openwrt/target/linux/bcm63xx/dts/bcm63168-sky-sr102.dts

126 lines
2.2 KiB
Plaintext

/dts-v1/;
#include "bcm63268.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "SKY SR102";
compatible = "sky,sr102", "brcm,bcm63168", "brcm,bcm63268";
aliases {
led-boot = &led_power_white;
led-failsafe = &led_power_white;
led-running = &led_power_white;
led-upgrade = &led_power_white;
};
chosen {
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
wps {
label = "wps";
gpios = <&pinctrl 33 0>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
lan1_green {
label = "SR102:green:lan1";
gpios = <&pinctrl 1 1>;
};
power_red {
label = "SR102:red:power";
gpios = <&pinctrl 2 1>;
};
wifi_red {
label = "SR102:red:wifi";
gpios = <&pinctrl 3 1>;
};
inet_red {
label = "SR102:red:inet";
gpios = <&pinctrl 4 1>;
};
inet_white {
label = "SR102:white:inet";
gpios = <&pinctrl 5 0>;
};
led_power_white: power_white {
label = "SR102:white:power";
gpios = <&pinctrl 6 0>;
default-state = "on";
};
wifi_white {
label = "SR102:white:wifi";
gpios = <&pinctrl 8 0>;
};
lan2_red {
label = "SR102:red:lan2";
gpios = <&pinctrl 9 1>;
};
lan3_red {
label = "SR102:red:lan3";
gpios = <&pinctrl 10 1>;
};
lan4_red {
label = "SR102:red:lan4";
gpios = <&pinctrl 11 1>;
};
lan1_red {
label = "SR102:red:lan1";
gpios = <&pinctrl 12 1>;
};
lan2_green {
label = "SR102:green:lan2";
gpios = <&pinctrl 13 0>;
};
lan3_green {
label = "SR102:green:lan3";
gpios = <&pinctrl 14 1>;
};
lan4_green {
label = "SR102:green:lan4";
gpios = <&pinctrl 15 1>;
};
hd_white {
label = "SR102:white:hd";
gpios = <&pinctrl 18 0>;
};
};
};
&hsspi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <16666667>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "brcm,bcm963xx-cfe-nor-partitions";
};
};
};
&uart0 {
status = "okay";
};