openwrt/target/linux/malta
John Crispin 9c4cdf76c6 malta: add harddisk support
works with:
qemu-system-mipsel -M malta \
-hda openwrt-malta-le-root.ext4 \
-kernel openwrt-malta-le-vmlinux.elf \
-nographic -append "root=/dev/sda console=ttyS0"

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46269
2015-07-08 14:25:36 +00:00
..
base-files/etc malta: add default network configuration 2015-05-31 17:45:43 +00:00
be build: unify mips target cflags 2013-09-26 17:53:14 +00:00
be64 build: unify mips target cflags 2013-09-26 17:53:14 +00:00
image malta: fix imagebuilder 2015-05-28 12:05:57 +00:00
le build: unify mips target cflags 2013-09-26 17:53:14 +00:00
le64 build: unify mips target cflags 2013-09-26 17:53:14 +00:00
patches kernel: update 3.18 to 3.18.14 2015-05-21 19:32:46 +00:00
Makefile malta: disable 64 builds as the userland has been broken for ages 2015-02-09 12:11:28 +00:00
README malta: update README 2013-07-19 17:12:47 +00:00
config-3.18 malta: add harddisk support 2015-07-08 14:25:36 +00:00

README

This Malta target is intended to be used with the Qemu emulator. It can be used
to prototype an OpenWrt firmware for MIPS processors. One could also use it to
troubleshoot MIPS applications without access to real hardware.

To use the images built by OpenWrt with qemu, use the following commands:

For the little-endian image:
qemu-system-mipsel -kernel bin/malta/openwrt-malta-le-vmlinux-initramfs.elf -nographic -m 256

For the big-endian image:
qemu-system-mips -kernel bin/malta/openwrt-malta-be-vmlinux-initramfs.elf -nographic -m 256

and enjoy the system bootin.