openwrt/package/firmware
David Bauer 95b0c07a61 ipq40xx: add support for FritzBox 7530
Hardware
--------
CPU:   Qualcomm IPQ4019
RAM:   256M
FLASH: 128M NAND
ETH:   QCA8075
VDSL:  Intel/Lantiq VRX518 PCIe attached
       currently not supported
DECT:  Dialog SC14448
       currently not supported
WiFi2: IPQ4019 2T2R 2SS b/g/n
WiFi5: IPQ4019 2T2R 2SS n/ac
LED:    - Power/DSL green
        - WLAN green
        - FON/DECT green
        - Connect/WPS green
        - Info green
        - Info red
BTN:    - WLAN
        - FON
        - WPS/Connect
UART:  115200n8 3.3V (located under the Dialog chip)
       VCC - RX - TX - GND (Square is VCC)

Installation
------------
1. Grab the uboot for the Device from the 'u-boot-fritz7530'
   subdirectory. Place it in the same directory as the 'eva_ramboot.py'
   script. It is located in the 'scripts/flashing' subdirectory of the
   OpenWRT tree.

2. Assign yourself the IP address 192.168.178.10/24. Connect your
   Computer to one of the boxes LAN ports.

3. Connect Power to the Box. As soon as the LAN port of your computer
   shows link, load the U-Boot to the box using following command.

   > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz7530.bin

4. The U-Boot will now start. Now assign yourself the IP address
   192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP
   server root directory and rename it to 'FRITZ7530.bin'.

5. The Box will now boot OpenWRT from RAM. This can take up to two
   minutes.

6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using
   scp. SSH into the Box and first write the Bootloader to both previous
   kernel partitions.

   > mtd write /path/to/uboot-fritz7530.bin uboot0
   > mtd write /path/to/uboot-fritz7530.bin uboot1

7. Remove the AVM filesystem partitions to make room for our kernel +
   rootfs + overlayfs.

   > ubirmvol /dev/ubi0 --name=avm_filesys_0
   > ubirmvol /dev/ubi0 --name=avm_filesys_1

8. Flash OpenWRT peristently using sysupgrade.

   > sysupgrade -n /path/to/openwrt-sysupgrade.bin

Signed-off-by: David Bauer <mail@david-bauer.net>
[removed pcie-dts range node, refreshed on top of AP120-AC/E2600AC]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-02-28 11:32:55 +01:00
..
am33x-cm3 treewide: clean up and unify PKG_VERSION for git based downloads 2016-12-22 16:42:21 +01:00
amd64-microcode Revert "amd64-microcode: create early load microcode image" 2018-11-27 18:58:33 +01:00
ath10k-firmware ath10k-firmware: update Candela Tech firmware images 2019-02-11 19:02:41 +01:00
b43legacy-firmware treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
brcmfmac-board-rpi brcm2708: move wifi calibration EEPROMs out of base-files 2018-06-14 18:15:33 +02:00
intel-microcode Revert "intel-microcode: create early load microcode image" 2018-11-27 18:58:37 +01:00
ipq-wifi ipq40xx: add support for FritzBox 7530 2019-02-28 11:32:55 +01:00
ixp4xx-microcode treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
lantiq/dsl-vrx200-firmware-xdsl treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
layerscape layerscape: build ls-dpl package with linux dtc tool 2018-09-22 21:20:58 +02:00
linux-firmware linux-firmware: DRM: add amdgpu firmware 2019-02-17 19:22:39 +01:00
prism54-firmware treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
vsc73x5-ucode treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
wireless-regdb wireless-regdb: fix PKG_MIRROR_HASH 2017-11-22 13:07:48 +01:00