openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Florian Fainelli 5905a48169 allow bcm6338 to get the base address of the memory controller register, required to detect memory size SVN-Revision: 14047		2009-01-15 22:42:22 +00:00
docs	document the BUILDONLY option	2009-01-13 02:03:22 +00:00
include	update to 2.6.27.11	2009-01-15 13:40:35 +00:00
package	change LEDs on wrt54g3g only /proc/diag is not available on x86, so check for existance to avoid errors... Thanks Markus Wigge	2009-01-15 18:02:08 +00:00
scripts	Fix parsing of password option; set timeout for writing.	2009-01-15 22:05:10 +00:00
target	allow bcm6338 to get the base address of the memory controller register, required to detect memory size	2009-01-15 22:42:22 +00:00
toolchain	fix powerpc toolchain build failure on x86_64 hosts	2009-01-14 18:33:13 +00:00
tools	firmware-utils/mkcasfw: fix magic value of the TN-U200 board	2009-01-13 10:18:13 +00:00
.gitignore	add feeds.conf to .gitignore	2008-09-23 11:06:06 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	add support for an optional staging directory for debug binaries	2009-01-13 03:21:25 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	remove toolchain build directory as well in 'make dirclean'	2008-12-03 04:22:41 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
feeds.conf.default	Switched LuCI-SVN to another server	2008-10-16 14:57:50 +00:00
rules.mk	add support for an optional staging directory for debug binaries	2009-01-13 03:21:25 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org