openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Felix Fietkau 5832e754fb mtd: fix trx_fixup With the BRCM47xx image I have built (Linksys E3000), there are additional writes following the completion of "mtd_replace_jffs2" which invalidate the 'trx_fixup' performed by 'mtd_replace_jffs2'. Moving the 'trx_fixup' to somewhere after all writes have completed fixes the problem. I also noticed that 'erasesize' used to compute 'block_offset' in 'mtd_fixtrx' is used before it is computed by 'mtd_check_open'; moving the call to 'mtd_check_open' up a few lines fixes this. Unlike 'mtd_fixtrx', 'trx_fixup' appears to assume that the TRX header is always at offset 0; which may be the cause of the problem described in Ticket #8960. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 32866		2012-07-25 17:28:32 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	use autoreconf hook instead of manual call	2012-07-25 10:34:06 +00:00
package	mtd: fix trx_fixup	2012-07-25 17:28:32 +00:00
scripts	build: ensure that reordering of KCONFIG lines are handled properly and that the final result does not depend on the package scan order	2012-07-22 21:00:07 +00:00
target	move isp116x driver to target specific modules.mk	2012-07-25 15:50:45 +00:00
toolchain	kernel: fix portability issues on the x86 specific relocs host tool, fixes build on mac os x	2012-07-20 12:28:50 +00:00
tools	add mktools and dosfstools which are needed for the raspberry pi	2012-07-24 20:39:00 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	config: tag parallel build options with high build breakage probability with a BROKEN dependency to discourage users from spamming us with tickets about them	2012-06-30 21:44:12 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	abort built in prereq target if there is no site config file for the current target	2012-01-19 12:19:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
rules.mk	add and export HOSTCC_NOCACHE	2012-06-20 07:48:47 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org