
+ };
+
+ dpa-fman0-oh@2 {
+ compatible = "fsl,dpa-oh";
+ /* Define frame queues for the OH port*/
+ /* <OH Rx error, OH Rx default> */
+ fsl,qman-frame-queues-oh = <0x60 1 0x61 1>;
+ fsl,fman-oh-port = <&fman0_oh2>;
+ };
+ };
+};
+/ {
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ usdpaa_mem: usdpaa_mem {
+ compatible = "fsl,usdpaa-mem";
+ alloc-ranges = <0 0 0x10000 0>;
+ size = <0 0x10000000>;
+ alignment = <0 0x10000000>;
+ };
+ };
+};
+
+&fman0 {
+ fman0_oh2: port@83000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-port-oh";
+ reg = <0x83000 0x1000>;
+ };
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
*
* Mingkai Hu <mingkai.hu@nxp.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -139,6 +102,7 @@
num-cs = <2>;
bus-num = <0>;
status = "okay";
+ fsl,qspi-has-second-chip;
qflash0: s25fs512s@0 {
compatible = "spansion,m25p80";
@@ -146,6 +110,8 @@
#size-cells = <1>;
spi-max-frequency = <20000000>;
reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
};
qflash1: s25fs512s@1 {
@@ -154,6 +120,8 @@
#size-cells = <1>;
spi-max-frequency = <20000000>;
reg = <1>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
};
};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
*
* Mingkai Hu <mingkai.hu@nxp.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -122,7 +85,7 @@
CPU_PH20: cpu-ph20 {
compatible = "arm,idle-state";
idle-state-name = "PH20";
- arm,psci-suspend-param = <0x00010000>;
+ arm,psci-suspend-param = <0x0>;
entry-latency-us = <1000>;
exit-latency-us = <1000>;
min-residency-us = <3000>;
@@ -214,7 +177,6 @@
clock-names = "qspi_en", "qspi";
clocks = <&clockgen 4 1>, <&clockgen 4 1>;
big-endian;
- fsl,qspi-has-second-chip;
status = "disabled";
};
@@ -304,7 +266,7 @@
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1046a-dcfg", "syscon";
- reg = <0x0 0x1ee0000 0x0 0x10000>;
+ reg = <0x0 0x1ee0000 0x0 0x1000>;
big-endian;
};
@@ -407,7 +369,7 @@
};
i2c0: i2c@2180000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,vf610-i2c", "fsl,ls1046a-vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
@@ -416,6 +378,7 @@
dmas = <&edma0 1 39>,
<&edma0 1 38>;
dma-names = "tx", "rx";
+ fsl-scl-gpio = <&gpio3 12 0>;
status = "disabled";
};
@@ -440,12 +403,13 @@
};
i2c3: i2c@21b0000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,vf610-i2c", "fsl,ls1046a-vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x21b0000 0x0 0x10000>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
+ fsl-scl-gpio = <&gpio3 12 0>;
status = "disabled";
};
@@ -571,6 +535,15 @@
status = "disabled";
};
+ ftm0: ftm0@29d0000 {
+ compatible = "fsl,ls1046a-ftm-alarm";
+ reg = <0x0 0x29d0000 0x0 0x10000>,
+ <0x0 0x1ee2140 0x0 0x4>;
+ reg-names = "ftm", "pmctrl";
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ big-endian;
+ };
+
wdog0: watchdog@2ad0000 {
compatible = "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
@@ -602,6 +575,9 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb@3000000 {
@@ -611,6 +587,9 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb2: usb@3100000 {
@@ -620,6 +599,9 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
@@ -631,6 +613,27 @@
clocks = <&clockgen 4 1>;
};
+ qdma: qdma@8380000 {
+ compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma";
+ reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
+ <0x0 0x8390000 0x0 0x10000>, /* Status regs */
+ <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
+ interrupts = <0 153 0x4>,
+ <0 39 0x4>,
+ <0 40 0x4>,
+ <0 41 0x4>,
+ <0 42 0x4>;
+ interrupt-names = "qdma-error", "qdma-queue0",
+ "qdma-queue1", "qdma-queue2", "qdma-queue3";
+ channels = <8>;
+ block-number = <1>;
+ block-offset = <0x10000>;
+ queues = <2>;
+ status-sizes = <64>;
+ queue-sizes = <64 64>;
+ big-endian;
+ };
+
msi1: msi-controller@1580000 {
compatible = "fsl,ls1046a-msi";
msi-controller;
@@ -661,6 +664,92 @@
<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
};
+ pcie@3400000 {
+ compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
+ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+ interrupt-names = "pme", "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <4>;
+ num-ib-windows = <6>;
+ num-ob-windows = <6>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&msi1>, <&msi2>, <&msi3>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pcie@3500000 {
+ compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
+ 0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pme", "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <2>;
+ num-ib-windows = <6>;
+ num-ob-windows = <6>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&msi1>, <&msi2>, <&msi3>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pcie@3600000 {
+ compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
+ 0x50 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pme", "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <2>;
+ num-ib-windows = <6>;
+ num-ob-windows = <6>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&msi1>, <&msi2>, <&msi3>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ serdes1: serdes@1ea0000 {
+ reg = <0x0 0x1ea0000 0 0x00002000>;
+ compatible = "fsl,serdes-10g";
+ };
+
};
reserved-memory {
@@ -689,6 +778,13 @@
no-map;
};
};
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
};
#include "qoriq-qman-portals.dtsi"
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for NXP LS1088A QDS Board.
*
@@ -5,43 +6,6 @@
*
* Harninder Rai <harninder.rai@nxp.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -134,6 +98,30 @@
};
};
+&qspi {
+ status = "okay";
+ fsl,qspi-has-second-chip;
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ };
+
+ qflash1: s25fs512s@1 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ reg = <1>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ };
+};
+
&duart0 {
status = "okay";
};
@@ -149,3 +137,29 @@
&sata {
status = "okay";
};
+
+&pcs_mdio1 {
+ pcs_phy1: ethernet-phy@0 {
+ backplane-mode = "10gbase-kr";
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ fsl,lane-handle = <&serdes1>;
+ fsl,lane-reg = <0x840 0x40>;/* lane B */
+ };
+};
+
+&pcs_mdio2 {
+ pcs_phy2: ethernet-phy@0 {
+ backplane-mode = "10gbase-kr";
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ fsl,lane-handle = <&serdes1>;
+ fsl,lane-reg = <0x800 0x40>;/* lane A */
+ };
+};
+
+/* Update DPMAC connections to backplane PHYs, under SerDes 0x1D_0xXX.
+ * &dpmac1 {
+ * phy-handle = <&pcs_phy1>;
+ * };
+ */
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for NXP LS1088A RDB Board.
*
@@ -5,43 +6,6 @@
*
* Harninder Rai <harninder.rai@nxp.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -110,6 +74,31 @@
};
};
+&qspi {
+ status = "okay";
+ fsl,qspi-has-second-chip;
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ };
+
+ qflash1: s25fs512s@1 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ reg = <1>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ };
+
+};
+
&duart0 {
status = "okay";
};
@@ -118,6 +107,14 @@
status = "okay";
};
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
&esdhc {
status = "okay";
};
@@ -125,3 +122,82 @@
&sata {
status = "okay";
};
+
+&emdio1 {
+ /* Freescale F104 PHY1 */
+ mdio1_phy1: emdio1_phy@1 {
+ reg = <0x1c>;
+ phy-connection-type = "qsgmii";
+ };
+ mdio1_phy2: emdio1_phy@2 {
+ reg = <0x1d>;
+ phy-connection-type = "qsgmii";
+ };
+ mdio1_phy3: emdio1_phy@3 {
+ reg = <0x1e>;
+ phy-connection-type = "qsgmii";
+ };
+ mdio1_phy4: emdio1_phy@4 {
+ reg = <0x1f>;
+ phy-connection-type = "qsgmii";
+ };
+ /* F104 PHY2 */
+ mdio1_phy5: emdio1_phy@5 {
+ reg = <0x0c>;
+ phy-connection-type = "qsgmii";
+ };
+ mdio1_phy6: emdio1_phy@6 {
+ reg = <0x0d>;
+ phy-connection-type = "qsgmii";
+ };
+ mdio1_phy7: emdio1_phy@7 {
+ reg = <0x0e>;
+ phy-connection-type = "qsgmii";
+ };
+ mdio1_phy8: emdio1_phy@8 {
+ reg = <0x0f>;
+ phy-connection-type = "qsgmii";
+ };
+};
+
+&emdio2 {
+ /* Aquantia AQR105 10G PHY */
+ mdio2_phy1: emdio2_phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 2 0x4>;
+ reg = <0x0>;
+ phy-connection-type = "xfi";
+ };
+};
+
+/* DPMAC connections to external PHYs
+ * based on LS1088A RM RevC - $24.1.2 SerDes Options
+ */
+/* DPMAC1 is 10G SFP+, fixed link */
+&dpmac2 {
+ phy-handle = <&mdio2_phy1>;
+};
+&dpmac3 {
+ phy-handle = <&mdio1_phy5>;
+};
+&dpmac4 {
+ phy-handle = <&mdio1_phy6>;
+};
+&dpmac5 {
+ phy-handle = <&mdio1_phy7>;
+};
+&dpmac6 {
+ phy-handle = <&mdio1_phy8>;
+};
+&dpmac7 {
+ phy-handle = <&mdio1_phy1>;
+};
+&dpmac8 {
+ phy-handle = <&mdio1_phy2>;
+};
+&dpmac9 {
+ phy-handle = <&mdio1_phy3>;
+};
+&dpmac10 {
+ phy-handle = <&mdio1_phy4>;
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for NXP Layerscape-1088A family SoC.
*
@@ -5,43 +6,6 @@
*
* Harninder Rai <harninder.rai@nxp.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@@ -130,7 +94,7 @@
CPU_PH20: cpu-ph20 {
compatible = "arm,idle-state";
idle-state-name = "PH20";
- arm,psci-suspend-param = <0x00010000>;
+ arm,psci-suspend-param = <0x0>;
entry-latency-us = <1000>;
exit-latency-us = <1000>;
min-residency-us = <3000>;
@@ -147,6 +111,15 @@
<0x0 0x0c0d0000 0 0x1000>, /* GICH */
<0x0 0x0c0e0000 0 0x20000>; /* GICV */
interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ its: gic-its@6020000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x0 0x6020000 0 0x20000>;
+ };
};
timer {
@@ -169,11 +142,31 @@
clock-output-names = "sysclk";
};
+ dcfg: dcfg@1e00000 {
+ compatible = "fsl,ls1088a-dcfg", "syscon";
+ reg = <0x0 0x1e00000 0x0 0x10000>;
+ little-endian;
+ };
+
+ rstcr: syscon@1e60000 {
+ compatible = "fsl,ls1088a-rstcr", "syscon";
+ reg = <0x0 0x1e60000 0x0 0x4>;
+ };
+
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&rstcr>;
+ offset = <0x0>;
+ mask = <0x02>;
+ };
+
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
+ dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
clockgen: clocking@1300000 {
compatible = "fsl,ls1088a-clockgen";
@@ -283,6 +276,62 @@
status = "disabled";
};
+ cluster1_core0_watchdog: wdt@c000000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc000000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster1_core1_watchdog: wdt@c010000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc010000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster1_core2_watchdog: wdt@c020000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc020000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster1_core3_watchdog: wdt@c030000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc030000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster2_core0_watchdog: wdt@c100000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc100000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster2_core1_watchdog: wdt@c110000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc110000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster2_core2_watchdog: wdt@c120000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc120000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster2_core3_watchdog: wdt@c130000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc130000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
gpio0: gpio@2300000 {
compatible = "fsl,qoriq-gpio";
reg = <0x0 0x2300000 0x0 0x10000>;
@@ -323,6 +372,72 @@
#interrupt-cells = <2>;
};
+ /* TODO: WRIOP (CCSR?) */
+ emdio1: mdio@0x8B96000 { /* WRIOP0: 0x8B8_0000,
+ * E-MDIO1: 0x1_6000
+ */
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8B96000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian; /* force the driver in LE mode */
+
+ /* Not necessary on the QDS, but needed on the RDB */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ emdio2: mdio@0x8B97000 { /* WRIOP0: 0x8B8_0000,
+ * E-MDIO2: 0x1_7000
+ */
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8B97000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian; /* force the driver in LE mode */
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio1: mdio@0x8c07000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c07000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio2: mdio@0x8c0b000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c0b000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio3: mdio@0x8c0f000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c0f000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio4: mdio@0x8c13000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c13000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
ifc: ifc@2240000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x2240000 0x0 0x20000>;
@@ -333,13 +448,22 @@
status = "disabled";
};
+ ftm0: ftm0@2800000 {
+ compatible = "fsl,ls1088a-ftm-alarm";
+ reg = <0x0 0x2800000 0x0 0x10000>,
+ <0x0 0x1e34050 0x0 0x4>;
+ reg-names = "ftm", "pmctrl";
+ interrupts = <0 44 4>;
+ };
+
i2c0: i2c@2000000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,vf610-i2c", "fsl,ls1088a-vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen 4 7>;
+ fsl-scl-gpio = <&gpio3 30 0>;
status = "disabled";
};
@@ -349,7 +473,7 @@
#size-cells = <0>;
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen 4 7>;
status = "disabled";
};
@@ -359,7 +483,7 @@
#size-cells = <0>;
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen 4 7>;
status = "disabled";
};
@@ -369,7 +493,7 @@
#size-cells = <0>;
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen 4 7>;
status = "disabled";
};
@@ -385,6 +509,26 @@
status = "disabled";
};
+ usb0: usb3@3100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 80 0x4>; /* Level high type */
+ dr_mode = "host";
+ configure-gfladj;
+ snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ };
+
+ usb1: usb3@3110000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <0 81 0x4>; /* Level high type */
+ dr_mode = "host";
+ configure-gfladj;
+ snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ };
+
sata: sata@3200000 {
compatible = "fsl,ls1088a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>,
@@ -395,6 +539,17 @@
dma-coherent;
status = "disabled";
};
+ qspi: quadspi@20c0000 {
+ compatible = "fsl,ls2080a-qspi", "fsl,ls1088a-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x20c0000 0x0 0x10000>,
+ <0x0 0x20000000 0x0 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <0 25 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "qspi_en", "qspi";
+ };
crypto: crypto@8000000 {
compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
@@ -434,6 +589,251 @@
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
};
};
+
+ pcie@3400000 {
+ compatible = "fsl,ls1088a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
+ 0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+ interrupt-names = "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pcie@3500000 {
+ compatible = "fsl,ls1088a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
+ 0x28 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+ interrupt-names = "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 114 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 0 0 115 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 0 0 116 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 0 0 117 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pcie@3600000 {
+ compatible = "fsl,ls1088a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
+ 0x30 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+ interrupt-names = "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <8>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 119 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 0 0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 0 0 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 0 0 122 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ fsl_mc: fsl-mc@80c000000 {
+ compatible = "fsl,qoriq-mc";
+ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
+ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+ msi-parent = <&its>;
+ iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */
+ dma-coherent;
+ #address-cells = <3>;
+ #size-cells = <1>;
+
+ /*
+ * Region type 0x0 - MC portals
+ * Region type 0x1 - QBMAN portals
+ */
+ ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+ 0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+ dpmacs {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpmac1: dpmac@1 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <1>;
+ };
+
+ dpmac2: dpmac@2 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <2>;
+ };
+
+ dpmac3: dpmac@3 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <3>;
+ };
+
+ dpmac4: dpmac@4 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <4>;
+ };
+
+ dpmac5: dpmac@5 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <5>;
+ };
+
+ dpmac6: dpmac@6 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <6>;
+ };
+
+ dpmac7: dpmac@7 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <7>;
+ };
+
+ dpmac8: dpmac@8 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <8>;
+ };
+
+ dpmac9: dpmac@9 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <9>;
+ };
+
+ dpmac10: dpmac@a {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xa>;
+ };
+ };
+ };
+
+ smmu: iommu@5000000 {
+ compatible = "arm,mmu-500";
+ reg = <0 0x5000000 0 0x800000>;
+ #global-interrupts = <12>;
+ #iommu-cells = <1>;
+ stream-match-mask = <0x7C00>;
+ interrupts = <0 13 4>, /* global secure fault */
+ <0 14 4>, /* combined secure interrupt */
+ <0 15 4>, /* global non-secure fault */
+ <0 16 4>, /* combined non-secure interrupt */
+ /* performance counter interrupts 0-7 */
+ <0 211 4>,
+ <0 212 4>,
+ <0 213 4>,
+ <0 214 4>,
+ <0 215 4>,
+ <0 216 4>,
+ <0 217 4>,
+ <0 218 4>,
+ /* per context interrupt, 64 interrupts */
+ <0 146 4>,
+ <0 147 4>,
+ <0 148 4>,
+ <0 149 4>,
+ <0 150 4>,
+ <0 151 4>,
+ <0 152 4>,
+ <0 153 4>,
+ <0 154 4>,
+ <0 155 4>,
+ <0 156 4>,
+ <0 157 4>,
+ <0 158 4>,
+ <0 159 4>,
+ <0 160 4>,
+ <0 161 4>,
+ <0 162 4>,
+ <0 163 4>,
+ <0 164 4>,
+ <0 165 4>,
+ <0 166 4>,
+ <0 167 4>,
+ <0 168 4>,
+ <0 169 4>,
+ <0 170 4>,
+ <0 171 4>,
+ <0 172 4>,
+ <0 173 4>,
+ <0 174 4>,
+ <0 175 4>,
+ <0 176 4>,
+ <0 177 4>,
+ <0 178 4>,
+ <0 179 4>,
+ <0 180 4>,
+ <0 181 4>,
+ <0 182 4>,
+ <0 183 4>,
+ <0 184 4>,
+ <0 185 4>,
+ <0 186 4>,
+ <0 187 4>,
+ <0 188 4>,
+ <0 189 4>,
+ <0 190 4>,
+ <0 191 4>,
+ <0 192 4>,
+ <0 193 4>,
+ <0 194 4>,
+ <0 195 4>,
+ <0 196 4>,
+ <0 197 4>,
+ <0 198 4>,
+ <0 199 4>,
+ <0 200 4>,
+ <0 201 4>,
+ <0 202 4>,
+ <0 203 4>,
+ <0 204 4>,
+ <0 205 4>,
+ <0 206 4>,
+ <0 207 4>,
+ <0 208 4>,
+ <0 209 4>;
+ };
+
+ serdes1: serdes@1ea0000 {
+ reg = <0x0 0x1ea0000 0 0x00002000>;
+ compatible = "fsl,serdes-10g";
+ };
};
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
};
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Freescale LS2080a QDS Board.
*
@@ -7,43 +8,6 @@
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -59,3 +23,65 @@
stdout-path = "serial0:115200n8";
};
};
+
+&ifc {
+ boardctrl: board-control@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,tetra-fpga", "fsl,fpga-qixis", "simple-bus";
+ reg = <3 0 0x300>; /* TODO check address */
+ ranges = <0 3 0 0x300>;
+
+ mdio_mux_emi1 {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&emdio1>;
+ reg = <0x54 1>; /* BRDCFG4 */
+ mux-mask = <0xe0>; /* EMI1_MDIO */
+
+ #address-cells=<1>;
+ #size-cells = <0>;
+
+ /* Child MDIO buses, one for each riser card:
+ * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
+ * VSC8234 PHYs on the riser cards.
+ */
+
+ mdio_mux3: mdio@60 {
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio0_phy12: mdio_phy0@1c {
+ reg = <0x1c>;
+ phy-connection-type = "sgmii";
+ };
+ mdio0_phy13: mdio_phy1@1d {
+ reg = <0x1d>;
+ phy-connection-type = "sgmii";
+ };
+ mdio0_phy14: mdio_phy2@1e {
+ reg = <0x1e>;
+ phy-connection-type = "sgmii";
+ };
+ mdio0_phy15: mdio_phy3@1f {
+ reg = <0x1f>;
+ phy-connection-type = "sgmii";
+ };
+ };
+ };
+ };
+};
+
+/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
+&dpmac9 {
+ phy-handle = <&mdio0_phy12>;
+};
+&dpmac10 {
+ phy-handle = <&mdio0_phy13>;
+};
+&dpmac11 {
+ phy-handle = <&mdio0_phy14>;
+};
+&dpmac12 {
+ phy-handle = <&mdio0_phy15>;
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Freescale LS2080a RDB Board.
*
@@ -7,43 +8,6 @@
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -59,3 +23,83 @@
stdout-path = "serial1:115200n8";
};
};
+
+&emdio1 {
+ status = "disabled";
+ /* CS4340 PHYs */
+ mdio1_phy1: emdio1_phy@1 {
+ reg = <0x10>;
+ phy-connection-type = "xfi";
+ };
+ mdio1_phy2: emdio1_phy@2 {
+ reg = <0x11>;
+ phy-connection-type = "xfi";
+ };
+ mdio1_phy3: emdio1_phy@3 {
+ reg = <0x12>;
+ phy-connection-type = "xfi";
+ };
+ mdio1_phy4: emdio1_phy@4 {
+ reg = <0x13>;
+ phy-connection-type = "xfi";
+ };
+};
+
+&emdio2 {
+ /* AQR405 PHYs */
+ mdio2_phy1: emdio2_phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 1 0x4>; /* Level high type */
+ reg = <0x0>;
+ phy-connection-type = "xfi";
+ };
+ mdio2_phy2: emdio2_phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 2 0x4>; /* Level high type */
+ reg = <0x1>;
+ phy-connection-type = "xfi";
+ };
+ mdio2_phy3: emdio2_phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 4 0x4>; /* Level high type */
+ reg = <0x2>;
+ phy-connection-type = "xfi";
+ };
+ mdio2_phy4: emdio2_phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 5 0x4>; /* Level high type */
+ reg = <0x3>;
+ phy-connection-type = "xfi";
+ };
+};
+
+/* Update DPMAC connections to external PHYs, under the assumption of
+ * SerDes 0x2a_0x41. This is currently the only SerDes supported on the board.
+ */
+/* Leave Cortina nodes commented out until driver is integrated
+ *&dpmac1 {
+ * phy-handle = <&mdio1_phy1>;
+ *};
+ *&dpmac2 {
+ * phy-handle = <&mdio1_phy2>;
+ *};
+ *&dpmac3 {
+ * phy-handle = <&mdio1_phy3>;
+ *};
+ *&dpmac4 {
+ * phy-handle = <&mdio1_phy4>;
+ *};
+ */
+
+&dpmac5 {
+ phy-handle = <&mdio2_phy1>;
+};
+&dpmac6 {
+ phy-handle = <&mdio2_phy2>;
+};
+&dpmac7 {
+ phy-handle = <&mdio2_phy3>;
+};
+&dpmac8 {
+ phy-handle = <&mdio2_phy4>;
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Freescale LS2080a software Simulator model
*
@@ -5,43 +6,6 @@
*
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Freescale Layerscape-2080A family SoC.
*
@@ -6,43 +7,6 @@
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "fsl-ls208xa.dtsi"
@@ -150,6 +114,10 @@
};
};
+&timer {
+ fsl,erratum-a008585;
+};
+
&pcie1 {
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x10 0x00000000 0x0 0x00002000>; /* configuration space */
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
@@ -0,0 +1,163 @@
+/*
+ * Device Tree file for NXP LS2081A RDB Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Priyanka Jain <priyanka.jain@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2088a.dtsi"
+
+/ {
+ model = "NXP Layerscape 2081A RDB Board";
+ compatible = "fsl,ls2081a-rdb", "fsl,ls2081a";
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+};
+
+&esdhc {
+ status = "okay";
+};
+
+&ifc {
+ status = "disabled";
+};
+
+&i2c0 {
+ status = "okay";
+ pca9547@75 {
+ compatible = "nxp,pca9547";
+ reg = <0x75>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x01>;
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x02>;
+
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <500>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ adt7481@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+ };
+ };
+};
+
+&dspi {
+ status = "okay";
+ dflash0: n25q512a {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <3000000>;
+ reg = <0>;
+ };
+};
+
+&qspi {
+ status = "okay";
+ fsl,qspi-has-second-chip;
+ flash0: s25fs512s@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,m25p80";
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+ flash1: s25fs512s@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ compatible = "spansion,m25p80";
+ spi-max-frequency = <20000000>;
+ reg = <1>;
+ };
+};
+
+&sata0 {
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Freescale LS2088A QDS Board.
*
@@ -6,43 +7,6 @@
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -58,3 +22,123 @@
stdout-path = "serial0:115200n8";
};
};
+
+&ifc {
+ boardctrl: board-control@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,tetra-fpga", "fsl,fpga-qixis", "simple-bus";
+ reg = <3 0 0x300>; /* TODO check address */
+ ranges = <0 3 0 0x300>;
+
+ mdio_mux_emi1 {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&emdio1>;
+ reg = <0x54 1>; /* BRDCFG4 */
+ mux-mask = <0xe0>; /* EMI1_MDIO */
+
+ #address-cells=<1>;
+ #size-cells = <0>;
+
+ /* Child MDIO buses, one for each riser card:
+ * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
+ * VSC8234 PHYs on the riser cards.
+ */
+
+ mdio_mux3: mdio@60 {
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio0_phy12: mdio_phy0@1c {
+ reg = <0x1c>;
+ phy-connection-type = "sgmii";
+ };
+ mdio0_phy13: mdio_phy1@1d {
+ reg = <0x1d>;
+ phy-connection-type = "sgmii";
+ };
+ mdio0_phy14: mdio_phy2@1e {
+ reg = <0x1e>;
+ phy-connection-type = "sgmii";
+ };
+ mdio0_phy15: mdio_phy3@1f {
+ reg = <0x1f>;
+ phy-connection-type = "sgmii";
+ };
+ };
+ };
+ };
+};
+
+&pcs_mdio1 {
+ pcs_phy1: ethernet-phy@0 {
+ backplane-mode = "10gbase-kr";
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ fsl,lane-handle = <&serdes1>;
+ fsl,lane-reg = <0x9C0 0x40>;/* lane H */
+ };
+};
+
+&pcs_mdio2 {
+ pcs_phy2: ethernet-phy@0 {
+ backplane-mode = "10gbase-kr";
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ fsl,lane-handle = <&serdes1>;
+ fsl,lane-reg = <0x980 0x40>;/* lane G */
+ };
+};
+
+&pcs_mdio3 {
+ pcs_phy3: ethernet-phy@0 {
+ backplane-mode = "10gbase-kr";
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ fsl,lane-handle = <&serdes1>;
+ fsl,lane-reg = <0x940 0x40>;/* lane F */
+ };
+};
+
+&pcs_mdio4 {
+ pcs_phy4: ethernet-phy@0 {
+ backplane-mode = "10gbase-kr";
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ fsl,lane-handle = <&serdes1>;
+ fsl,lane-reg = <0x900 0x40>;/* lane E */
+ };
+};
+
+/* Update DPMAC connections to backplane PHYs, under SerDes 0x2a_0xXX.
+ * &dpmac1 {
+ * phy-handle = <&pcs_phy1>;
+ * };
+ *
+ * &dpmac2 {
+ * phy-handle = <&pcs_phy2>;
+ * };
+ *
+ * &dpmac3 {
+ * phy-handle = <&pcs_phy3>;
+ * };
+ *
+ * &dpmac4 {
+ * phy-handle = <&pcs_phy4>;
+ * };
+ */
+
+/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
+&dpmac9 {
+ phy-handle = <&mdio0_phy12>;
+};
+&dpmac10 {
+ phy-handle = <&mdio0_phy13>;
+};
+&dpmac11 {
+ phy-handle = <&mdio0_phy14>;
+};
+&dpmac12 {
+ phy-handle = <&mdio0_phy15>;
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Freescale LS2088A RDB Board.
*
@@ -6,43 +7,6 @@
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -58,3 +22,83 @@
stdout-path = "serial1:115200n8";
};
};
+
+&emdio1 {
+ status = "disabled";
+ /* CS4340 PHYs */
+ mdio1_phy1: emdio1_phy@1 {
+ reg = <0x10>;
+ phy-connection-type = "xfi";
+ };
+ mdio1_phy2: emdio1_phy@2 {
+ reg = <0x11>;
+ phy-connection-type = "xfi";
+ };
+ mdio1_phy3: emdio1_phy@3 {
+ reg = <0x12>;
+ phy-connection-type = "xfi";
+ };
+ mdio1_phy4: emdio1_phy@4 {
+ reg = <0x13>;
+ phy-connection-type = "xfi";
+ };
+};
+
+&emdio2 {
+ /* AQR405 PHYs */
+ mdio2_phy1: emdio2_phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 1 0x4>; /* Level high type */
+ reg = <0x0>;
+ phy-connection-type = "xfi";
+ };
+ mdio2_phy2: emdio2_phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 2 0x4>; /* Level high type */
+ reg = <0x1>;
+ phy-connection-type = "xfi";
+ };
+ mdio2_phy3: emdio2_phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 4 0x4>; /* Level high type */
+ reg = <0x2>;
+ phy-connection-type = "xfi";
+ };
+ mdio2_phy4: emdio2_phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 5 0x4>; /* Level high type */
+ reg = <0x3>;
+ phy-connection-type = "xfi";
+ };
+};
+
+/* Update DPMAC connections to external PHYs, under the assumption of
+ * SerDes 0x2a_0x41. This is currently the only SerDes supported on the board.
+ */
+/* Leave Cortina PHYs commented out until proper driver is integrated
+ *&dpmac1 {
+ * phy-handle = <&mdio1_phy1>;
+ *};
+ *&dpmac2 {
+ * phy-handle = <&mdio1_phy2>;
+ *};
+ *&dpmac3 {
+ * phy-handle = <&mdio1_phy3>;
+ *};
+ *&dpmac4 {
+ * phy-handle = <&mdio1_phy4>;
+ *};
+ */
+
+&dpmac5 {
+ phy-handle = <&mdio2_phy1>;
+};
+&dpmac6 {
+ phy-handle = <&mdio2_phy2>;
+};
+&dpmac7 {
+ phy-handle = <&mdio2_phy3>;
+};
+&dpmac8 {
+ phy-handle = <&mdio2_phy4>;
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Freescale Layerscape-2088A family SoC.
*
@@ -6,43 +7,6 @@
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "fsl-ls208xa.dtsi"
@@ -143,7 +107,7 @@
CPU_PW20: cpu-pw20 {
compatible = "arm,idle-state";
idle-state-name = "PW20";
- arm,psci-suspend-param = <0x00010000>;
+ arm,psci-suspend-param = <0x0>;
entry-latency-us = <2000>;
exit-latency-us = <2000>;
min-residency-us = <6000>;
@@ -151,6 +115,7 @@
};
&pcie1 {
+ compatible = "fsl,ls2088a-pcie", "snps,dw-pcie";
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x20 0x00000000 0x0 0x00002000>; /* configuration space */
@@ -159,6 +124,7 @@
};
&pcie2 {
+ compatible = "fsl,ls2088a-pcie", "snps,dw-pcie";
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x28 0x00000000 0x0 0x00002000>; /* configuration space */
@@ -167,6 +133,7 @@
};
&pcie3 {
+ compatible = "fsl,ls2088a-pcie", "snps,dw-pcie";
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x30 0x00000000 0x0 0x00002000>; /* configuration space */
@@ -175,6 +142,7 @@
};
&pcie4 {
+ compatible = "fsl,ls2088a-pcie", "snps,dw-pcie";
reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
0x38 0x00000000 0x0 0x00002000>; /* configuration space */
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Freescale LS2080A QDS Board.
*
@@ -6,43 +7,6 @@
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
&esdhc {
@@ -165,16 +129,21 @@
&qspi {
status = "okay";
+ fsl,qspi-has-second-chip;
flash0: s25fl256s1@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
spi-max-frequency = <20000000>;
reg = <0>;
};
flash2: s25fl256s1@2 {
#address-cells = <1>;
#size-cells = <1>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
compatible = "st,m25p80";
spi-max-frequency = <20000000>;
reg = <0>;
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Freescale LS2080A RDB Board.
*
@@ -6,43 +7,6 @@
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
&esdhc {
@@ -85,6 +49,7 @@
reg = <0x75>;
#address-cells = <1>;
#size-cells = <0>;
+ i2c-mux-never-disable;
i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -95,6 +60,17 @@
};
};
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x02>;
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <500>;
+ };
+ };
+
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
@@ -132,7 +108,15 @@
};
&qspi {
- status = "disabled";
+ status = "okay";
+ flash0: s25fs512s@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,m25p80";
+ m25p,fast-read;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
};
&sata0 {
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Freescale Layerscape-2080A family SoC.
*
@@ -6,43 +7,6 @@
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/thermal/thermal.h>
@@ -111,13 +75,12 @@
mask = <0x2>;
};
- timer {
+ timer: timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
<1 14 4>, /* Physical Non-Secure PPI, active-low */
<1 11 4>, /* Virtual PPI, active-low */
<1 10 4>; /* Hypervisor PPI, active-low */
- fsl,erratum-a008585;
};
pmu {
@@ -135,6 +98,7 @@
#address-cells = <2>;
#size-cells = <2>;
ranges;
+ dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
clockgen: clocking@1300000 {
compatible = "fsl,ls2080a-clockgen";
@@ -357,6 +321,8 @@
reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
<0x00000000 0x08340000 0 0x40000>; /* MC control reg */
msi-parent = <&its>;
+ iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */
+ dma-coherent;
#address-cells = <3>;
#size-cells = <1>;
@@ -460,6 +426,8 @@
compatible = "arm,mmu-500";
reg = <0 0x5000000 0 0x800000>;
#global-interrupts = <12>;
+ #iommu-cells = <1>;
+ stream-match-mask = <0x7C00>;
interrupts = <0 13 4>, /* global secure fault */
<0 14 4>, /* combined secure interrupt */
<0 15 4>, /* global non-secure fault */
@@ -502,7 +470,6 @@
<0 204 4>, <0 205 4>,
<0 206 4>, <0 207 4>,
<0 208 4>, <0 209 4>;
- mmu-masters = <&fsl_mc 0x300 0>;
};
dspi: dspi@2100000 {
@@ -574,15 +541,126 @@
#interrupt-cells = <2>;
};
+ /* TODO: WRIOP (CCSR?) */
+ emdio1: mdio@0x8B96000 { /* WRIOP0: 0x8B8_0000,
+ * E-MDIO1: 0x1_6000
+ */
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8B96000 0x0 0x1000>;
+ device_type = "mdio"; /* TODO: is this necessary? */
+ little-endian; /* force the driver in LE mode */
+
+ /* Not necessary on the QDS, but needed on the RDB */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ emdio2: mdio@0x8B97000 { /* WRIOP0: 0x8B8_0000,
+ * E-MDIO2: 0x1_7000
+ */
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8B97000 0x0 0x1000>;
+ device_type = "mdio"; /* TODO: is this necessary? */
+ little-endian; /* force the driver in LE mode */
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio1: mdio@0x8c07000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c07000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio2: mdio@0x8c0b000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c0b000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio3: mdio@0x8c0f000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c0f000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio4: mdio@0x8c13000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c13000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio5: mdio@0x8c17000 {
+ status = "disabled";
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c17000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio6: mdio@0x8c1b000 {
+ status = "disabled";
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c1b000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio7: mdio@0x8c1f000 {
+ status = "disabled";
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c1f000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio8: mdio@0x8c23000 {
+ status = "disabled";
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c23000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
i2c0: i2c@2000000 {
status = "disabled";
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,vf610-i2c", "fsl,ls208xa-vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <0 34 0x4>; /* Level high type */
clock-names = "i2c";
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen 4 1>;
+ fsl-scl-gpio = <&gpio3 10 0>;
};
i2c1: i2c@2010000 {
@@ -593,7 +671,7 @@
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <0 34 0x4>; /* Level high type */
clock-names = "i2c";
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen 4 1>;
};
i2c2: i2c@2020000 {
@@ -604,7 +682,7 @@
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <0 35 0x4>; /* Level high type */
clock-names = "i2c";
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen 4 1>;
};
i2c3: i2c@2030000 {
@@ -615,7 +693,7 @@
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <0 35 0x4>; /* Level high type */
clock-names = "i2c";
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen 4 1>;
};
ifc: ifc@2240000 {
@@ -648,8 +726,8 @@
compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
"snps,dw-pcie";
reg-names = "regs", "config";
- interrupts = <0 108 0x4>; /* Level high type */
- interrupt-names = "intr";
+ interrupts = <0 108 0x4>; /* aer interrupt */
+ interrupt-names = "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -657,6 +735,7 @@
num-lanes = <4>;
bus-range = <0x0 0xff>;
msi-parent = <&its>;
+ iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
@@ -669,8 +748,8 @@
compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
"snps,dw-pcie";
reg-names = "regs", "config";
- interrupts = <0 113 0x4>; /* Level high type */
- interrupt-names = "intr";
+ interrupts = <0 113 0x4>; /* aer interrupt */
+ interrupt-names = "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -678,6 +757,7 @@
num-lanes = <4>;
bus-range = <0x0 0xff>;
msi-parent = <&its>;
+ iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
@@ -690,8 +770,8 @@
compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
"snps,dw-pcie";
reg-names = "regs", "config";
- interrupts = <0 118 0x4>; /* Level high type */
- interrupt-names = "intr";
+ interrupts = <0 118 0x4>; /* aer interrupt */
+ interrupt-names = "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -699,6 +779,7 @@
num-lanes = <8>;
bus-range = <0x0 0xff>;
msi-parent = <&its>;
+ iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
@@ -711,8 +792,8 @@
compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
"snps,dw-pcie";
reg-names = "regs", "config";
- interrupts = <0 123 0x4>; /* Level high type */
- interrupt-names = "intr";
+ interrupts = <0 123 0x4>; /* aer interrupt */
+ interrupt-names = "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -720,6 +801,7 @@
num-lanes = <4>;
bus-range = <0x0 0xff>;
msi-parent = <&its>;
+ iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
@@ -754,6 +836,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb3@3110000 {
@@ -764,6 +847,12 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ };
+
+ serdes1: serdes@1ea0000 {
+ reg = <0x0 0x1ea0000 0 0x00002000>;
+ compatible = "fsl,serdes-10g";
};
ccn@4000000 {
@@ -771,6 +860,14 @@
reg = <0x0 0x04000000 0x0 0x01000000>;
interrupts = <0 12 4>;
};
+
+ ftm0: ftm0@2800000 {
+ compatible = "fsl,ls208xa-ftm-alarm";
+ reg = <0x0 0x2800000 0x0 0x10000>,
+ <0x0 0x1e34050 0x0 0x4>;
+ reg-names = "ftm", "pmctrl";
+ interrupts = <0 44 4>;
+ };
};
ddr1: memory-controller@1080000 {
@@ -786,4 +883,11 @@
interrupts = <0 18 0x4>;
little-endian;
};
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals-sdk.dtsi
@@ -0,0 +1,55 @@
+/*
+ * QorIQ BMan SDK Portals device tree nodes
+ *
+ * Copyright 2011-2016 Freescale Semiconductor Inc.
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+&bportals {
+ bman-portal@0 {
+ cell-index = <0>;
+ };
+
+ bman-portal@10000 {
+ cell-index = <1>;
+ };
+
+ bman-portal@20000 {
+ cell-index = <2>;
+ };
+
+ bman-portal@30000 {
+ cell-index = <3>;
+ };
+
+ bman-portal@40000 {
+ cell-index = <4>;
+ };
+
+ bman-portal@50000 {
+ cell-index = <5>;
+ };
+
+ bman-portal@60000 {
+ cell-index = <6>;
+ };
+
+ bman-portal@70000 {
+ cell-index = <7>;
+ };
+
+ bman-portal@80000 {
+ cell-index = <8>;
+ };
+
+ bman-portal@90000 {
+ cell-index = <9>;
+ };
+
+ bman-bpids@0 {
+ compatible = "fsl,bpid-range";
+ fsl,bpid-range = <32 32>;
+ };
+};
--- a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* QorIQ BMan Portals device tree
*
* Copyright 2011-2016 Freescale Semiconductor Inc.
*
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
*/
&bportals {
@@ -68,4 +68,10 @@
reg = <0x80000 0x4000>, <0x4080000 0x4000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ bman-portal@90000 {
+ compatible = "fsl,bman-portal";
+ reg = <0x90000 0x4000>, <0x4090000 0x4000>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-dpaa-eth.dtsi
@@ -0,0 +1,97 @@
+/*
+ * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fsldpaa: fsl,dpaa {
+ compatible = "fsl,ls1043a-dpaa", "simple-bus", "fsl,dpaa";
+ ethernet@0 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&enet0>;
+ dma-coherent;
+ };
+ ethernet@1 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&enet1>;
+ dma-coherent;
+ };
+ ethernet@2 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&enet2>;
+ dma-coherent;
+ };
+ ethernet@3 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&enet3>;
+ dma-coherent;
+ };
+ ethernet@4 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&enet4>;
+ dma-coherent;
+ };
+ ethernet@5 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&enet5>;
+ dma-coherent;
+ };
+ ethernet@8 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&enet6>;
+ dma-coherent;
+ };
+ ethernet@6 {
+ compatible = "fsl,im-ethernet";
+ fsl,fman-mac = <&enet2>;
+ dma-coherent;
+ fpmevt-sel = <0>;
+ };
+ ethernet@7 {
+ compatible = "fsl,im-ethernet";
+ fsl,fman-mac = <&enet3>;
+ dma-coherent;
+ fpmevt-sel = <1>;
+ };
+ ethernet@10 {
+ compatible = "fsl,im-ethernet";
+ fsl,fman-mac = <&enet4>;
+ dma-coherent;
+ fpmevt-sel = <2>;
+ };
+ ethernet@11 {
+ compatible = "fsl,im-ethernet";
+ fsl,fman-mac = <&enet5>;
+ dma-coherent;
+ fpmevt-sel = <3>;
+ };
+};
+
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
@@ -1,27 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* QorIQ FMan v3 10g port #0 device tree
*
* Copyright 2012-2015 Freescale Semiconductor Inc.
*
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
*/
fman@1a00000 {
fman0_rx_0x10: port@90000 {
cell-index = <0x10>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx";
reg = <0x90000 0x1000>;
fsl,fman-10g-port;
};
fman0_tx_0x30: port@b0000 {
cell-index = <0x30>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-10g-tx";
reg = <0xb0000 0x1000>;
fsl,fman-10g-port;
+ fsl,qman-channel-id = <0x800>;
};
- ethernet@f0000 {
+ mac9: ethernet@f0000 {
cell-index = <0x8>;
compatible = "fsl,fman-memac";
reg = <0xf0000 0x1000>;
@@ -29,7 +30,7 @@ fman@1a00000 {
pcsphy-handle = <&pcsphy6>;
};
- mdio@f1000 {
+ mdio9: mdio@f1000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
@@ -1,27 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* QorIQ FMan v3 10g port #1 device tree
*
* Copyright 2012-2015 Freescale Semiconductor Inc.
*
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
*/
fman@1a00000 {
fman0_rx_0x11: port@91000 {
cell-index = <0x11>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx";
reg = <0x91000 0x1000>;
fsl,fman-10g-port;
};
fman0_tx_0x31: port@b1000 {
cell-index = <0x31>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-10g-tx";
reg = <0xb1000 0x1000>;
fsl,fman-10g-port;
+ fsl,qman-channel-id = <0x801>;
};
- ethernet@f2000 {
+ mac10: ethernet@f2000 {
cell-index = <0x9>;
compatible = "fsl,fman-memac";
reg = <0xf2000 0x1000>;
@@ -29,7 +30,7 @@ fman@1a00000 {
pcsphy-handle = <&pcsphy7>;
};
- mdio@f3000 {
+ mdio10: mdio@f3000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
@@ -1,22 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* QorIQ FMan v3 1g port #0 device tree
*
* Copyright 2012-2015 Freescale Semiconductor Inc.
*
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
*/
fman@1a00000 {
fman0_rx_0x08: port@88000 {
cell-index = <0x8>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx";
reg = <0x88000 0x1000>;
};
fman0_tx_0x28: port@a8000 {
cell-index = <0x28>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx";
reg = <0xa8000 0x1000>;
+ fsl,qman-channel-id = <0x802>;
};
ethernet@e0000 {
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
@@ -1,22 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* QorIQ FMan v3 1g port #1 device tree
*
* Copyright 2012-2015 Freescale Semiconductor Inc.
*
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
*/
fman@1a00000 {
fman0_rx_0x09: port@89000 {
cell-index = <0x9>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx";
reg = <0x89000 0x1000>;
};
fman0_tx_0x29: port@a9000 {
cell-index = <0x29>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx";
reg = <0xa9000 0x1000>;
+ fsl,qman-channel-id = <0x803>;
};
ethernet@e2000 {
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
@@ -1,22 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* QorIQ FMan v3 1g port #2 device tree
*
* Copyright 2012-2015 Freescale Semiconductor Inc.
*
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
*/
fman@1a00000 {
fman0_rx_0x0a: port@8a000 {
cell-index = <0xa>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx";
reg = <0x8a000 0x1000>;
};
fman0_tx_0x2a: port@aa000 {
cell-index = <0x2a>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx";
reg = <0xaa000 0x1000>;
+ fsl,qman-channel-id = <0x804>;
};
ethernet@e4000 {
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
@@ -1,22 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* QorIQ FMan v3 1g port #3 device tree
*
* Copyright 2012-2015 Freescale Semiconductor Inc.
*
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
*/
fman@1a00000 {
fman0_rx_0x0b: port@8b000 {
cell-index = <0xb>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx";
reg = <0x8b000 0x1000>;
};
fman0_tx_0x2b: port@ab000 {
cell-index = <0x2b>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx";
reg = <0xab000 0x1000>;
+ fsl,qman-channel-id = <0x805>;
};
ethernet@e6000 {
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
@@ -1,22 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* QorIQ FMan v3 1g port #4 device tree
*
* Copyright 2012-2015 Freescale Semiconductor Inc.
*
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
*/
fman@1a00000 {
fman0_rx_0x0c: port@8c000 {
cell-index = <0xc>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx";
reg = <0x8c000 0x1000>;
};
fman0_tx_0x2c: port@ac000 {
cell-index = <0x2c>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx";
reg = <0xac000 0x1000>;
+ fsl,qman-channel-id = <0x806>;
};
ethernet@e8000 {
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
@@ -1,22 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* QorIQ FMan v3 1g port #5 device tree
*
* Copyright 2012-2015 Freescale Semiconductor Inc.
*
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
*/
fman@1a00000 {
fman0_rx_0x0d: port@8d000 {
cell-index = <0xd>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx";
reg = <0x8d000 0x1000>;
};
fman0_tx_0x2d: port@ad000 {
cell-index = <0x2d>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx";
reg = <0xad000 0x1000>;
+ fsl,qman-channel-id = <0x807>;
};
ethernet@ea000 {
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-6oh.dtsi
@@ -0,0 +1,47 @@
+/*
+ * QorIQ FMan v3 OH ports device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+
+ fman0_oh1: port@82000 {
+ cell-index = <0>;
+ compatible = "fsl,fman-port-oh";
+ reg = <0x82000 0x1000>;
+ };
+
+ fman0_oh2: port@83000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-port-oh";
+ reg = <0x83000 0x1000>;
+ };
+
+ fman0_oh3: port@84000 {
+ cell-index = <2>;
+ compatible = "fsl,fman-port-oh";
+ reg = <0x84000 0x1000>;
+ };
+
+ fman0_oh4: port@85000 {
+ cell-index = <3>;
+ compatible = "fsl,fman-port-oh";
+ reg = <0x85000 0x1000>;
+ };
+
+ fman0_oh5: port@86000 {
+ cell-index = <4>;
+ compatible = "fsl,fman-port-oh";
+ reg = <0x86000 0x1000>;
+ };
+
+ fman0_oh6: port@87000 {
+ cell-index = <5>;
+ compatible = "fsl,fman-port-oh";
+ reg = <0x87000 0x1000>;
+ };
+
+};
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* QorIQ FMan v3 device tree
*
* Copyright 2012-2015 Freescale Semiconductor Inc.
*
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
*/
fman0: fman@1a00000 {
@@ -19,45 +19,95 @@ fman0: fman@1a00000 {
clock-names = "fmanclk";
fsl,qman-channel-range = <0x800 0x10>;
+ cc {
+ compatible = "fsl,fman-cc";
+ };
+
muram@0 {
compatible = "fsl,fman-muram";
reg = <0x0 0x60000>;
};
+ bmi@80000 {
+ compatible = "fsl,fman-bmi";
+ reg = <0x80000 0x400>;
+ };
+
+ qmi@80400 {
+ compatible = "fsl,fman-qmi";
+ reg = <0x80400 0x400>;
+ };
+
fman0_oh_0x2: port@82000 {
cell-index = <0x2>;
compatible = "fsl,fman-v3-port-oh";
reg = <0x82000 0x1000>;
+ fsl,qman-channel-id = <0x809>;
};
fman0_oh_0x3: port@83000 {
cell-index = <0x3>;
compatible = "fsl,fman-v3-port-oh";
reg = <0x83000 0x1000>;
+ fsl,qman-channel-id = <0x80a>;
};
fman0_oh_0x4: port@84000 {
cell-index = <0x4>;
compatible = "fsl,fman-v3-port-oh";
reg = <0x84000 0x1000>;
+ fsl,qman-channel-id = <0x80b>;
};
fman0_oh_0x5: port@85000 {
cell-index = <0x5>;
compatible = "fsl,fman-v3-port-oh";
reg = <0x85000 0x1000>;
+ fsl,qman-channel-id = <0x80c>;
};
fman0_oh_0x6: port@86000 {
cell-index = <0x6>;
compatible = "fsl,fman-v3-port-oh";
reg = <0x86000 0x1000>;
+ fsl,qman-channel-id = <0x80d>;
};
fman0_oh_0x7: port@87000 {
cell-index = <0x7>;
compatible = "fsl,fman-v3-port-oh";
reg = <0x87000 0x1000>;
+ fsl,qman-channel-id = <0x80e>;
+ };
+
+ policer@c0000 {
+ compatible = "fsl,fman-policer";
+ reg = <0xc0000 0x1000>;
+ };
+
+ keygen@c1000 {
+ compatible = "fsl,fman-keygen";
+ reg = <0xc1000 0x1000>;
+ };
+
+ dma@c2000 {
+ compatible = "fsl,fman-dma";
+ reg = <0xc2000 0x1000>;
+ };
+
+ fpm@c3000 {
+ compatible = "fsl,fman-fpm";
+ reg = <0xc3000 0x1000>;
+ };
+
+ parser@c7000 {
+ compatible = "fsl,fman-parser";
+ reg = <0xc7000 0x1000>;
+ };
+
+ vsps@dc000 {
+ compatible = "fsl,fman-vsps";
+ reg = <0xdc000 0x1000>;
};
mdio0: mdio@fc000 {
@@ -75,7 +125,7 @@ fman0: fman@1a00000 {
};
ptp_timer0: ptp-timer@fe000 {
- compatible = "fsl,fman-ptp-timer";
+ compatible = "fsl,fman-ptp-timer", "fsl,fman-rtc";
reg = <0xfe000 0x1000>;
};
};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals-sdk.dtsi
@@ -0,0 +1,38 @@
+/*
+ * QorIQ QMan SDK Portals device tree nodes
+ *
+ * Copyright 2011-2016 Freescale Semiconductor Inc.
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+&qportals {
+ qman-fqids@0 {
+ compatible = "fsl,fqid-range";
+ fsl,fqid-range = <256 256>;
+ };
+
+ qman-fqids@1 {
+ compatible = "fsl,fqid-range";
+ fsl,fqid-range = <32768 32768>;
+ };
+
+ qman-pools@0 {
+ compatible = "fsl,pool-channel-range";
+ fsl,pool-channel-range = <0x401 0xf>;
+ };
+
+ qman-cgrids@0 {
+ compatible = "fsl,cgrid-range";
+ fsl,cgrid-range = <0 256>;
+ };
+
+ qman-ceetm@0 {
+ compatible = "fsl,qman-ceetm";
+ fsl,ceetm-lfqid-range = <0xf00000 0x1000>;
+ fsl,ceetm-sp-range = <0 16>;
+ fsl,ceetm-lni-range = <0 8>;
+ fsl,ceetm-channel-range = <0 32>;
+ };
+};
--- a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* QorIQ QMan Portals device tree
*
* Copyright 2011-2016 Freescale Semiconductor Inc.
*
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
*/
&qportals {
@@ -77,4 +77,11 @@
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
cell-index = <8>;
};
+
+ qportal9: qman-portal@90000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x90000 0x4000>, <0x4090000 0x4000>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <9>;
+ };
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi
@@ -35,13 +35,13 @@
fman@400000 {
fman0_rx_0x10: port@90000 {
cell-index = <0x10>;
- compatible = "fsl,fman-v2-port-rx";
+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-10g-rx";
reg = <0x90000 0x1000>;
};
fman0_tx_0x30: port@b0000 {
cell-index = <0x30>;
- compatible = "fsl,fman-v2-port-tx";
+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-10g-tx";
reg = <0xb0000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi
@@ -35,13 +35,13 @@
fman@400000 {
fman0_rx_0x08: port@88000 {
cell-index = <0x8>;
- compatible = "fsl,fman-v2-port-rx";
+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx";
reg = <0x88000 0x1000>;
};
fman0_tx_0x28: port@a8000 {
cell-index = <0x28>;
- compatible = "fsl,fman-v2-port-tx";
+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx";
reg = <0xa8000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi
@@ -35,13 +35,13 @@
fman@400000 {
fman0_rx_0x09: port@89000 {
cell-index = <0x9>;
- compatible = "fsl,fman-v2-port-rx";
+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx";
reg = <0x89000 0x1000>;
};
fman0_tx_0x29: port@a9000 {
cell-index = <0x29>;
- compatible = "fsl,fman-v2-port-tx";
+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx";
reg = <0xa9000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi
@@ -35,13 +35,13 @@
fman@400000 {
fman0_rx_0x0a: port@8a000 {
cell-index = <0xa>;
- compatible = "fsl,fman-v2-port-rx";
+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx";
reg = <0x8a000 0x1000>;
};
fman0_tx_0x2a: port@aa000 {
cell-index = <0x2a>;
- compatible = "fsl,fman-v2-port-tx";
+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx";
reg = <0xaa000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi
@@ -35,13 +35,13 @@
fman@400000 {
fman0_rx_0x0b: port@8b000 {
cell-index = <0xb>;
- compatible = "fsl,fman-v2-port-rx";
+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx";
reg = <0x8b000 0x1000>;
};
fman0_tx_0x2b: port@ab000 {
cell-index = <0x2b>;
- compatible = "fsl,fman-v2-port-tx";
+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx";
reg = <0xab000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi
@@ -35,13 +35,13 @@
fman@400000 {
fman0_rx_0x0c: port@8c000 {
cell-index = <0xc>;
- compatible = "fsl,fman-v2-port-rx";
+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx";
reg = <0x8c000 0x1000>;
};
fman0_tx_0x2c: port@ac000 {
cell-index = <0x2c>;
- compatible = "fsl,fman-v2-port-tx";
+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx";
reg = <0xac000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi
@@ -35,13 +35,13 @@
fman@500000 {
fman1_rx_0x10: port@90000 {
cell-index = <0x10>;
- compatible = "fsl,fman-v2-port-rx";
+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-10g-rx";
reg = <0x90000 0x1000>;
};
fman1_tx_0x30: port@b0000 {
cell-index = <0x30>;
- compatible = "fsl,fman-v2-port-tx";
+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-10g-tx";
reg = <0xb0000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi
@@ -35,13 +35,13 @@
fman@500000 {
fman1_rx_0x08: port@88000 {
cell-index = <0x8>;
- compatible = "fsl,fman-v2-port-rx";
+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx";
reg = <0x88000 0x1000>;
};
fman1_tx_0x28: port@a8000 {
cell-index = <0x28>;
- compatible = "fsl,fman-v2-port-tx";
+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx";
reg = <0xa8000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi
@@ -35,13 +35,13 @@
fman@500000 {
fman1_rx_0x09: port@89000 {
cell-index = <0x9>;
- compatible = "fsl,fman-v2-port-rx";
+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx";
reg = <0x89000 0x1000>;
};
fman1_tx_0x29: port@a9000 {
cell-index = <0x29>;
- compatible = "fsl,fman-v2-port-tx";
+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx";
reg = <0xa9000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi
@@ -35,13 +35,13 @@
fman@500000 {
fman1_rx_0x0a: port@8a000 {
cell-index = <0xa>;
- compatible = "fsl,fman-v2-port-rx";
+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx";
reg = <0x8a000 0x1000>;
};
fman1_tx_0x2a: port@aa000 {
cell-index = <0x2a>;
- compatible = "fsl,fman-v2-port-tx";
+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx";
reg = <0xaa000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi
@@ -35,13 +35,13 @@
fman@500000 {
fman1_rx_0x0b: port@8b000 {
cell-index = <0xb>;
- compatible = "fsl,fman-v2-port-rx";
+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx";
reg = <0x8b000 0x1000>;
};
fman1_tx_0x2b: port@ab000 {
cell-index = <0x2b>;
- compatible = "fsl,fman-v2-port-tx";
+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx";
reg = <0xab000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi
@@ -35,13 +35,13 @@
fman@500000 {
fman1_rx_0x0c: port@8c000 {
cell-index = <0xc>;
- compatible = "fsl,fman-v2-port-rx";
+ compatible = "fsl,fman-v2-port-rx","fsl,fman-port-1g-rx";
reg = <0x8c000 0x1000>;
};
fman1_tx_0x2c: port@ac000 {
cell-index = <0x2c>;
- compatible = "fsl,fman-v2-port-tx";
+ compatible = "fsl,fman-v2-port-tx","fsl,fman-port-1g-tx";
reg = <0xac000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
@@ -35,7 +35,7 @@
fman@400000 {
fman0_rx_0x08: port@88000 {
cell-index = <0x8>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-10g-rx";
reg = <0x88000 0x1000>;
fsl,fman-10g-port;
fsl,fman-best-effort-port;
@@ -43,7 +43,7 @@ fman@400000 {
fman0_tx_0x28: port@a8000 {
cell-index = <0x28>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-10g-tx";
reg = <0xa8000 0x1000>;
fsl,fman-10g-port;
fsl,fman-best-effort-port;
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
@@ -35,14 +35,14 @@
fman@400000 {
fman0_rx_0x10: port@90000 {
cell-index = <0x10>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx";
reg = <0x90000 0x1000>;
fsl,fman-10g-port;
};
fman0_tx_0x30: port@b0000 {
cell-index = <0x30>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-10g-tx";
reg = <0xb0000 0x1000>;
fsl,fman-10g-port;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
@@ -35,7 +35,7 @@
fman@400000 {
fman0_rx_0x09: port@89000 {
cell-index = <0x9>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-10g-rx";
reg = <0x89000 0x1000>;
fsl,fman-10g-port;
fsl,fman-best-effort-port;
@@ -43,7 +43,7 @@ fman@400000 {
fman0_tx_0x29: port@a9000 {
cell-index = <0x29>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-10g-tx";
reg = <0xa9000 0x1000>;
fsl,fman-10g-port;
fsl,fman-best-effort-port;
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
@@ -35,14 +35,14 @@
fman@400000 {
fman0_rx_0x11: port@91000 {
cell-index = <0x11>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx";
reg = <0x91000 0x1000>;
fsl,fman-10g-port;
};
fman0_tx_0x31: port@b1000 {
cell-index = <0x31>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-10g-tx";
reg = <0xb1000 0x1000>;
fsl,fman-10g-port;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
@@ -35,13 +35,13 @@
fman@400000 {
fman0_rx_0x08: port@88000 {
cell-index = <0x8>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx";
reg = <0x88000 0x1000>;
};
fman0_tx_0x28: port@a8000 {
cell-index = <0x28>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx";
reg = <0xa8000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
@@ -35,13 +35,13 @@
fman@400000 {
fman0_rx_0x09: port@89000 {
cell-index = <0x9>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx";
reg = <0x89000 0x1000>;
};
fman0_tx_0x29: port@a9000 {
cell-index = <0x29>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx";
reg = <0xa9000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
@@ -35,13 +35,13 @@
fman@400000 {
fman0_rx_0x0a: port@8a000 {
cell-index = <0xa>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx";
reg = <0x8a000 0x1000>;
};
fman0_tx_0x2a: port@aa000 {
cell-index = <0x2a>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx";
reg = <0xaa000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
@@ -35,13 +35,13 @@
fman@400000 {
fman0_rx_0x0b: port@8b000 {
cell-index = <0xb>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx";
reg = <0x8b000 0x1000>;
};
fman0_tx_0x2b: port@ab000 {
cell-index = <0x2b>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx";
reg = <0xab000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
@@ -35,13 +35,13 @@
fman@400000 {
fman0_rx_0x0c: port@8c000 {
cell-index = <0xc>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx";
reg = <0x8c000 0x1000>;
};
fman0_tx_0x2c: port@ac000 {
cell-index = <0x2c>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx";
reg = <0xac000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
@@ -35,13 +35,13 @@
fman@400000 {
fman0_rx_0x0d: port@8d000 {
cell-index = <0xd>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx";
reg = <0x8d000 0x1000>;
};
fman0_tx_0x2d: port@ad000 {
cell-index = <0x2d>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx";
reg = <0xad000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
@@ -35,14 +35,14 @@
fman@500000 {
fman1_rx_0x10: port@90000 {
cell-index = <0x10>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-10g-rx";
reg = <0x90000 0x1000>;
fsl,fman-10g-port;
};
fman1_tx_0x30: port@b0000 {
cell-index = <0x30>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-10g-tx";
reg = <0xb0000 0x1000>;
fsl,fman-10g-port;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
@@ -35,14 +35,14 @@
fman@500000 {
fman1_rx_0x11: port@91000 {
cell-index = <0x11>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-10g-rx";
reg = <0x91000 0x1000>;
fsl,fman-10g-port;
};
fman1_tx_0x31: port@b1000 {
cell-index = <0x31>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-10g-tx";
reg = <0xb1000 0x1000>;
fsl,fman-10g-port;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
@@ -35,13 +35,13 @@
fman@500000 {
fman1_rx_0x08: port@88000 {
cell-index = <0x8>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx";
reg = <0x88000 0x1000>;
};
fman1_tx_0x28: port@a8000 {
cell-index = <0x28>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx";
reg = <0xa8000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
@@ -35,13 +35,13 @@
fman@500000 {
fman1_rx_0x09: port@89000 {
cell-index = <0x9>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx";
reg = <0x89000 0x1000>;
};
fman1_tx_0x29: port@a9000 {
cell-index = <0x29>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx";
reg = <0xa9000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
@@ -35,13 +35,13 @@
fman@500000 {
fman1_rx_0x0a: port@8a000 {
cell-index = <0xa>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx";
reg = <0x8a000 0x1000>;
};
fman1_tx_0x2a: port@aa000 {
cell-index = <0x2a>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx";
reg = <0xaa000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
@@ -35,13 +35,13 @@
fman@500000 {
fman1_rx_0x0b: port@8b000 {
cell-index = <0xb>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx";
reg = <0x8b000 0x1000>;
};
fman1_tx_0x2b: port@ab000 {
cell-index = <0x2b>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx";
reg = <0xab000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
@@ -35,13 +35,13 @@
fman@500000 {
fman1_rx_0x0c: port@8c000 {
cell-index = <0xc>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx";
reg = <0x8c000 0x1000>;
};
fman1_tx_0x2c: port@ac000 {
cell-index = <0x2c>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx";
reg = <0xac000 0x1000>;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
@@ -35,13 +35,13 @@
fman@500000 {
fman1_rx_0x0d: port@8d000 {
cell-index = <0xd>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx","fsl,fman-port-1g-rx";
reg = <0x8d000 0x1000>;
};
fman1_tx_0x2d: port@ad000 {
cell-index = <0x2d>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx","fsl,fman-port-1g-tx";
reg = <0xad000 0x1000>;
};
Reference in New Issue View Git Blame Copy Permalink