openwrt/target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbpci.h

115 lines
4.2 KiB
C

/*
* HND SiliconBackplane PCI core hardware definitions.
*
* Copyright 2006, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
*
* $Id: sbpci.h,v 1.1.1.11 2006/02/27 03:43:16 honor Exp $
*/
#ifndef _sbpci_h_
#define _sbpci_h_
#ifndef _LANGUAGE_ASSEMBLY
/* cpp contortions to concatenate w/arg prescan */
#ifndef PAD
#define _PADLINE(line) pad ## line
#define _XSTR(line) _PADLINE(line)
#define PAD _XSTR(__LINE__)
#endif
/* Sonics side: PCI core and host control registers */
typedef struct sbpciregs {
uint32 control; /* PCI control */
uint32 PAD[3];
uint32 arbcontrol; /* PCI arbiter control */
uint32 PAD[3];
uint32 intstatus; /* Interrupt status */
uint32 intmask; /* Interrupt mask */
uint32 sbtopcimailbox; /* Sonics to PCI mailbox */
uint32 PAD[9];
uint32 bcastaddr; /* Sonics broadcast address */
uint32 bcastdata; /* Sonics broadcast data */
uint32 PAD[2];
uint32 gpioin; /* ro: gpio input (>=rev2) */
uint32 gpioout; /* rw: gpio output (>=rev2) */
uint32 gpioouten; /* rw: gpio output enable (>= rev2) */
uint32 gpiocontrol; /* rw: gpio control (>= rev2) */
uint32 PAD[36];
uint32 sbtopci0; /* Sonics to PCI translation 0 */
uint32 sbtopci1; /* Sonics to PCI translation 1 */
uint32 sbtopci2; /* Sonics to PCI translation 2 */
uint32 PAD[189];
uint32 pcicfg[4][64]; /* 0x400 - 0x7FF, PCI Cfg Space (>=rev8) */
uint16 sprom[36]; /* SPROM shadow Area */
uint32 PAD[46];
} sbpciregs_t;
#endif /* _LANGUAGE_ASSEMBLY */
/* PCI control */
#define PCI_RST_OE 0x01 /* When set, drives PCI_RESET out to pin */
#define PCI_RST 0x02 /* Value driven out to pin */
#define PCI_CLK_OE 0x04 /* When set, drives clock as gated by PCI_CLK out to pin */
#define PCI_CLK 0x08 /* Gate for clock driven out to pin */
/* PCI arbiter control */
#define PCI_INT_ARB 0x01 /* When set, use an internal arbiter */
#define PCI_EXT_ARB 0x02 /* When set, use an external arbiter */
/* ParkID - for PCI corerev >= 8 */
#define PCI_PARKID_MASK 0x1c /* Selects which agent is parked on an idle bus */
#define PCI_PARKID_SHIFT 2
#define PCI_PARKID_EXT0 0 /* External master 0 */
#define PCI_PARKID_EXT1 1 /* External master 1 */
#define PCI_PARKID_EXT2 2 /* External master 2 */
#define PCI_PARKID_INT 3 /* Internal master */
#define PCI_PARKID_LAST 4 /* Last active master */
/* Interrupt status/mask */
#define PCI_INTA 0x01 /* PCI INTA# is asserted */
#define PCI_INTB 0x02 /* PCI INTB# is asserted */
#define PCI_SERR 0x04 /* PCI SERR# has been asserted (write one to clear) */
#define PCI_PERR 0x08 /* PCI PERR# has been asserted (write one to clear) */
#define PCI_PME 0x10 /* PCI PME# is asserted */
/* (General) PCI/SB mailbox interrupts, two bits per pci function */
#define MAILBOX_F0_0 0x100 /* function 0, int 0 */
#define MAILBOX_F0_1 0x200 /* function 0, int 1 */
#define MAILBOX_F1_0 0x400 /* function 1, int 0 */
#define MAILBOX_F1_1 0x800 /* function 1, int 1 */
#define MAILBOX_F2_0 0x1000 /* function 2, int 0 */
#define MAILBOX_F2_1 0x2000 /* function 2, int 1 */
#define MAILBOX_F3_0 0x4000 /* function 3, int 0 */
#define MAILBOX_F3_1 0x8000 /* function 3, int 1 */
/* Sonics broadcast address */
#define BCAST_ADDR_MASK 0xff /* Broadcast register address */
/* Sonics to PCI translation types */
#define SBTOPCI0_MASK 0xfc000000
#define SBTOPCI1_MASK 0xfc000000
#define SBTOPCI2_MASK 0xc0000000
#define SBTOPCI_MEM 0
#define SBTOPCI_IO 1
#define SBTOPCI_CFG0 2
#define SBTOPCI_CFG1 3
#define SBTOPCI_PREF 0x4 /* prefetch enable */
#define SBTOPCI_BURST 0x8 /* burst enable */
#define SBTOPCI_RC_MASK 0x30 /* read command (>= rev11) */
#define SBTOPCI_RC_READ 0x00 /* memory read */
#define SBTOPCI_RC_READLINE 0x10 /* memory read line */
#define SBTOPCI_RC_READMULTI 0x20 /* memory read multiple */
/* PCI core index in SROM shadow area */
#define SRSH_PI_OFFSET 0 /* first word */
#define SRSH_PI_MASK 0xf000 /* bit 15:12 */
#define SRSH_PI_SHIFT 12 /* bit 15:12 */
#endif /* _sbpci_h_ */