openwrt/target/linux/gemini/patches-3.8/140-arm-gemini-add-pci-supp...

390 lines
11 KiB
Diff

--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -388,6 +388,7 @@ config ARCH_GEMINI
select ARCH_USES_GETTIMEOFFSET
select NEED_MACH_GPIO_H
select CPU_FA526
+ select MIGHT_HAVE_PCI
help
Support for the Cortina Systems Gemini family SoCs
--- a/arch/arm/mach-gemini/include/mach/hardware.h
+++ b/arch/arm/mach-gemini/include/mach/hardware.h
@@ -71,4 +71,9 @@
*/
#define IO_ADDRESS(x) IOMEM((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000)
+/*
+ * PCI subsystem macros
+ */
+#define pcibios_assign_all_busses() 1
+
#endif
--- a/arch/arm/mach-gemini/include/mach/irqs.h
+++ b/arch/arm/mach-gemini/include/mach/irqs.h
@@ -43,11 +43,14 @@
#define NORMAL_IRQ_NUM 32
-#define GPIO_IRQ_BASE NORMAL_IRQ_NUM
+#define PCI_IRQ_BASE NORMAL_IRQ_NUM
+#define PCI_IRQ_NUM 4
+
+#define GPIO_IRQ_BASE (NORMAL_IRQ_NUM + PCI_IRQ_NUM)
#define GPIO_IRQ_NUM (3 * 32)
#define ARCH_TIMER_IRQ IRQ_TIMER2
-#define NR_IRQS (NORMAL_IRQ_NUM + GPIO_IRQ_NUM)
+#define NR_IRQS (NORMAL_IRQ_NUM + PCI_IRQ_NUM + GPIO_IRQ_NUM)
#endif /* __MACH_IRQS_H__ */
--- a/arch/arm/mach-gemini/Makefile
+++ b/arch/arm/mach-gemini/Makefile
@@ -6,6 +6,8 @@
obj-y := irq.o mm.o time.o devices.o gpio.o idle.o reset.o
+obj-$(CONFIG_PCI) += pci.o
+
# Board-specific support
obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o
obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o
--- a/arch/arm/mach-gemini/mm.c
+++ b/arch/arm/mach-gemini/mm.c
@@ -59,6 +59,11 @@ static struct map_desc gemini_io_desc[]
.length = SZ_512K,
.type = MT_DEVICE,
}, {
+ .virtual = (unsigned long)IO_ADDRESS(GEMINI_PCI_IO_BASE),
+ .pfn = __phys_to_pfn(GEMINI_PCI_IO_BASE),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
.virtual = (unsigned long)IO_ADDRESS(GEMINI_FLASH_CTRL_BASE),
.pfn = __phys_to_pfn(GEMINI_FLASH_CTRL_BASE),
.length = SZ_512K,
--- /dev/null
+++ b/arch/arm/mach-gemini/pci.c
@@ -0,0 +1,320 @@
+/*
+ * Support for Gemini PCI Controller
+ *
+ * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
+ * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * based on SL2312 PCI controller code
+ * Storlink (C) 2003
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/pci.h>
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+
+#define GEMINI_PCI_IOSIZE_1M 0x0000
+
+#define GEMINI_PCI_PMC 0x40
+#define GEMINI_PCI_PMCSR 0x44
+#define GEMINI_PCI_CTRL1 0x48
+#define GEMINI_PCI_CTRL2 0x4C
+#define GEMINI_PCI_MEM1_BASE_SIZE 0x50
+#define GEMINI_PCI_MEM2_BASE_SIZE 0x54
+#define GEMINI_PCI_MEM3_BASE_SIZE 0x58
+
+#define PCI_CTRL2_INTSTS_OFFSET 28
+#define PCI_CTRL2_INTMASK_OFFSET 22
+
+#define GEMINI_PCI_DMA_MASK 0xFFF00000
+#define GEMINI_PCI_DMA_MEM1_BASE 0x00000000
+#define GEMINI_PCI_DMA_MEM2_BASE 0x00000000
+#define GEMINI_PCI_DMA_MEM3_BASE 0x00000000
+#define GEMINI_PCI_DMA_MEM1_SIZE 7
+#define GEMINI_PCI_DMA_MEM2_SIZE 6
+#define GEMINI_PCI_DMA_MEM3_SIZE 6
+
+#define PCI_CONF_ENABLE (1 << 31)
+#define PCI_CONF_WHERE(r) ((r) & 0xFC)
+#define PCI_CONF_BUS(b) (((b) & 0xFF) << 16)
+#define PCI_CONF_DEVICE(d) (((d) & 0x1F) << 11)
+#define PCI_CONF_FUNCTION(f) (((f) & 0x07) << 8)
+
+#define PCI_IOSIZE_REG (IO_ADDRESS(GEMINI_PCI_IO_BASE))
+#define PCI_PROT_REG (IO_ADDRESS(GEMINI_PCI_IO_BASE) + 0x04)
+#define PCI_CTRL_REG (IO_ADDRESS(GEMINI_PCI_IO_BASE) + 0x08)
+#define PCI_SOFTRST_REG (IO_ADDRESS(GEMINI_PCI_IO_BASE) + 0x10)
+#define PCI_CONFIG_REG (IO_ADDRESS(GEMINI_PCI_IO_BASE) + 0x28)
+#define PCI_DATA_REG (IO_ADDRESS(GEMINI_PCI_IO_BASE) + 0x2C)
+
+
+static DEFINE_SPINLOCK(gemini_pci_lock);
+
+static int gemini_pci_read_config(struct pci_bus* bus, unsigned int fn,
+ int config, int size, u32* value)
+{
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&gemini_pci_lock, irq_flags);
+
+ __raw_writel(PCI_CONF_BUS(bus->number) |
+ PCI_CONF_DEVICE(PCI_SLOT(fn)) |
+ PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
+ PCI_CONF_WHERE(config) |
+ PCI_CONF_ENABLE,
+ PCI_CONFIG_REG);
+
+ *value = __raw_readl(PCI_DATA_REG);
+
+ if (size == 1)
+ *value = (*value >> (8 * (config & 3))) & 0xFF;
+ else if (size == 2)
+ *value = (*value >> (8 * (config & 3))) & 0xFFFF;
+
+ spin_unlock_irqrestore(&gemini_pci_lock, irq_flags);
+
+ dev_dbg(&bus->dev,
+ "[read] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
+ PCI_SLOT(fn), PCI_FUNC(fn), config, size, *value);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int gemini_pci_write_config(struct pci_bus* bus, unsigned int fn,
+ int config, int size, u32 value)
+{
+ unsigned long irq_flags = 0;
+ int ret = PCIBIOS_SUCCESSFUL;
+
+ dev_dbg(&bus->dev,
+ "[write] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
+ PCI_SLOT(fn), PCI_FUNC(fn), config, size, value);
+
+ spin_lock_irqsave(&gemini_pci_lock, irq_flags);
+
+ __raw_writel(PCI_CONF_BUS(bus->number) |
+ PCI_CONF_DEVICE(PCI_SLOT(fn)) |
+ PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
+ PCI_CONF_WHERE(config) |
+ PCI_CONF_ENABLE,
+ PCI_CONFIG_REG);
+
+ switch(size) {
+ case 4:
+ __raw_writel(value, PCI_DATA_REG);
+ break;
+ case 2:
+ __raw_writew(value, PCI_DATA_REG + (config & 3));
+ break;
+ case 1:
+ __raw_writeb(value, PCI_DATA_REG + (config & 3));
+ break;
+ default:
+ ret = PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ spin_unlock_irqrestore(&gemini_pci_lock, irq_flags);
+
+ return ret;
+}
+
+static struct pci_ops gemini_pci_ops = {
+ .read = gemini_pci_read_config,
+ .write = gemini_pci_write_config,
+};
+
+static struct resource gemini_pci_resource_io = {
+ .name = "PCI I/O Space",
+ .start = GEMINI_PCI_IO_BASE,
+ .end = GEMINI_PCI_IO_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_IO,
+};
+
+static struct resource gemini_pci_resource_mem = {
+ .name = "PCI Memory Space",
+ .start = GEMINI_PCI_MEM_BASE,
+ .end = GEMINI_PCI_MEM_BASE + SZ_128M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static int __init gemini_pci_request_resources(struct pci_sys_data *sys)
+{
+ if (request_resource(&ioport_resource, &gemini_pci_resource_io))
+ goto bad_resources;
+ if (request_resource(&iomem_resource, &gemini_pci_resource_mem))
+ goto bad_resources;
+
+ pci_add_resource(&sys->resources, &gemini_pci_resource_io);
+ pci_add_resource(&sys->resources, &gemini_pci_resource_mem);
+
+ return 0;
+
+bad_resources:
+ pr_err("Gemini PCI: request_resource() failed. "
+ "Abort PCI bus enumeration.\n");
+ return -1;
+}
+
+static int __init gemini_pci_setup(int nr, struct pci_sys_data *sys)
+{
+ unsigned int cmd;
+
+ pcibios_min_io = 0x100;
+ pcibios_min_mem = 0;
+
+ if ((nr > 0) || gemini_pci_request_resources(sys))
+ return 0;
+
+ /* setup I/O space to 1MB size */
+ __raw_writel(GEMINI_PCI_IOSIZE_1M, PCI_IOSIZE_REG);
+
+ /* setup hostbridge */
+ cmd = __raw_readl(PCI_CTRL_REG);
+ cmd |= PCI_COMMAND_IO;
+ cmd |= PCI_COMMAND_MEMORY;
+ cmd |= PCI_COMMAND_MASTER;
+ __raw_writel(cmd, PCI_CTRL_REG);
+
+ return 1;
+}
+
+static struct pci_bus* __init gemini_pci_scan_bus(int nr, struct pci_sys_data* sys)
+{
+ unsigned int reg = 0;
+ struct pci_bus* bus = 0;
+
+ bus = pci_scan_bus(nr, &gemini_pci_ops, sys);
+ if (bus) {
+ dev_dbg(&bus->dev, "setting up PCI DMA\n");
+ reg = (GEMINI_PCI_DMA_MEM1_BASE & GEMINI_PCI_DMA_MASK)
+ | (GEMINI_PCI_DMA_MEM1_SIZE << 16);
+ gemini_pci_write_config(bus, 0, GEMINI_PCI_MEM1_BASE_SIZE, 4, reg);
+ reg = (GEMINI_PCI_DMA_MEM2_BASE & GEMINI_PCI_DMA_MASK)
+ | (GEMINI_PCI_DMA_MEM2_SIZE << 16);
+ gemini_pci_write_config(bus, 0, GEMINI_PCI_MEM2_BASE_SIZE, 4, reg);
+ reg = (GEMINI_PCI_DMA_MEM3_BASE & GEMINI_PCI_DMA_MASK)
+ | (GEMINI_PCI_DMA_MEM3_SIZE << 16);
+ gemini_pci_write_config(bus, 0, GEMINI_PCI_MEM3_BASE_SIZE, 4, reg);
+ }
+
+ return bus;
+}
+
+/* Should work with all boards based on original Storlink EVB */
+static int __init gemini_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if (slot < 9 || slot > 12)
+ return -1;
+
+ return PCI_IRQ_BASE + (((slot - 9) + (pin - 1)) & 0x3);
+}
+
+static struct hw_pci gemini_hw_pci __initdata = {
+ .nr_controllers = 1,
+ .setup = gemini_pci_setup,
+ .scan = gemini_pci_scan_bus,
+ .map_irq = gemini_pci_map_irq,
+};
+
+/* we need this for muxed PCI interrupts handling */
+static struct pci_bus bogus_pci_bus;
+
+static void gemini_pci_ack_irq(struct irq_data *d)
+{
+ unsigned int irq = d->irq;
+ unsigned int reg;
+
+ gemini_pci_read_config(&bogus_pci_bus, 0, GEMINI_PCI_CTRL2, 4, &reg);
+ reg &= ~(0xF << PCI_CTRL2_INTSTS_OFFSET);
+ reg |= 1 << (irq - PCI_IRQ_BASE + PCI_CTRL2_INTSTS_OFFSET);
+ gemini_pci_write_config(&bogus_pci_bus, 0, GEMINI_PCI_CTRL2, 4, reg);
+}
+
+static void gemini_pci_mask_irq(struct irq_data *d)
+{
+ unsigned int irq = d->irq;
+ unsigned int reg;
+
+ gemini_pci_read_config(&bogus_pci_bus, 0, GEMINI_PCI_CTRL2, 4, &reg);
+ reg &= ~((0xF << PCI_CTRL2_INTSTS_OFFSET)
+ | (1 << (irq - PCI_IRQ_BASE + PCI_CTRL2_INTMASK_OFFSET)));
+ gemini_pci_write_config(&bogus_pci_bus, 0, GEMINI_PCI_CTRL2, 4, reg);
+}
+
+static void gemini_pci_unmask_irq(struct irq_data *d)
+{
+ unsigned int irq = d->irq;
+ unsigned int reg;
+
+ gemini_pci_read_config(&bogus_pci_bus, 0, GEMINI_PCI_CTRL2, 4, &reg);
+ reg &= ~(0xF << PCI_CTRL2_INTSTS_OFFSET);
+ reg |= 1 << (irq - PCI_IRQ_BASE + PCI_CTRL2_INTMASK_OFFSET);
+ gemini_pci_write_config(&bogus_pci_bus, 0, GEMINI_PCI_CTRL2, 4, reg);
+}
+
+static void gemini_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned int pci_irq_no, irq_stat, reg, i;
+
+ gemini_pci_read_config(&bogus_pci_bus, 0, GEMINI_PCI_CTRL2, 4, &reg);
+ irq_stat = reg >> PCI_CTRL2_INTSTS_OFFSET;
+
+ for (i = 0; i < 4; i++) {
+
+ if ((irq_stat & (1 << i)) == 0)
+ continue;
+
+ pci_irq_no = PCI_IRQ_BASE + i;
+
+ BUG_ON(!(irq_desc[pci_irq_no].handle_irq));
+ irq_desc[pci_irq_no].handle_irq(pci_irq_no,
+ &irq_desc[pci_irq_no]);
+ }
+}
+
+static struct irq_chip gemini_pci_irq_chip = {
+ .name = "PCI",
+ .irq_ack = gemini_pci_ack_irq,
+ .irq_mask = gemini_pci_mask_irq,
+ .irq_unmask = gemini_pci_unmask_irq,
+};
+
+static int __init gemini_pci_init(void)
+{
+ int i;
+
+ for (i = 72; i <= 95; i++)
+ gpio_request(i, "PCI");
+
+ /* initialize our bogus bus */
+ dev_set_name(&bogus_pci_bus.dev, "PCI IRQ handler");
+ bogus_pci_bus.number = 0;
+
+ /* mask and clear all interrupts */
+ gemini_pci_write_config(&bogus_pci_bus, 0, GEMINI_PCI_CTRL2 + 2, 2,
+ 0xF000);
+
+ for (i = PCI_IRQ_BASE; i < PCI_IRQ_BASE + 4; i++) {
+ irq_set_chip_and_handler(i, &gemini_pci_irq_chip,
+ handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+
+ irq_set_chained_handler(IRQ_PCI, gemini_pci_irq_handler);
+
+ pci_common_init(&gemini_hw_pci);
+
+ return 0;
+}
+
+subsys_initcall(gemini_pci_init);