openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

John Crispin 565a6f2a27 ipq806x: fix "reboot" command The watchdog driver already registers a restart notifier, we just have to enable it in the config and in the DT to fix the "reboot" command. This is done by integratin the following patch-set: https://lkml.org/lkml/2015/2/20/610 I'm copy-pasting the description below: qcom-wdt is currently assuming the presence of a dedicated node in DT to gets its configuration. However, on msm architecture, the watchdog is usually part of the timer block. So this patch-set is changing the driver and slightly enhancing the timer DT bindings to provide the relevant clocks and interrupts. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 44504		2015-02-22 08:29:14 +00:00
config	config: disable kernel tracing on uml	2015-02-11 11:31:26 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	include: netfilter: fix packaging of LOG target for Linux >= 3.16 (#19031 )	2015-02-18 13:28:28 +00:00
package	kernel: Fix USB gadget modules for v3.18	2015-02-22 08:29:01 +00:00
scripts	scripts: fix getver git dir check	2015-02-14 20:48:37 +00:00
target	ipq806x: fix "reboot" command	2015-02-22 08:29:14 +00:00
toolchain	toolchain/gcc: fix an ICE on ARM (PR58595)	2015-02-11 11:30:56 +00:00
tools	tools/patchelf: fix portability issue breaking mac os x builds (#18998 )	2015-02-19 10:30:39 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	add git-src to .gitignore	2014-01-12 12:06:39 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	scripts/config: sync with linux upstream	2015-01-08 14:33:53 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	Revert "build: use ONESHELL to speed up scanning and the toplevel makefile"	2014-10-22 10:47:26 +00:00
README	Add 'subversion' build dependency to README	2014-08-31 12:06:32 +00:00
feeds.conf.default	Move telephony feed to github	2014-12-11 10:30:51 +00:00
rules.mk	rules.mk: don't add staging_dir/host/bin/ path again	2015-02-10 15:49:36 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org