This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org
 
 
 
 
 
 
Go to file
Steven Barth 579fe7f52a iproute2: improve ip-full coexistence, remove rt_table
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46831
2015-09-08 17:44:17 +00:00
config gcc: remove version 4.9-linaro 2015-09-06 10:07:03 +00:00
docs build: Prevent more gzip timestamps 2015-07-14 09:57:45 +00:00
include nls.mk: add -rpath-link when needed for NLS support 2015-09-07 08:03:34 +00:00
package iproute2: improve ip-full coexistence, remove rt_table 2015-09-08 17:44:17 +00:00
scripts build: add a build step for generic sysupgrade nand image 2015-09-04 14:44:27 +00:00
target kernel: describe bridge patch "multicast to unicast" 2015-09-08 16:43:32 +00:00
toolchain musl: add a hack to remove unused crypt() algorithms, saves ~14k after lzma 2015-09-08 10:57:11 +00:00
tools tools/firmware-utils: add header version 2 support for mktplinkfw 2015-08-17 06:23:43 +00:00
.gitattributes
.gitignore build: add integration for managing opkg package feed keys 2015-04-06 19:39:51 +00:00
BSDmakefile
Config.in scripts/config: sync with linux upstream 2015-01-08 14:33:53 +00:00
LICENSE
Makefile Makefile: move the cleaning of staging_dir/target* from dirclean to clean 2015-06-14 17:47:16 +00:00
README Add 'subversion' build dependency to README 2014-08-31 12:06:32 +00:00
feeds.conf.default feeds.conf.default: add new targets feed 2015-03-19 11:58:35 +00:00
rules.mk rules.mk: remove GCC 4.4 and GCC 4.5 conditional 2015-08-25 07:45:42 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org