mirror of https://github.com/hak5/openwrt.git
44 lines
2.0 KiB
Diff
44 lines
2.0 KiB
Diff
diff -urN linux-2.6.19.2.old/arch/arm/mach-at91rm9200/at91rm9200_devices.c linux-2.6.19.2/arch/arm/mach-at91rm9200/at91rm9200_devices.c
|
|
--- linux-2.6.19.2.old/arch/arm/mach-at91rm9200/at91rm9200_devices.c 2007-05-01 13:08:02.000000000 +0200
|
|
+++ linux-2.6.19.2/arch/arm/mach-at91rm9200/at91rm9200_devices.c 2007-05-09 12:59:58.000000000 +0200
|
|
@@ -709,6 +709,10 @@
|
|
* We need to drive the pin manually. Default is off (RTS is active low).
|
|
*/
|
|
at91_set_gpio_output(AT91_PIN_PA21, 1);
|
|
+ at91_set_gpio_output(AT91_PIN_PB6, 1); /* DTR0 */
|
|
+ at91_set_gpio_output(AT91_PIN_PB7, 1); /* RI0 */
|
|
+ at91_set_gpio_input(AT91_PIN_PA19, 1); /* DCD0 */
|
|
+ at91_set_deglitch(AT91_PIN_PA19, 1);
|
|
}
|
|
|
|
static struct resource uart1_resources[] = {
|
|
@@ -820,6 +824,12 @@
|
|
{
|
|
at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */
|
|
at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */
|
|
+ at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */
|
|
+ at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */
|
|
+ at91_set_gpio_output(AT91_PIN_PB29, 1); /* DTR0 */
|
|
+ at91_set_gpio_output(AT91_PIN_PB2, 1); /* RI0 */
|
|
+ at91_set_gpio_input(AT91_PIN_PA24, 1); /* DCD0 */
|
|
+ at91_set_deglitch(AT91_PIN_PA24, 1);
|
|
}
|
|
|
|
struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
|
|
diff -urN linux-2.6.19.2.old/arch/arm/mach-at91rm9200/vlink_leds.c linux-2.6.19.2/arch/arm/mach-at91rm9200/vlink_leds.c
|
|
--- linux-2.6.19.2.old/arch/arm/mach-at91rm9200/vlink_leds.c 2007-05-01 13:08:03.000000000 +0200
|
|
+++ linux-2.6.19.2/arch/arm/mach-at91rm9200/vlink_leds.c 2007-05-09 12:58:42.000000000 +0200
|
|
@@ -114,12 +114,6 @@
|
|
|
|
at91_set_gpio_input(AT91_PIN_PB8, 1); // JIGPRESENT
|
|
at91_set_gpio_input(AT91_PIN_PB22, 1); // PWR_IND
|
|
- at91_set_gpio_input(AT91_PIN_PA19, 1); // P1DTR
|
|
- at91_set_gpio_input(AT91_PIN_PA24, 1); // P2DTR
|
|
- at91_set_gpio_output(AT91_PIN_PB29, 1); // P2DCD
|
|
- at91_set_gpio_output(AT91_PIN_PB2, 1); // P2RI
|
|
- at91_set_gpio_output(AT91_PIN_PB6, 1); // P1DCD
|
|
- at91_set_gpio_output(AT91_PIN_PB7, 1); // P1RI
|
|
|
|
at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX
|
|
at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
|